ADDN ALTN TO DSS COMPLEX BUILDING P 763 AT AF STN SURATGARH

Amount

BOQ (ADDN/ALTN TO DSS COMPLEX BUILDING (P-763) AT AF STN SURATGARH)

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any type of mortar, complete all as specified and directed.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7mm to 8mm thick, (square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm (including size 400mmx400mm), as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM 1:6, complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including screed bed or bedding layer of 15mm thick in CM 1:6, complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm thick ( Square/rectangular) polished area of each tiles not exc 0.36 sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

S&F for glazed ceramic tiles size 350mmx250mmx7mm /450mmx350mmx7mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments, complete all as specified and directed.

M&L for 25mm thick Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

Dismantling brick tiles or terracing tiles single layer on roofs, complete all as specified and directed.

Dismantling mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part there of), complete all as specified and directed.

M&L for wire brushing neat cement slurry with 3kg of cement per sqm at top and bottom of base coat and cleaning top surface, complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 (20mm graded stone aggregate) in kerbs of mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) padding average to be provided in slope, complete all as specified and directed.

M&L for 10mm thick rendering plaster on roof for laying in CM 1:4 waterproofing treatment with using WPC, complete all as specified and directed. Note:- WPC will be measured and paid separately as supply only.

Supply only integral waterproofing compound, complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning over primed surface complete all as specified and as directed by Engr in Charge.

M&L 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight of cement on mud phuska, complete all as specified and directed.

All as per ser item No 19.00 here in before but except tiles, complete all as specified and directed.

M&L flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3, complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

Post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr / hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre snd sealing the same complete all as specified and directed by Engr-In-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for rendering 10mm thick plaster on brick or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement on internal surfaces of wall, complete all as specified and directed.

M&L for rendering 15mm thick on concrete or brick masonry surfaces or surface other than fair face of brickwork in cement mortar 1:4 as in external surfaces of wall, complete all as specified and directed.

M&L for rough cast plaster, over 10mm thick plaster in CM 1:6, complete all as specified and directed by Engr in charge.

M&L for rendering 5mm thick in cement mortar 1:3 on surfaces of ceiling and finishing the surface even and smooth without using extra, cement all as specified abd directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of 1.5mm-2mm thick wall putty over a coat of primer, complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment) over a coat of primer, in camouflaging patterns , including preparation of new surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over a coat of 1.5mm-2mm wall putty surfaces of walls and ceiling, complete all as specified and directed.

Taking down door chowkhat or frame including shutter area not exc 1.50 sqm each and removing to store, complete all as specified and directed.

Taking down door chowkhat or frame including shutter area exc 1.50 sqm and not exc 4.00 sqm, complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening, complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site, complete all as specified and directed.

S&F for mild steel butt hinges minimum weight 100mm size. mild steel cold rolled, complete all as specified and directed.

S&F for aluminium handle, cast type, anodiesed of size 150mm & fix to shutter, complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm, complete all as specified and directed.

S&F for floor door stopper of aluminium 150mm size, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection flooring, complete all as specified and directed.

Dismantling of water tanks and removing to store capacity of tank exc 501 and not exc 1000 ltr, complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore to walls, ceiling etc, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore to walls, ceiling etc, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

S&F for medium grade GI tubing 15mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

S&F for medium grade GI tubing 20mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

S&F in repairs 15mm bore pipe gun metal globe or gate valves with iron wheel head screwed both end for iron pipe, complete all as specified and directed.

S&F in repairs 20mm bore pipe gun metal globe or gate valves with iron wheel head screwed both end for iron pipe, complete all as specified and directed.

S&F in repairs 15 mm bore stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union, complete all as specified and directed.

S&F in repairs 15mm bore pipe bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs towel rail 600mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats, complete all as specified and directed.

M&L for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures, complete all as specified and directed.

S&F for 2 levers brass mortice lock vertical type, size 100mm including escutcheon plates and two keys, complete all as specified and directed.

Dismantling of wall ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F for designer Gypsum ceiling board of size 595mm x 595mm x 12mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600mm, GI T-section of size 25mm x 25mm x 1.25mm, GI L-section 25mm x 25mm x 1.25mm, hanging arrangements with roof with GI wire not less than 2.00mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mmx3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let, complete all as specified and directed.

S&F for PVC (SWR) multi floor trap with grating including jointing with solvent cement 100mm dia out let, complete all as specified and directed.

S&F for PVC (SWR) pipes of 110mm dia, single socketed fixed to walls, complete all as specified and directed.

S&F for PVC (SWR) pipes of 75mm dia, single socket fixed to walls, complete all as specified and directed.

S&F for 100mm bore of pipe stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F for PVC (SWR) bends of 110 mm dia, any radius, complete all as specified and directed.

S&F for PVC (SWR) vent cowl, 100 mm dia, complete all as specified and directed.

M&L for brick work with subclass B bricks, straight curved on plan exc 6 m mean radius in cement mortar 1:6, complete all as specified and as directed.

M&L for half brick works with sub class B bricks straight or curved on plan mean in any radius built in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) in surface channels and drains etc, complete all as specified and directed.

Demolition of cement concrete bed in haunching and breaking up RCC drain pipes set in cement mortar of 150mm dia, complete all as specified and directed.

M&L for reinforced concrete NP2 drain pipes 150mm dia pipes confirming to IS laid in trenches and jointed in CM 1:2, complete all as specified and directed.

M&L for cutting in to existing manhole for connectiing new drain 150mm bore , making good to pipe & renderring cutting out existing benching for & forming branch channel in PCC 1:2:4 type B1 smooth finished & reforming benching as requierd, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in benching and surface channel of manholes, complete all as specified and directed.

M&L for PCC 1:3:6 type B1 (using 20mm graded stone aggregate) as in coping including form work etc, complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ( sliding two or three track / openable), ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, handle ,lock, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.complete all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701mm to 850mm in width & of weight between 36Kg to 60 kg, complete all as specified and directed.

S&F for aluminium chequered grills as on aluminium windows, weight not exc .0.50 kg/sqm and fixed including taking down of old unservicable grill, complete all as specified and directed by the Engineer in charge.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F for mild steel plates, plain or chequered, in 5mm thick or over in thickness in available sizes, Fe 410-W (Gde E-250) quality, complete all as specified and directed.

S&F for steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st-240, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel ordinary tint over coat of red oxide primer of any description exc 10 cm girth, not otherwise described, complete all as specified and directed

Surface excavation not exc 30cm deep and averaging 15cm deep in soft/loose soil and getting out, complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

M&L for PCC 100mm thick, 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base under floor, complete all as specified and directed.

M&L for forming embankments including raising (or lowering) earth, spreading in layers not exc. 30cm thick;watering, well ramming and finishing to required size, shape,etc., not exc. 1.5 m high from base, complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface in broken stones or boulders, complete all as specified and directed.

M&L for two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all specified and directed.

M&L for machine cut kota stone slab 18mm to 20mm thick as in flooring / stair case landing, laid over & including 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing, complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mmx460mm with bowl size 410mmx330mmx160mm, complete all as specified and directed.

S & F in repairs; stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters, complete all as specified and directed.

Demolition on reinforced cement concrete of any description and in any position not otherwise specficially provided, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out in soft / loose soil, complete all as specified and directed.

M&L for RCC design mix M-25 (using 20mm graded stone aggregates) in columns, pillars, posts & struts, complete all as specified and directed. Note:-reinforcement to be measured separately.

M&L for RCC design mix M-25 (using 20mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete, complete all as specified and directed. Note:-reinforcement to be measured separately.

M&L for RCC Design mix M25 (with 20mm graded stone aggregates) in beams, cantilevers,bressummers, lintel over 1.5 m span, complete all as specified and directed. Note:-reinforcement to be measured separately.

M&L for RCC Design mix M25 (with 20mm graded stone aggregates) in slabs supported on walls, beams, and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note:-reinforcement to be measured separately.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete, complete all as specified and directed.

Use and waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exceeding 200mm thick (horizontal or slopping) for rough finished surface of concrete, complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.for rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork for square or rectangular sides of pillars, posts, struts, piers, columns and stanchions etc.for rough finished surfaces of concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

S&F for mild steel TMT reinforcement bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinforcement, complete all as specified and directed.

S&F for mild steel TMT reinforcement bars 8mm dia and over cut to length and bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surfaces in CM 1:6, finished even and smooth surface wihtout using extra cement, complete all as specified and directed.

M&L for 15mm thick cement plaster using WPC in CM 1:4 to brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed. Note:- WPC shall be measured separetly.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in coping including weathering slightly rounded or chamfered angles grouted, complete all as specified and directed.

M&L for returning, filling in, including spreading , levelling,watering and well ramming of approved earth of soft/loose soil in layers not exc 15cm thick each, complete all as specified and directed.

M&L for removal of surplus spoil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.

Excavating over areas exc 1.5m deep and not exc 3m deep getting out in soft/loose soil, complete all as specified and directed.

Excavating over areas exc 3 deep and not exc 4.5m deep getting out in soft/loose soil, complete all as specified and directed.

M& L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in 1:4, complete all as specified and directed.

M&L hardcore of broken bricks in Loose filling with aggregates of gauge 80 to 150mm in soakage pits, soakage wells, complete all as specified and directed.

M&L for M-25 RCC beams, cantilevers, slab ,bressummers, lintels over 1.5m span in 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed.

Use and waste of Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similarwork exc 5cm but not exc 10cm, complete all as specified and directed.

M&L for 150mm internal bore dia Double wall corrugated PE pipes laid in trenches and jointed and testing complete with all necessary hardware, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe line complete all as specified and directed by EIC. Note : NP2/DCW pipe will be measured and paid seperetely.

M&L for RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4, complete all as specified and direceted.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type, complete all as specified and direceted.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store(Accessories or components to be provided free for replacment by department), complete all as specified and direceted.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and direceted.

Taking down unserviceable DB's box including MCB's of any size/rating, complete all as specified and direceted.

Material and labour for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 20 mm dia as per site requirement for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable with flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulator etc with white or any colour cover plate with and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 Sqmm as an earth wire connected to common earth and earth dolly as per IS specification & as specified for one light /fan /buzzer/socket point controlled by one modular switch. (a) One light point/ceiling fan/exhaust fan controlled by one switch. Note: Metal flush box and other modular accessories except switches, sockets, and fan regulators shall be deemed included in the rate quoted.

All as per Srl item No 125 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and direceted.

All as per Srl item No 125 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 125 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLS cable connected to earth dolly, complete all as specified and direceted.

All as per Srl item No 125 here-in-before but for one power point (for AC/Geyser) out let with 4.0 Sqmm stranded copper conductor FRLS cable PVC insulated including earth wire 4.0 Sq mm copper conductor FRLS cable connected to earth dolly, complete all as specified and direceted.

Point wiring with 2.5 Sqmm (Nominal area) in stove enamelled steel conduit insulated unsheathed multistranded copper copper conductor cable in and including stove enamelled steel conduit 20 mm dia medium grade ISI marked including fittings and accessories with continous stove enamelled steel conduit insulated copper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including (enamelled steel conduit box of suitable size with laminated sheet cover of 3 mm thick for mounting switches, socket, regulator) complete.

One light point controlled by one switch 16A, complete all as specified and direceted.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and direceted.

Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and direceted.

S&F for modular switch one way 6 Amps one module, complete all as specified and direceted.

S&F for modular socket 6 and 16 Amps 3 & 6 Pin combined 02 module, complete all as specified and direceted.

S&F for modular socket 6 Amps 5 Pin combined 02 module, complete all as specified and direceted.

S&F for modular switch one way 16 Amps, one module, complete all as specified and direceted.

S&F for modular switch Bell push, flush type one module, complete all as specified and direceted.

S&F of ceiling rose, surface type, 65mmx50mm, 3 terminal, complete all as specified and direceted.

S&F for door bell ding dong, AC, 230 Volts, single pole, complete all as specified and direceted.

S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting, complete all as specified and direceted.

S&F of LED bulb 09 watt, complete all as specified and directed. Make - Crompton cat part No LED 9W - B22/E27 - CDL / WW or equivalent to Polycab/Havells.

S&F for LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose, complete all as specified and direceted.

S&F for LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and direceted.

S&F LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable, complete all as specified and direceted.

S&F Heavy Duty 24V DC (10amp Power) Hooter, Industrial Siren | Emergency Alarm, Loud Hooter Sound Range Upto 1.5KM (No Inbuilt Battery Backup) complete all as specified and directed by Engr-in-Charge. .

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard as it is in working condition for further hanging in its original position or any other position including as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr- in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

S&F for exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and direceted.

S&F for exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers, complete all as specified and as directed .

S&F for ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor, complete all as specified and direceted.

S&F for Modular Fan step regulator 02 Module, 120W 230 volts, 50 HZ, AC. Supply, complete all as specified and direceted.

Taking down exhaust fans of any sweep and any size including cable connections and removing the exhaust fan with blades deposit to store yard as it is in working condition for further fixing in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service i.e. cleaning, greasing and oiling, painting of exhaust fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed . Note :- Any damage has to be made good by the contractor to make the item functional after testing.

S&F for Wall fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers, complete all as specified and direceted.

Taking down window type Air conditioner after disconnecting inner unit of capacity 1.5/2 ton and refixing same after work , fixing with all required accessories including charging of refrigerent upto desired pressure , copper coil extra, complete all as specified and direceted.

M&L for submain wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed. Note- (a) The two runs of single core cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and direceted.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail, complete all as specified and direceted.

S&F of MCB SP, 6-32A,10KA complete all as specified and as directed . Make : Legrand cat part No. : 4085 87-95 or equivalent in ABB/Schneider.

S&F of MCB SPN, 63A ,10KA complete all as specified and as directed . Make : Legrand cat part No. : 4086 17 or equivalent in ABB/Schneider.

S&F for Vertical MCB DB TPN 6 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V including provision for mounting MCCB upto 125 Amps rating complete all as specified and direceted.

S&F for 4 Pole MCCB 125 Amps 50 Hz 415 V with rupturing capacity 16 KA with thermal setting of 80 to 100%, complete all as specified and direceted.

S&F for LED luminaire 600mmx600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible conductor cases of suitable size, complete all as specified and direceted.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

S&F for LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withP 65/66 protection, complete all as specified and direceted.

M&L for cutting openning through brick wall 230mm thick built in cement motar suitable for exhaust fan 300mm seep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and direceted.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17(R) of tender documents.

M/S Shree Ram Enterprises

Bhawani Enterprises

SRI SAI CONSTRUCTION COMPANY

H S BUILDERS

M/S VISHNU ENTERPRISES

M/s JUGAL KISHORE MISHRA AND SONS