RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Light Emitting Diode LED Fixture- LED Tube Light ( 320 pieces ) Technical Specifications 1/5 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen Colour Temperature (K) 6500 6500 Warranty for free replacement (Years) 5 Years 5 Years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Glass Glass LED Fixture With Al back
Requiredfront with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make - * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light Yes * 2/5 should alight for more than 15 min after the test Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0
Required25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date - * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report - * Compulsory Registration and CRS of BIS for safety to IS 10322 Pt 5 Sec 1 2012 Yes * EMC Test Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
