Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹58,551
Closing Date
6 Aug 2026, 5:00 pm
General Manager(Mech.),E and M, OCC Ltd.,
office of General Manager(Mech.),E and M, OCC Ltd., Rasulgarh, Bhubaneswar.
Repair Overhauling replacement by supply, fabrication transportation erection with painting and testing of 10 Nos spillway radial gates of size 12.190 mtr x 12.190 mtr with hoisting arrangements and repair to cracks of piers of the Balimela Dam
2026_OCCL_136804_1
E-Procurement Notice No. 11 /OCCL /2026-27 (on-line)
Open Tender
Mechanical Works
Item Rate
180 days
Balimela Dam
Please refer tender documents
3 documents required · 3 mandatory
₹11,800
₹58,551
23 Jul 2026
23 Jul 2026
7 Aug 2026
23 Jul 2026
6 Aug 2026
23 Jul 2026
23 Jul 2026 - 31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1RADIAL GATES-(Size 12.190 Mtr. x 12.190 Mtr.) | |||||
| 1.01 | Overhauling of trunnion assembly by greasing trunnion pins by grease guns , labour,including hire charges of machinery, equipments, tools & tackles oxygen, DA etc and as per direction of Engineer-in-charge.. | - | SETS | 100 | - |
| 1.02 | Replacement by dismantling pressure plates,m.s. flat etc. & removing old and damaged Rubber seals (including fabrication and machining) of Radial gate with fitting of new Rubber seals to be supplied by Corporation including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge.Materials will be supplied by job worker. | - | SETS | 100 | - |
| 1.03 | Repair of Guide rollers of Radial Gate by dismantling, overhauling & replacement of damaged parts & new bronze bush,structural steel for guide roller, ss of guide roller pin and guide roller bracket supplied by job worker including machining , greasing , labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge | - | NOS. | 100 | - |
| 1.04 | Painting of upstream & downstream side of 10 Nos. of radial gate including skin plate, horizontal girder, end arm, trunnion assembly after surface preparation by blast cleaning process, performed with sand as per requirements and class 'A' of IS : 14177:1994. After blast cleaning, the surface should be cleaned from loose dust and debris preferably by air blast with help of blower. Over the prepared surfaces two coats of zinc rich primer should be applied to give a total dry film thickness of 70 ± 5 microns followed by two coats of solvent less coal tar epoxy paint applied at an interval of 24 hours. Each coat should give a minimum dry film thickness of 150±5 microns. The total dry film thickness of all the coats including primer coating should not less than 350 ±5 microns as per IS: 14177:1994 including sand, labours, machinery, equipments, scaffolding etc, but excluding paints, primer, thinner to be supplied by OCCL. | - | SQM. | 100 | - |
| 1.05 | .Replacement by dismantling, removing old & damaged Turn buckles of Radial Gate with fitting new ones (to be supplied by Corporation) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge | - | SETS | 100 | - |
| 1.06 | Replacement by dismantling, removing old and damaged Socketted wire rope assemblies of Radial Gate with fitting of new ones to be supplied by Corporation and equalising with turnbuckles including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge. Cardium compund will be supplied by Job Worker. | - | NOS. | 100 | - |
| 1.07 | Repair of worm reducers of Radial Gate by dismantling, overhauling & replacement of damaged parts( to be supplied by Corporation) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge | - | NOS. | 100 | - |
| 1.08 | Replacement of old position indicator with new one (new position indicator shall be supplied by OCCL.) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge | - | NOS. | 100 | - |
| 1.09 | Greasing all gear, pinion, rope drum, bearing& housing, gear oil topping in worm reducer, application of cardium compound on socketted wire ropes, alignment of worm reducers, alignment of lineshafts including labour, hire charge of machinery, equipments including supply of bearing grease, cadmium compound, labour, hire charge of machinery, equipments, tools & tackles oxygen, DA etc and as per direction ofEngineer-in-charge | - | SETS | 100 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_602924.xls
BOQ • 0.24 MB
11.pdf
Tender Documents • 1.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].