CWE/KAS-82/2026-27 REPAIR/ MAINTENACE OF HT ELECTRIC INSTALLATIONS, TRANSFORMERS, VCBs, OH LINES and OTHER CONNECTED ITEMS AT KASAULI UNDER GE KASAULI

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in hard/ dense soil for stay assembly/ laying of pipe line/ laying of cable/ erection of poles etc complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 1.00 here-in-before but depth exceeding 1.5 metre but not exceeding 3.0 metre depth complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, complete all as specified and as directed by Engineer-in-Charge.

Removing of surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above starting point complete all as specified and as directed by Engineer-in-Charge.

Supply, laying & testing of XLPE insulated, 11000 Volts grade 'Heavy duty' PVC sheathed armoured cable HT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 95 Sqmm nominal cross sectional area 3 core with suitable glands and lugs as per site requirement confirming to IS specifications, complete all as specified and as directed by Engineer-in-charge.

M&L for double walled corrugated HDPE duct pipe of 110mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection and taking down of unsv pipe complete all as specified & directed.

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP–55), 11 metre long, complete with cast iron base plate, pole cap/ finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal welded throughout entire length of pole with and including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole finished with one coat of red oxide primer and two coats of synthetic enamel paint including writing pole No. including taking down old unsv pole, any type complete all as specified and directed by Engineer-in-Charge. Note :- Earth work and foundation of PCC shall be measured and paid separately in relevant items of schedule.

M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating with & incuding necessary use and waste of form work for fair faces of concrete, complete all as specified and as directed by Engineer-in-Charge.

S&F pin type insulator, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 150 mm dia and 150 mm height for 11000 volts grade fixed on existing pole complete all as specified and directed by Engineer-in-charge.