A) Creation of Herbal Garden with landscaping and Irrigation facilities in OSR Nos. 2 and 3 of SIPCOT Medical Device Park, Oragadam

Amount

CREATION OF HERBAL GARDEN WITH LANDSCAPING (OSR -2)

EARTH WORK

Earth work excavation and depositing on bank with initial lead and lift in all soils except hard rock requiring blasting ,and conveyed with an initial lead and lift for foundation as per SS 20 B Specifications etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supplying and Gravel filling for land formation, for mounds sides of retaining walls, planter boxes including consolidating the earth with a lead of 20 km including all necessary incidental charges, loading, unloading etc., complete and as per standard specification and as directed by the SIPCOT Officers.

CIVIL WORKS

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 with using uniform thickness of 0.15m and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and laying Plain cement concrete 1:4:8 for foundations to the specified depth using graded granite aggregate of 40mm and down size, including mixing, compacted by wooden or cast iron rammers, curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm and down gauge) including cost of reinforcement, centring, shuttering and reinforcement and cured etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and fabricating HYSD Steel reinforcement including straightening, cutting, bending, hooking, lapping and/or welding wherever required, placing in position tieing with binding wire of approved quality and gauge including the cost of binding wire and anchoring to the adjoining members where ever necessary including all laps and wastages etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and constructing 150 mm thick Solid cement block masonry work at all levels with approved quality Solid concrete block in cement mortar 1:6 using Apco or equivalent precast blocks of 400 x 200 x 150 mm size with minimum crushing strength of 35 kg/sq. cm in cement mortar 1:6 (1 of cement and 6 parts of sand) for walls of thickness 150mm with cement pointing, including curing, scaffolding etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supplying, Installation and fixing in position with best quality Fine Polished "GRANITE SLABS" of size 18- 20 mm thick with machine cut edges laid true to line in both directions with minimum possible width of joints in cement mortar 1:3 (One cement and three sand) 20mm thick and pointing the joints to full depth of Granite slabs neatly with white cement mixed with matching colour best quality colouring pigments etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing, fabricating M.S. Structure members to details including the costing of welding, fixing , labour charges and applying a quote of primer to detail etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing, fabricating M.S.roof for Gazebo etc., complete as per standard specification and as directed by the SIPCOT Officers.

HARDSCAPE WORKS

Supplying and laying of 83mm thick rubber moulded Hydralic pressed paver block interlocking over a nice Msand with required design meeting their international standard size with Zig Zag design with higher loading capacity rate including cost and conveyance of all required materials at site and all labour charges for laying, compacting with paver vibrator etc., m sand)

Supply, installation and fixing at site precast cement concrete of size 600 mm x 300 mm x 125 mm M35 grade Bullnose finished Kerb of Sobha or equivalent using 20mm and down granite metal , to be placed vertically,including cost of materials, labour, curingetc., complete as per standard specification and as directed by the SIPCOT Officers.

EXTERNAL LIGHTING ONLY FIXTURES

Supply and fixing of Post tops (Polar series) KP -4866- 30W LED -3000MM ht or equivalent, including necessary foundation arrangements, bolts, nuts etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply and fixing of Bollard Light Mushroom Flat top Bollard - 4719-M9- 16W LED - 445MM, or equivalent, including necessary foundation arrangements, bolts, nuts etc., complete etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply and providing of Electricity wiring infrastructure for (item 4.01 and 4.02) with all accessories etc., complete as per standard specification and as directed by the SIPCOT Officers.

SOFTSCAPE

Cleaning and Digging up existing ground to a depth of 150 mm , excavation of unwanted soil / debris and carting out of site upto 3 Km and Formation of ground as per drawings etc., complete as per standard specification and as directed by the SIPCOT Officers.

Sweet Garden Soil : Supply and spreading garden soil mix to required depth as per design details etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply of Farm yard Manure /vermicopost/Organic Manure (For Plants& Trees) @ 5% of total soil qty etc., complete as per standard specification and as directed by the SIPCOT Officers.

River sand : Supply and blending garden soil mix to required depth as per design details in the ratio of 10% of total qty etc., complete as per standard specification and as directed by the SIPCOT Officers.

Manure - Oraganic Pesticide Supply of neem cake (0.5kg/1sq.mt) etc., complete as per standard specification and as directed by the SIPCOT Officers.

OUTDOOR LANDSCAPE ELEMENTS

Supplying and fixing in position ferrocement/stone/FRP external furniture of approved shapes, sizes as specified etc., complete as per standard specification.The rate shall be inclusive of design charges, transporation loading ,unloading charges, approved paint works and civil works at site providing structureal support for stability as required etc complete and as directed by the SIPCOT Officers.

Medicinal Plants -Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Abrus precatorius

Acacia catechu

Acalypha indica

Achyranthes aspera

Acorus calamus

Adhatoda zeylanica

Aegle marmelos

Aerva lanata

Alangium salvifolium

Albizia lebbeck

Aloe vera

Alstonia scholaris

Andrographis paniculata

Anisomeles malabarica

Aristolochia indica

Artemesia nilagirica

Asparagus racemosus

Azadirachta indica

Bacopa monnieri

Barleria prionitis

Bauhinia racemosa

Boerrhavia diffusa

Butea monosperma

Caesalpinia bonduc

Calotropis gigantea

Cardispermum halicacabum

Carmona retusa

Cassia auriculata

Cassia fistula

Celastrus paniculatus

Centella asiatica

Cissus quadrangularis

Clerodendrum phloemedis

Clitoria ternatea

Cocculus hirsutus

Coleus aromaticus

Coscinium fenestratum

Curculigo orchioides

Curcuma longa

Datura metel

Eclipta alba

Gmelina arborea

Gymnema sylvestre

Helicteres isora

Hemidesmus indicus

Hydnocarpus pentandra

Hygrophylla auriculata

Jasminum auriculatum

Jasminum sambac

Lawsonia inermis

Leucas aspera

Madhuca longifolia

Mallotus philippensis

Nyctanthes arbor -tristis

Ocimum basilicum

Ocimum tenuflorum

Phyllanthus emblica

Piper longum

Piper nigrum

Plumbago zeylanica

Pongamia pinnata

Pterocarpus marsupium

Pterocarpus santalinus

Punica granatum

Rhinacanthus nasutus

Rubia cordifolia

Sansevieria zeylanica

Santalum alba

Saraca asoca

Sesbania garndiflora

Sida acuta

Solanum indicum

Solanum xanthocarpum

Stereospermum tetragonum

Strychnos nux-vomica

Syzygium cumini

Tephrosia purpurea

Terminalia arjuna

Terminalia bellirica

Terminalia chebula

Thespasia populnea

Tinospora cordifolia

Toddalai asiatica var.floribunda

Tribulus terrestris

Tylophora indica

Vetiveria zizanoides

Vitex negundo

Withania somnifera

Wrightia tinctoria

Zingiber officinale

Ziziphus mauritiana

Ziziphus oenoplia

CREATION OF HERBAL GARDEN WITH LANDSCAPING (OSR 3)

EARTH WORK

Gravel filling with a lead of 20 Km for land formation, for mounds sides of retaining walls, planter boxes including consolidating the earth etc., complete as per standard specification and as directed by the SIPCOT Officers.

CIVIL WORKS

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 using uniform thickness of 0.15m and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges,etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and laying Plain cement concrete 1:4:8 for foundations of following to the specified depth using graded granite aggregate of 40mm and down size, including mixing, compacted by wooden or cast iron rammers, curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm and down gauge) including cost of reinforcement, centring, shuttering and reinforcement and cured etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and fabricating HYSD Steel reinforcement including straightening, cutting, bending, hooking, lapping and/or welding wherever required, placing in position tieing with binding wire of approved quality and gauge including the cost of binding wire and anchoring to the adjoining members where ever necessary including all laps and wastages etc,complete as per design and specification etc., complete as per standard specification and as directed by the SIPCOT Officers.

Brick Work in Cement Mortar 1:5 using second class ground moulded chamber bricks of size 9" x 4 3/8" x 2 3/4 " including cost and conveyance of all materials at site and all labour charges etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing 20mm thick plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding including cost of materials, labour, curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Painting two coats with approved water based EMULSION PAINT over one priming coat over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Plastering with cement mortar 1:3 (One cement, and Three plastering sand) 20 mm thick mixed with proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supplying, Installation and fixing in position with best quality Fine Polished "GRANITE SLABS" of size 18- 20 mm thick with machine cut edges laid true to line in both directions with minimum possible width of joints in cement mortar 1:3 (One cement and three sand) 20mm thick and pointing the joints to full depth of Granite slabs neatly with white cement mixed with matching colour best quality colouring pigments etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing, fabricating M.S. Structure members to details including the costing of welding, fixing , labour charges and applying a quote of primer to detail etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, delivery and erection of Solar Power installation and setuup etc., complete as per standard specification and as directed by the SIPCOT Officers.

HARDSCAPE WORKS

Supplying and laying of 83mm thick rubber moulded Hydralic pressed paver block interlocking over a stone dust cussion and pointed with nice M-sand with required design meeting their international standard size with Zig Zag design with higher loading capacity rate including cost and conveyance of all required materials at site and all labour charges for laying, compacting with paver vibrator etc., complete complying with standard specification and as directed by SIPCOT Officers. (Including cost of stone dust)

Supply, installation and fixing at site precast cement concrete of size 600 mm x 300 mm x 125 mm M35 grade Bullnose finished Kerb of Sobha or equivalent using 20mm and down granite metal , to be placed vertically,including cost of materials, labour, curing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Providing and supplying stone pergolas as per design including fixing charges etc., complete as per standard specification and as directed by the SIPCOT Officers.

EXTERNAL LIGHTING ONLY FIXTURES

Supply and fixing of Post tops (Polar series) KP -4866- 30W LED 3000MM ht or equivalent including necessary foundation arrangements, bolts, nuts etc., - complete as per standard specification and as directed by the SIPCOT Officers.

Supply and fixing of Bollard Light Mushroom Flat top Bollard - 4719-M9- 16W LED - 445MM or equivalent including necessary foundation arrangements, bolts, nuts etc., complete as per standard specification and as directed by the SIPCOT Officers.

Electricity wiring infrastructure for (item 10.01 and 10.02) with all accessories etc., complete as per standard specification and as directed by the SIPCOT Officers.

Solar electricity works etc., complete as per standard specification and as directed by the SIPCOT Officers.

SOFTSCAPE

Cleaning and Digging up existing ground to a depth of 150 mm , excavation of unwanted soil / debris and carting out of site upto 3 Km and Formation of ground as per drawing etc., complete as per standard specification and as directed by the SIPCOT Officers.

Sweet Garden Soil : Supply and spreading garden soil mix to required depth as per design details etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply of Farm yard Manure /vermicopost/Organic Manure (For Plants& Trees) @ 5% of total soil qty etc., complete as per standard specification and as directed by the SIPCOT Officers.

River sand : Supply and blending garden soil mix to required depth as per design details in the ratio of 10% of total qty etc., complete as per standard specification and as directed by the SIPCOT Officers.

Manure - Oraganic Pesticide Supply of neem cake (0.5kg/1sq.mt) etc., complete as per standard specification and as directed by the SIPCOT Officers.

IRRIGATION - MANUAL IRRIGATION WORKS

Pipes Work: Supply, laying & commissioning in position following PVC pipe conforming to IS:4985:2000 and suitable for the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 75mm-10 kg/cm² Basement Mainline etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 75mm-10 kg/cm² Ground Mainline etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 50mm-6 kg/cm² etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 40mm-6 kg/cm² etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 25mm-10 kg/cm² etc., complete as per standard specification and as directed by the SIPCOT Officers.

PVC pipe 20mm-10 kg/cm² etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply and fixing of necessary PVC fittings for above pipes

Earth work excavation for pipelaying works and refilling 300x450mm etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 8mm Anchor fasteners, 8mm Threaded Rod, Universal Clamp, Channel, Threaded U Clamp, for below podium work etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of MS Bracket fabricated from L-Angle with Anchor Bolts as wall/floor clamping etc., complete as per standard specification and as directed by the SIPCOT Officers.

DRIP & ACCESSORIES

Supply, Fixing & Commissioning of flexible 16mm inline tubing PC Drippers with resistance to UV damage, algae growth brown in colour, Longer lateral run lengh with flow rate 2.3lph / 4.0 lph, pressure rating 0.58 to 4.1 bar , Dripper Spacing at 30 cm / 45 cm Spacing wall thickness 1.2mm etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 88 gpm (20m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 40mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steal Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion -Resistant of TIE DOWN STAKE etc., complete as per standard specification and as directed by the SIPCOT Officers.

SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 2.4m -7.3m at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete as per standard specification and as directed by the SIPCOT Officers.

VALVES & ACCESSORIES

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of a double acting air and vaccum release 2" Air release valve. The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 KSCetc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 6" Round box with greenlid with features Snap-in overlapping lid, Skid-resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions @ TTop Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply, Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete as per standard specification and as directed by the SIPCOT Officers.

FILTRATION UNIT

Supply, Fixing & commissioning of 2.5" Disc Filter with capacity 40m3/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars etc., complete as per standard specification and as directed by the SIPCOT Officers.

PUMPING UNIT

Supply,Fixing & commissioning of Monobloc pumpset of having discharge and head of design flow , UPVC sch 40 - suction & delivery manifold and mounted on a baseframe with proper supports etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Duty of Pump : 4.50LPS, Pressure Head Range = 50 - 55 Mtr, No. of Pumps : 1 Working + 1 Standby etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL / Star Delta Starter MUG10 (L&T make),start / stop push buttons (L&T make), Ammeter (AE make), Single phase preventor (Minilec make), Voltmeter (AE make) , Indicating lamps (L & T make), MCB (L & T make), Dry level guard sensor (Minilec make) etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on the pump capacity etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 2.5'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of 2.5'' Non Return Valve to prevent back flow have flap type or spring type with pressure rating of PN 10 etc., complete as per standard specification and as directed by the SIPCOT Officers.

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete as per standard specification and as directed by the SIPCOT Officers.

OUTDOOR LANDSCAPE ELEMENTS

Outdoor Seating

PART I C - MAINTENANCE COST OF FIRST YEAR OF MEDICAL DEVICE PARK GARDEN AND NURSERY

Payable Cost for One family which stays inside the project area per month etc., complete as per standard specification and as directed by the SIPCOT Officers.

Cost of Gardening tools and tackless per quarter (Purchase for 3Months once) etc., complete as per standard specification and as directed by the SIPCOT Officers.

Monthly cost for Organic manure, Pesticides, Pest repellents, Foliar spray etc., complete as per standard specification and as directed by the SIPCOT Officers.

Consultancy charges of experts from reputed firms (Two time visit per Month) etc., complete as per standard specification and as directed by the SIPCOT Officers.

Engagement of 4 nos of labours daily. The cost to be quoted on monthly basis, which is as per standard specification and as directed by the SIPCOT Officers.

Primary Health care Plants -Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acorus calamus

Adhatoda zeylanica

Aloe vera

Alternanthera sessilis

Bacopa monnieri

Cassia auriculata

Centella asiatica

Cissus quadrangularis

Clitoria ternatea

Coleus ambonicus

Cymbopogon citratus

Eupatorium triplinerve

Hemigraphis colorata

Hibiscus rosa-sinensis (Red)

Hibiscus rosa-sinensis(white)

Kalanchoe pinnata

Lawsonia inermis

Murraya koenigii

Ocimum basilicum

Ocimum gratissimum

Ocimum tenuiflorum (green)

Piper longum

Ruta graveolens

Sansevirea roxburghiana

Vetiveria zizanioides

Vitex negundo var.negundo

Vitex negundo var.purpurascens

Wedelia chinensis

Withania somnifera

Women and child health care plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acacia catechu

Acacia nilotica sub sp.indica

Acorus calamus

Aloe vera

Asparagus racemosus

Centella asitica

Helicteres isora

Phyllanthus emblica

Piper longum

Piper nigrum

Pterocarpus santalinus

Saraca asoca

Syzygium cumini

Terminalia chebula

Tinospora cordifolia

Woodfordia fruticosa

Zingiber officinale

Medicinal root and rhizome - Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Abroma angusta

Aegle marmelos

Alangium salvifolium

Alpinia calcarata

Alpinia galanga

Alstonia venenata

Baliospermum montanum

Costus speciosus

Curculigo orchioides

Curcuma amada

Curcuma angustifolia

Curcuma aromatica

Curcuma caesia

Curcuma longa

Curcuma zeodaria

Hedychium coronarium

Hedychium flavences

Hemidesmus indicus

Kaempferia galanga

Oroxylum indicum

Premna serratifolia

Pseudarthria viscida

Rotheca serrata

Rubia cordifolia

Salacia chinensis

Sida acuta

Sida cordifolia

Sida rhombifolia

Vetiveria zizanioides

Withania somnifera

Stereospermum tetragonum

Gmelina arborea

Solanum indicum

Solanum xanthocarpum

Abrus precatorius

Zingiber officinale

Zingiber zerumbet

Plumbago zeylanica

Medicinal leaves- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Aegle marmelos

Allium nigrum

Alocasia indica

Aloe vera

Bacopa monnieri

Bauhinia racemosa

Begonia malabarica

Centella asiatica

Colacasia esculenta

Coleus aromaticus

Costus pictus

Eupatorium triplinerve

Gymnema sylvestre

Kalanchoe pinnata

Leea indica

Leucas aspera

Mentha arvensis

Mentha piperita

Mentha spicata

Mentha viridis

Mussanda frondosa

Ocimum tenuiflorum

Orthosiphon stamineus

Remusatia vivipara

Rosmarinus officinalis

Polygonum chinensis

Abrus precatorius

Murraya koenigii

Cocculus hirsutus

Tinospora cordifolia

Cymbopogon citratus

Sauropus androgynus

Medicinal flowers- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Adhatoda zeylanica

Artemisia nilagirica

Azadirachta indica

Bauhinia purpurea

Bixa orellana

Butea monosperma

Cassia fistula

Elaegnus conferta

Ervatamia coronaria

Hemidesmus indicus

Hibiscus rosa-sinensis

Jasminum auriculatum

Mesua ferrea

Michalia champaca

Mimosops elengi

Moringa oleifera

Mussa paradisiaca

Ocimum sanctum

Pterospermum acerifolium

Punica granatum

Rosa damscena

Saraca asoca

Sesbania grandifolia

Spilanthus olearacea

Stereospermum tetragonum

Vitex negundo

Woodfordia fruticosa

Cassia auriculata

Phlogocanthus thyrsiflorus

Nyctanthes arbortristis

Clitorea ternatea

Medicinal Stems and Barks- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acacia leucophloea

Albizia lebbeck

Alstonia scholaris

Anogeissus latifolia

Anthocephalus kadamba

Aphanamixis polystachya

Bombax ceiba

Caesalpinia sappan

Crataeva magna

Dichrostachys cinerea

Erythrina stricta

Ficus recemosa

Helecteres Isora

Holarrhena pubescens

Holoptelea integrifolia

Nothapodytes nimmoniana

Pterocarpus marsupium

Saraca asoca

Terminalia arjuna

Wrightia tinctoria

Zanthoxylum rhetsa

Dalbergia sissoo

Terminalia arjuna

Casssia auriculata

Medicinal Stems - Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Chonemorpha fragrans

Tinospora cordifolia

Tinospora sinensis

Basella alba

Medicinal fruits- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Adhatoda zeylanica

Aegle marmelos

Aglaia elaegnaoidea

Alangium salvifolium

Annona muricata

Annona reticulata

Annona squamosa

Artocarpus hirsutus

Artocarpus lakucha

Averrhoa carambola

Carissa carandas

Citrus limon

Clausena anisata

Cordia obliqua

Dillenia indica

Elaeagnus conferta

Elaeocarpus oblongus

Eleagnus kologa

Ficus palmata

Flacourtia indica

Flacourtia montana

Garcinia gummi-gutta

Garcinia indica

Garcinia xanthochymus

Gmelina arborea

Limonia acidissima

Mangifera indica

Mimusops elengi

Phoenix sylvestris

Phyllanthus emblica

Piper longum

Piper nigrum

Punica granatum

Salacia chinensis

Schleichera oleosa

Scutia myrtina

Solanum nigrum

Solanum torvum

Spondias pinnata

Syzygium caryophyllatum

Syzygium cumini

Ziziphus mauritiana

Ziziphus oenoplia

Medicinal Seeds- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Abrus precatorius

Acalypha fruticosa

Achyranthes aspera

Aegle marmelos

Alangium salvifolium

Argyreia speciosa

Aristolochia indica

Artocarpus heterophyllus

Atalantia monophylla

Azadirachta indica

Bambusa arundinaceae

Bombax ceina

Butea monosperma

Callicarpa tomentosa

Callophyllum inophullum

Caryota urens

Celastrus paniculatus

Centratherum punctatum

Coriandrum sativum

Dimocarpus longan

Drypetes roxburghii

Eclipta alba

Holarrhena pubescens

Lawsonia inermis

Madhuca longifolia

Mangifera indica

Nyctanthus arbortristis

Ocimim basilicum

Phoenix sylvestris

Phyllanthus emblica

Plantago major

Pongamia pinnata

Punica granatum

Quisqualis indica

Semicarpus anacardium

Strychnos nux-vomica

Strychnos potatorum

Swietenia mahagaony

Syzygium cumini

Terminalia chebula

Thepesia populnea

Wedelia chinensis

Withania somnifera

Wrightia tinctoria

Medicinal plant arboretum- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acacia chundra

Acacia nilotica sub sp.indica

Acrocarpus fraxinifolius

Adansonia digitata

Adenanthera pavonina

Adina cordifolia

Aegle marmelos

Aglaia elaegnaoidea

Ailanthus excelsa

Ailanthus triphysa

Alangium salvifolium

Albizia amara

Albizia lebbeck

Albizia odoratissima

Alstonia scholaris

Anogeissus latifolia

Anthocephalus kadamba

Aphanamixis polystachya (Wall.) Park

Artocarpus hirsutus

Artocarpus lakucha

Azardirachta indica

Barringtonia acutangula

Bauhinia purpurea

Bauhinia racemosa

Bischophia javanica

Bombax ceiba

Bridelia retusa

Butea monosperma

Caesalpinia sappan

Calophyllum apetalum

Calophyllum inophyllum

Canarium strtictum

Careya arborea

Caryota urens

Cassia roxburghii

Cedrella toona

Chukrasia tabularis

Cinnamomum camphora

Cinnamomum verum

cordia obliqua

Couroupita guianensis

Dalbergia latifolia

Dalbergia sissoo

Dillenia indica

Elaeocarpus sphaericus

Erythrina stricta

Garcinia indica

Garcinia xanthochymus

Hardwickia binata Roxb.

Helecteres Isora

Lagerstroemia indica

Limonia acidissima

Madhuca longifolia

Madhuca longifolia var. latifolia

Madhuca neriifolia

Mangifera indica

Memecylon malabaricum

Mesua ferrea

Michelia champaka

Mimusops elengi

Murraya arborea

Myristica fragrans

Nyctanthus arbor-tristis

Oroxylum indicum

Phyllanthus emblica

Pongamia pinnata

Prosopis cineraria

Pterocarpus marsupium

Pterocarpus santalinus

Pterygota alata

Putranjiva roxburghii

Salix tetrasperma

Santalum album L.

Sapindus emerginatus

Sapindus laurifolius

Saraca asoca

Schleichera oleosa

Semecarpus anacardium

Soymida febrifuga

Spondias pinnata

Sterculia foetida

Sterculia urens

Strychnos nux-vomica

Swietenia macrophylla

Swietenia mahagony

Syzygium caryophyllatum

Syzygium cumini

Terminalia arjuna

Terminalia bellirica

Terminalia chebula

Thespesia populnea

Trewia nudiflora

Vitex leucoxylon

Vitex negundo

Vitex negundo var. pupurascens

Vitex trifolia

Wrightia tinctoria

Ziziphus mauritiana

Ficus dalhousiae Miq.

Ficus hispida

Ficus palmata

Ficus virens

Filicium decipiens

Melia dubia

Red Listed Plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Adenia hondala

Adhatoda beddomei

Baliospermum montanum

Canarium strictum

Celastrus paniculatus

Chonemorpha fragrans

Commiphora wightii

Coscinium fenestratum

Cycas circinalis

Decalepis hamiltonii

Garcinia gummi-gutta

Garcinia indica

Hedychium coronarium

Kaempferia galanga

Madhuca neriifolia

Moringa concanensis

Nilgirianthus ciliatus

Nothapodytes nimmoniana

Oroxylum indicum

Persea macrantha

Piper longum

Piper nigrum

Plectranthus vettiveroides

Pseudarthria viscida

Pterocarpus santalinus

Rauvolfia serpentina

Rhaphidophora pertusa

Santalum album

Saraca asoca

Tinospora sinensis

Aromatic plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Anisomeles malabarica

Artemisia nilagirica

Artemisis vulgaris

Hedychium coronarium

Hedychium flavences

Jasminum sambac

Majorana hortensis

Ocimum basilicum var.basilicum

Ocimum tenuiflorum

Coleus zeylanicus

Pogostmon pacholi

Ruta graveolens

Artabotrys odoratissimus

Chonemorpha fragrans

Magnolia champaca

Mimusops elengi

Ocimum grattisimum

Ocimum basilicum

Artemisia distimilar

Artemisia vulgaris

Dye yielding plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acacia catechu

Achyranthes aspera

Adenanthera pavonina

Adhatoda zeylanica

Aegle marmelos

Aerva lanata

Ailanthus triphysa

Aloe barbadensis

Alpinia calcarata

Annona reticulata

Asparagus racemosus

Azadirachta indica

Bacopa monnieri

Barleria prionitis

Basella alba

Bauhinia purpurea

Bauhinia tomentosa

Bixa orellana

Boerhavia diffusa

Breynia retusa

Butea monosperma

Caesalpinia pulcherrima

Caesalpinia sappan

Calophyllum inophyllum

Calotropis gigantea

Cardiospermum helicacabum

Cassia alata

Cassia auriculata

Cassia fistula

Cinnamomum zeylanicum

Cleistanthus collinus

Clitoria ternatea

Coleus amboinicus

Coleus zeylanicus

Curcuma longa

Curcuma zedoaria

Cymbopogon citratus

Dalbergia latifolia

Datura metel

Diospyros melanoxylon

Dodonaea viscosa

Eclipta alba

Ervatamia divaricata

Euphorbia tirucall

Garcinia indica

Garcinia xanthochymus

Hedychium coronarium

Hemidesmus indicus

Hibiscus rosa-sinensis

Hibiscus rosa-sinensis (Red-flowered)

Hibiscus rosa-sinensis (White-flowered)

Holarrhena pubescens

Hopea parviflora

Hymenodictyon excelsum

Indigofera longiracemosa

Jasminum grandiflorum

Jatropha curcas

Kaempferia rotunda

Lawsonia inermis

Leucas aspera

Madhuca latifolia

Madhuca longifolia

Mallotus philippensis

Mangifera indica

Melastoma malabathricum

Morinda citrifolia

Morus alba

Murraya koenigii

Naregamia alata

Nerium odorum

Nyctanthes arbor-tristis

Ocimum sanctum (Green)

Ocimum sanctum (Purple)

Oxalis corniculata

Phyllanthus acidus

Phyllanthus amarus

Phyllanthus emblica

Phyllanthus reticulatus

Pithecellobium dulce

Plumbago rosea

Plumbago zeylanica

Pongamia pinnata

Pterocarpus santalinus

Punica granatum

Rauvolfia tetraphylla

Ruta graveolens

Sesbania sesban

Spondias pinnata

Strychnos nux-vomica

Syzygium cumini

Tagetes minuta

Tamarix aphylla

Terminalia chebula

Thespesia lampas

Thespesia populnea

Tinospora cordifolia

Toona ciliata

Vernonia cinerea

Vitex negundo var. negundo

Woodfordia floribunda

Wrightia tinctoria

Zingiber officinale

Aquatic plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Aponogeton natans

Caldesia parnassifolia

Ceratophyllum demersum

Cyperus articulatus

Eleocharis atropurpurea

Ferns

Hydrilla aquatica

Ipomoea aquatica

Lagenandra ovata

Limnophila indica

Ludwigia adscendens

Monochoria vaginalis

Myriophyllum aquaticum

Myriophyllum reticulatum

Najas graminae

Nelumbo nucifera

Neptunia oleracea

Nymphaea cerulea

Nymphaea pubescens

Nymphaea stellata

Nymphoides aquatica

Nymphoides indica

Ottelia alismoides

Polygonum chinensis

Polygonum glabrum

Potamogeton perfoliatus

Rotala fimbriata

Saggitaria latifolia

Trapa bispinosa

Utricularia spp.

Vallisneria spiralis

Pollination meadow- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Acacia chundra

Acacia nilotica sub sp.indica

Adhatoda zeylanica

Aegle marmelos

Aristolochia indica

Aristolochia littoralis

Asclepias curassavica

Calotropis gigantea

Careya arborea

Citrus limon

Clematis gouriana

Couroupita guianensis

Crotalaria retusa

Kalanchoe bhidei

Kalanchoe pinnata

Kleinia grandiflora

Leea indica

Orthosiphon stamineus

Pavetta Indica

Plumbago rosea

Plumbago zeylanica

Premna serratifolia

Rauvolfia tetraphylla

Rhinacanthus nasutus

Saraca asoca (Roxb.) W.J. de Wilde

Toddalia asiatica var.floribunda

Tylophora indica

Vitex negundo

Vitex negundo var. pupurascens

Vitex trifolia

Exudation/gum yielding plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Canarium strictum

Vateria indica

Acacia nilotica

Anogeissus latifolia

Ailanthus triphysa

Commiphora wightii

Ficus dalhousiae

Pterocarpus marsupium

Bombax ceiba

Bursera delphigiana

Caesalpinia sappan

Plants used in Veterinary - Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Achyranthes aspera

Bambusa arundinacea

Caesalpinia bonduc

Calotropis gigantea

Caryota urens

Cissus quadrangularis

Citrus lemon

Cocus nucifera

Curcuma aromatica

Dodonaea viscosa

Garcinia xanthochymus

Leucas aspera

Mimosa pudica

Pandanus odoratissimus

Pergularia daemia

Securinega leucopyrus

Solanum nigrum

Toddalia asiatica var. gracilis

Tylophora asthmatica

Vallaris solanacea

Vitex negundo

Wrightia tinctoria

Moringa oleifera

Andrographis paniculata

Ocimum bsilicum

Riparian plants- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Bischofia javanica Blume

Breynia vitis-idaea

Bridelia crenulata Roxb.

Celtis timorensis

Cipadessa baccifera (Roth) Miq.

Derris scandens (Roxb.) Benth

Diospyros malabarica (Desr.) Kostel.

Ficus hispida L.f.

Ficus microcarpa L.f.

Ficus mollis Vahl

Ficus racemosa L.

Filicium decipiens (Wight & Arn.) Thw.

Glycosmis mauritiana (Lam.) Tanaka

Homonoia riparia Lour.

Lagerstroemia microcarpa Wight

Madhuca neriifolia (Moon) H.J. Lam.

Mangifera indica L.

Memecylon umbellatum Burm.

Mimusops elengi L.

Mitragyna parvifolia (Roxb.) Korth.

Olea dioica Roxb.

Pandanus odoratissimus L.f.

Phyllanthus polyphyllus Willd.

Phyllanthus reticulatus Poir.

Pongamia pinnata (L.) Pierre

Salix tetrasperma Roxb.

Spondias pinnata (L.f.) Kurz

Syzygium cumini (L.) Skeels

Terminalia arjuna

Trewia nudiflora L.

Vitex leucoxylon L.f.

Saccharum spontaneum

Vettiveria zizanioides

Acorus calamus

Syzygium travancoricum

Syzygium caryophyllatum

Calophyllum apetalum

Proverb garden- Supplying and planting healthy saplings as per plant list, grown in 1 to 5 litre bags with a trunk height of at least 0.5 metres and well formed root system, in pits of size 45cm dia and 45cm depth including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Abrus precatorius

Acacia nilotica ssp. indica

Adhatoda zeylanica

Aegle marmelos

Alleum cepa

Aloe vera

Alternanthera sessilis

Amorphophallus campanulatus

Atrocarpus heterophyllus

Borassus flabelliber

Cardiospermum halicacabum

Carissa carands

Cassia auriculata

Centella asiatica

Dichrostachys cinerea

Evolvuls alsinoides

Ficus bengalensis

Ficus religiosa

Hemidesmus indicus

Hybanthus enneaspermus

Madhuca longifolia

Mangifera indica

Moringa concanensis

Musa paradisiaca

Neolamarckia cadamba

Ocimum tenuiflorum

Oldenlandia corymbosa

Piper nigrum

Piper nigrum

Solanum trilobatum

Terminalia chebula

Terminalia chebula

Zingiber officinale

Zingiber officinale

Grass pitching- Including arranging the plants as per planting plan.Maintenance (including replacement of mortalities) up to project completion period.

Pennisetum setaceum

Saccarrum spontaneum

Vetiver zizanioides

Developing and implementing the QR code scanning in the herbal garden to access detailed information about each plant, including its name, scientific classification and uses.QR code shall be for each plant /tree based on section and row shall explain how much tree and plants available in this area.The QR code shall be with a) Botanical name (Name of plant in Tamil, English, Hindi,Malayalam and Telugu) b) Details about species, family, habit, distribution part used medicinal uses propogation c) Facilities for visitors to share their experience in the garden and feed back through mobile, sharing the species details through whatsapp, facebook etc.The other specification are as follows,

Application platform 1. Mobile Application -for visitors to scan QR codes and access plant information a.Ios b.Android 2. Web application-to manage the plant date and any feedback from visitors

Technical stack: 1. Fllutter (Google frame works)- For mobile application 2.PHP-Backend 3. Mysql-Database 4.Angular 16-web application 5.Application can manage 10K concurrent users

Server requirement: 1. Linux server with Ubuntu (on premise or any public cloud services) 2.16 GB Ram 3.320 GB SSD 4.8 VCPUS

Security : 1.Server Firewall enabled 2.Token based authentication with JWT 3.Storing of id based on UUID 4. SSL Enabled for save data transmission

The rate to be quoted for the following

Web application(Angular and PHP)

Mobile application ( ios and Android )

Server maintenance

Application maintenance

QR code( 4 X6 inches)

QR code stand (2.25 feet)

QR code in details display (12 x 6 inch)

Installation charges

Providing plant information and verification

Sub Total

Added GST of 18%

SAI HRIDHAM INFRAA PRIVATE LIMITED (BID ID -1098726)