PROVISION OF CHAIN LINK FENCING AROUND SPORTS COMPLEX AT ICGS MAYABUNDER AND PROVISION OF ROAD SIDE FURNITURE AND DISPLAY BOARD AT MAYABUNDER

Amount

Excavation in post holes in hard/dence soil each n.exc 0.5 cum ,getting out ,returning ,filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm

M&L for PCC type C2 1:3:6 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 Gde E-165

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of anti corrossive paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC coating chain link fencing size of girth 50 x 50mm and size fixing in post and complete all as specified and directed

M&L hollow structural steel section (pipe sqyare/rectangular uysing ERW or induction but welded tubes conforming to IS-1161-1979) grade ST-240, with ends of pipes shoulder and/or riveted, or forged in to spikes, frame display/sign board frame and similar work conforming to FE-290 Gde E-165 complete all as specified.

S&F for 50mm bore (medium grade) galvanised steel tubing with all fittings fixed as in vertical posts for sign boards including necessary fabrication, proper closing at ends of tubes complete all as directed.

M&L for MS square tube of size 25x25mm, 16 SWG as in frame work for sign boards including necessary fabrication proper closing at ends of tubes and applying two coats metallic painting over a coat of metalic primer all as directed by Engr-in-Charge.

S&F retro reflective 2mm thick aluminium sheet, face fully covered with high intensity prismatic (Type-IV) Sheeting conforming to type-III of ASIDM-D 4956-01 as approved by GE with letters (Black,Roman, Italic or indian) including necessary stops, commas, short lines, dashes, brackets, etc (Number of alphabets not exceeding 30 Nos) index hands, (Natural size), or arrows (upto 400mm long) one number, borders etc as per IRC-67 in silver white with blue/green or any other colour background and with intensity grade, pasted on substrate by applying pressure sensitive adhesive backing which shall be activated by applying pressure confoirming to class II ASTDM-D-1956-01 and fixing the same to the structural frame work completed all as specified and directed.

S&F reflective road side deklineator of size 700x100x50mm ABS round body fitted with 2 Nos 100mm dia high reflective reflectors mounted on 50mm bore powder coated MS pipe with anti rust anti theft wiremesh duly embedded in PCC 1:3:6 type C-2 (using 40mm grade stone aggreagate) pedestal of size 300x300x300mm all as directed.

S&F two way road stud or plastic body reflective panel amber/red/white of size 100x100x25 fixed with screws or installed using epoxy adhesive and necessary earth work and PCC required all as specified and as per manufacturers instruction.

S&F Solar cat eyes of size 90x110x75mm fixing with adhesive and nails on road surdface all as specified and as per manufacturers instruction.

S&F 32 inches (80cm) dia polycorbonate convex mirror fibre moulded water proof and weather proof with pole mounted bracket all as specified and directes by Eng in Charge.

S&F yellow and black plastic speed hump made of ABS plate material, highly refelective reflectors mould in PMMA, materials welded with ABP plate through ultrsonic welding process etc. size of the speed bump is 350x500x50mm of 40ton load capacity or road incl epoxi for fixing speed bumps or road at diffrent places with necessary bolts/nuts etc. all as specified and as directed by Engr in Charge.

Prepration of new steel surface of any description over 10 cm in width or girth and applying two coats of aluminium paint over a coat of aluminium red oxide primer.

M&L for painting lines, dashes, arrows, letters etc. on roads pavement and the like n.exc. 10cm wide with road marking paint, white or golden yellow, adequate No. of coats

M/s Sharma Trading Company

RMS Construction

MOHAMMED SAFIQUE