Certain repair/maint works to joinery, sanitary fittings, plastering, sunken floor, internal water supply and misc works for MES installations and MES staff Qtrs under AGE B/R-I, GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor ,wall tiling etc completed all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement and sand mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisesetc completed all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc completed all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames nexc 1.5 Sq m with shutters (without taking off shutters from the frames) etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 4 above but exc 1.50Sqm and Nexc 4.00 Sqm

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm

Taking down steel windows/ventilator n exc 1.5 Sqm,any size with shutters (without taking off shutters from the frames) etc completed all as specified and directed by Engineer-in-Charge.

Dismantling of flase ceiling etc completed all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete solid block masonary built in cement and sand mortar etc completed all as specified and directed by Engineer-in-Charge.

Dismantling of asbestos cement (corrugated semi corrugated) sheets in roof covering etc completed all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc completed all as specified and directed by Engineer-in-Charge.

M & L for Taking up or down steel tubing 15 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

All as per item No 12 but 20mm bore

Dismantling of posts struts (wood,steel or RCC) any section taking out embeded portion and making good disturbed ground etc completed all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh any type and any descripition etc completed all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, area of WC exc 1.50 Sqm but nexc 5.00 Sqm etc after dismantling the existing sunken floor etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for pre-cast cement concrete block masonry with solid blocks, type C1 (1:3:6) (20 mm graded stone aggregate) exc. 10 cm in width and setting built in cement and sand mortar (1:6) etc completed all as specified and directed by Engineer-in-Charge.

Raking out joints/ pointing to brick/stone work in walls or to bricks on edge in floors, surface channels, roofs, etc to random rubble courses in cement/lime mortaretc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs to false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm suspended by 4 mm dia GI wire fixed to roof at 600 mm centre to centre as per manufacturere's instructions etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repair pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded stone aghregate etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 22 (here-in-before) but size 125mm x 60mm.

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubeetc completed all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, the shutter shall be fixed with and including stainless steel hinges 100mm size complete all as specified and directed.

S&F steel ventilator with top hung double shutter with side hung shutters i.e. glazed shutter from outside & gauged shutter inside incl hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded etc completed all as specified and directed by Engineer-in-Charge.

S&F steel windows double shutter with side hung shutters incl box/projecting type hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded etc completed all as specified and directed by Engineer-in-Charge.

S&F Steel windows or ventilators, fixed type, with glazing bars etc completed all as specified and directed by Engineer-in-Charge.

S&F mild steel barrel tower bolt 200mm long , stove enamelled black, with bright boltetc completed all as specified and directed by Engineer-in-Charge.

S&F mild steel sliding door bolts 300mm long , plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plateetc completed all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200mm long etc completed all as specified and directed by Engineer-in-Charge. .

S&F for mild steel pressed handles 150mm long , oval type , stove enamelled black etc completed all as specified and directed by Engineer-in-Charge.

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised handles of extruded section 150mm long etc completed all as specified and directed by Engineer-in-Charge.

M & L for block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work etc completed all as specified and directed by Engineer-in-Charge.

S&F expanded metal, weld mesh jali n.exc 4kg/sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanixed steel staples supplied and fixed complete to wood or steel members etc completed all as specified and directed by Engineer-in-Charge.

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) 30 mm etc completed all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

Material and labour for 3mm thich figured glass pin headed type glazing with oil putty, bead in squares n.exc 0.50 Sqm Each etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in Each pane etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repair wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix asbestos cement corrugated or semi currugated sheets, 6 mm thick in roofs, walls fixed with 'L' type or 'J' type or cranked hook bolts etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 46 (here-in-before) but except sheet

S&F asbestos cement pain angular ridge 6 mm thick fixed with L type or J type or cranked hook bolts etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and mortar (1:6), laid and jointed pointed in cement mortar (1:3 )etc completed all as specified and directed by Engineer-in-Charge.

All as per item no 49 (here-in-before) but except shahabad stone.

Material and labour for coloured glazed ceramic tiles of size exc 0.06 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for 60 mm thick, PCC pavers interlocking tiles glossy finish, any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc completed all as specified and directed by Engineer-in-Charge.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the floor etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 53 (here-in-before) but in skirting over screed 10mm th in cement and sand mortar (1:4)

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of Each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for 16-18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc completed all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of guage n. exc 63mm, of broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thcik, watered and rammed to a true surface etc completed all as specified and directed by Engineer-in-Charge.

Material and labour machine cut cudappah stone slab 18-20 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingetc completed all as specified and directed by Engineer-in-Charge.

Material and labour for Digitally printed paver tiles 300mm x 300mm having thickness of 10 mm thick as approved by GE of with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 15mm thick in cement and sand mortar (1:4) etc completed all as specified and directed by Engineer-in-Charge.

Material and labour for rendering, 10 mm thick on ceiling surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc completed all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in cement and sand mortar (1:6) on brick or concrete surface/ stone surfaces finishing even and smooth with thin layer of sagol finish etc completed all as specified and directed by Engineer-in-Charge.

M&L for rendering to 15 mm thick in cement and sand mortar (1:4) on brick/concrete/stone wall surfaces etc completed all as specified and directed by Engineer-in-Charge.

Dismantling of water tanks from any position/location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve, etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix tubular towel rail, brass chromium plated 60 cm long between flanges including a pair of brackets etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix mild Steel 20 mm dia decorative CP curtain rods with fixing brackets fixed in repairs etc completed all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 900x1200mm including screws etc completed all as specified and directed by Engineer-in-Charge.

Supply and fixe in repairs stainless steel kitchen sink matt finish without draining bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent ior equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010 (Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm of Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) of MARC or equivalentor equivalent makes mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 74 (here-in-before) but 1000 ltrs.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed etc completed all as specified and directed by Engineer-in-Charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 15/20mm dia bore pipe etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed by Engr-in-Charge.

Supply and fixing in repairs 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc completed all as specified and directed by Engineer-in-Charge.

All as per items ser No 79 (here-in-before) but 20mm bore.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs, grating 100 mm dia of PTMT etc completed all as specified and directed by Engineer-in-Charge.

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C 8610 of Parryware or euivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 84 (here-in-before) but 110 mm dia

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc completed all as specified and directed by Engineer-in-Charge.

All as per item No 86 (here-in-before) but 110 mm dia

S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal all as directed by Engineer-in-Charge. .

S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal all as directed by Engineer-in-Charge. .

M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:3 by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster.

M&L for providing waterproofing treatment on roof / chajja / parapet etc. as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site:- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer modified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel / mineral finished by thermofusion process.

M&L for preparing unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish etc completed all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint on newly / old plastered surfaces including preparation on walls all as directed by Engineer-in-Charge. .

M&L for two applying coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed by Engineer-in-Charge. .

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for newly / untreated steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed by Engineer-in-Charge. .

M&L for preparation of newly / old plastered surface and applying 2 coats of white wash on wall etc completed all as specified and directed by Engineer-in-Charge.

M&L for preparation of new / old plastered surface and applying 2 coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel angle iron for fencing posts and struts including cutting tops to shape, as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh including all necessary drilling, bolting or revetting etc and similar work conforming to Fe.290.Gde-E-165 etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel bolts, 10 mm dia and 65 mm long, purpose / machine made with hexagonal head or square hed one end and crewed on other end, each screwed end to be fitted with washer and on hexagonal or square nut all as directed by Engineer-in-Charge. .

Fixing only chain link fencing including line wires, any mesh,size & type to any type of standards, rails straining bolts etc including provision of binding wire all as directed by Engineer-in-Charge.. NOTE: Chain link fencing shall be measured and paid as separately as supply only.

Supply only chain link fencing made cut from GI wire 10 gauge and 50 mm apperture weight not less than 3 Kg / Sqm etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in reapirs galavanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as directed by Engineer-in-Charge.. NOTE: Each line of wire to be measured.

M & L for FI 40x6mm for fixing with chain link fencing & post and 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking, binding cutting etc completed all as specified and directed by Engineer-in-Charge.

S&F Steel rolling shutters, thickness of lath 1mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type all as directed by Engineer-in-Charge..

Material and labour for TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not les than 0.90 mm dia etc completed all as specified and directed by Engineer-in-Charge.

M&L for cleaning of service tank up to 1000 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algea from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank and writing date of cleaning on tank with synthetic enamel paint size of alphabet / unmerical shall be minimum 7cm etc completed all as specified and directed by Engineer-in-Charge.

Supply and fix in repair nahani trap with 100 mm dia grating incl 75mm dia PVC bend to fixing with drain pipe and floor tiles on broken area n.exc 1.00 sqm area in kitchen or bathroom etc completed all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/dense soil.

M&L for Cement concrete Type D2 (1:4:8) (40mm graded stone aggregate) as in foundations, filling and mass concrete etc completed all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc completed all as specified and directed by Engineer-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc completed all as specified and directed by Engineer-in-Charge.

Supply and spread fine dry river sand for cushioning of cables in layer not exc 25cm thick including ramming/punning including taking out old sand & removal etc completed all as specified and directed by Engineer-in-Charge.

An amount of Rs 70,845.00 shall be deducted from BOQ on account of schedule of credit

M/s Meher Construction

OM SAI ASSOCIATES

M/S. M. F. Sharif & Co.

M/s IBEX Engineers and Contractors

Takshashila electricals

Neha Enterprises

M/S-B.R.SONAWANE

M/s. N D Karande