Loading
Loading…
Loading…
Tender Value
₹5.8 Cr
EMD Value
₹11.7 L
Closing Date
18 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR.DEN/S
15 conditions · 2 needing a document upload
10.2. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
10. Eligibility Criteria: 10.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows:The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- "Any Type of civil work viz. building up to G+4 and structures work, pipe lines, underground and overhead tanks, foundation treatment works in any Railway embankment/cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works."
14 conditions · 3 needing a document upload
Standard format of certificate to be submitted by the bidder is enclosed in document TENDER FORM (First Sheet) as Annexure-I. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The work shall be maintained after completion for a period of 24Months by the contractor and he shall make good any defects, imperfection shrinkages or faults which may appear at his own cost.
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be only exempted from payment of Bid Security. Labor Cooperative Societies shall submit only 50% of above Bid Security.
Tenderers are abiding by the General Conditions of Contract (GCC) April-2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Tenderers are requested to visit the web site https//www.ireps.gov.in frequently till the closing date and time for any update.
Tenderer should have to upload only exact & specific, clear and readable documents, irrelevant documents should not be uploaded, and documents uploaded once should not be repeated
1.Construction of new PWI office depot with store facilities at GUR under ADEN/KLBG sub-division. 2-Construction of PWI office and store & IOW office with store at Wadi under ADEN/KLBG sub-division. 3-Building work for construction of minor TRD depot at wadi station under ADEN/KLBG
15-2026-SrDENS
15-2026-SrDENS
Open
Works - General
12 Months
Solapur, Maharashtra
₹0
₹11.7 L
18 May 2026
25 Apr 2026
4 May 2026
378 items across 4 schedules · ₹7,65,89,438.6 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 1500 | 177.5 | 2,66,250 |
| 2 | Ordinary rock | cum | 1000 | 498.9 | 4,98,900 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 300 | 196 | 58,800 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 150 | 7,878.5 | 11,81,775 |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 100 | 495.75 | 49,575 |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 100 | 18.15 | 1,815 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 300 | 392.15 | 1,17,645 |
| 8 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 200 | 842.5 | 1,68,500 |
| 9 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 200 | 927.25 | 1,85,450 |
| 10 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 150 | 736.4 | 1,10,460 |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 250 | 961.3 | 2,40,325 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 25000 | 107.85 | 26,96,250 |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 30000 | 107.85 | 32,35,500 |
| 14 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 180 | 9,504.75 | 17,10,855 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 220 | 9,860.4 | 21,69,288 |
| 16 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 100 | 733.5 | 73,350 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 120 | 7,370.65 | 8,84,478 |
| 18 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 250 | 9,344.35 | 23,36,087.5 |
| 19 | Area of slab upto 0.50 sqm | Sqm | 50 | 5,413.5 | 2,70,675 |
| 20 | Area of slab over 0.50 sqm | Sqm | 30 | 5,136.3 | 1,54,089 |
| 21 | Granite work | Metre | 100 | 510.95 | 51,095 |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 70 | 1,267.95 | 88,756.5 |
| 23 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 40 | 3,167.95 | 1,26,718 |
| 24 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 20 | 462.35 | 9,247 |
| 25 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 500 | 238.35 | 1,19,175 |
| 26 | 125x64x2.50 mm | Each | 60 | 129.85 | 7,791 |
| 27 | 250x16x5 mm | Each | 20 | 308 | 6,160 |
| 28 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 2 | 998.35 | 1,996.7 |
| 29 | 300x16 mm | Each | 20 | 303.25 | 6,065 |
| 30 | 200x10 mm | Each | 20 | 99.7 | 1,994 |
| 31 | 100 mm | Each | 20 | 59.55 | 1,191 |
| 32 | Single rubber stopper | Each | 6 | 39.6 | 237.6 |
| 33 | Twin rubber stopper | Each | 6 | 72.35 | 434.1 |
| 34 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 20 | 570.95 | 11,419 |
| 35 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 15 | 3,720.75 | 55,811.25 |
| 36 | Using R3 series with frame (55mm & above) x (45mm & above) & sash (55mm & above) x (65mm & above) & French (False) mullion (55mm & above) x (60mm & above). (Height upto 1.8 meter). | Sqm | 50 | 11,466.8 | 5,73,340 |
| 37 | 125 mm | Each | 20 | 119.2 | 2,384 |
| 38 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 10000 | 133.7 | 13,37,000 |
| 39 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 15 | 5,804.35 | 87,065.25 |
| 40 | Hot finished welded type tubes | Kg | 5000 | 194.4 | 9,72,000 |
| 41 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 1000 | 123.6 | 1,23,600 |
| 42 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 500 | 172.6 | 86,300 |
| 43 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | Sqm | 25 | 844.7 | 21,117.5 |
| 44 | Dark shade pigment using ordinary cement | Sqm | 50 | 1,119.5 | 55,975 |
| 45 | 25 mm thick | Sqm | 100 | 1,948.25 | 1,94,825 |
| 46 | Size of Tile 600 x 1200 mm | Sqm | 40 | 1,798.8 | 71,952 |
| 47 | Size of Tile 600 x 600 mm | Sqm | 80 | 1,464.85 | 1,17,188 |
| 48 | 75 mm diameter | Metre | 70 | 248.8 | 17,416 |
| 49 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 50 | 75 mm | Each | 10 | 91.7 | 917 |
| 51 | 110 mm | Each | 10 | 136.15 | 1,361.5 |
| 52 | 75x75x75 mm | Each | 2 | 144.3 | 288.6 |
| 53 | 110x110x110 mm | Each | 4 | 221.35 | 885.4 |
| 54 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 50 | 1,355.8 | 67,790 |
| 55 | 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified | Sqm | 40 | 1,401.35 | 56,054 |
| 56 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 600 | 738.65 | 4,43,190 |
| 57 | Ridges plain (500 - 600mm) | Metre | 50 | 532.35 | 26,617.5 |
| 58 | 1:4 (1 cement: 4 coarse sand) | Sqm | 1500 | 357.35 | 5,36,025 |
| 59 | Neat cement punning. | Sqm | 150 | 79.95 | 11,992.5 |
| 60 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 200 | 262.7 | 52,540 |
| 61 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 200 | 185.65 | 37,130 |
| 62 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2000 | 193.7 | 3,87,400 |
| 63 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 25 | 176.25 | 4,406.25 |
| 64 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 350 | 170.7 | 59,745 |
| 65 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 150 | 263.95 | 39,592.5 |
| 66 | 90 mm to 45 mm size stone aggregate | cum | 70 | 2,098.4 | 1,46,888 |
| 67 | Moorum | cum | 990 | 768.25 | 7,60,567.5 |
| 68 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 30 | 1,046.95 | 31,408.5 |
| 69 | Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). | Kg | 1000 | 78.95 | 78,950 |
| 70 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 50 | 972 | 48,600 |
| 71 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 6,767.4 | 13,534.8 |
| 72 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,515.55 | 13,031.1 |
| 73 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 2 | 6,258.75 | 12,517.5 |
| 74 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 3 | 2,226.35 | 6,679.05 |
| 75 | 610x510 mm bowl depth 200 mm | Each | 1 | 4,940.8 | 4,940.8 |
| 76 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 2 | 349.15 | 698.3 |
| 77 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 4 | 1,034.8 | 4,139.2 |
| 78 | 32 mm dia | Each | 5 | 119.55 | 597.75 |
| 79 | Rectangular shape 1500x450 mm | Each | 3 | 2,093 | 6,279 |
| 80 | C.P. brass | Each | 2 | 803.7 | 1,607.4 |
| 81 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 3 | 168.35 | 505.05 |
| 82 | 15 mm nominal dia Pipes | Metre | 30 | 244.7 | 7,341 |
| 83 | 20 mm nominal dia Pipes | Metre | 25 | 274.3 | 6,857.5 |
| 84 | 25 mm nominal dia Pipes | Metre | 25 | 355.4 | 8,885 |
| 85 | 50 mm nominal dia Pipes | Metre | 25 | 794.25 | 19,856.25 |
| 86 | 25 mm nominal bore | Each | 3 | 622.4 | 1,867.2 |
| 87 | 50 mm nominal bore | Each | 2 | 1,026.65 | 2,053.3 |
| 88 | 15 mm nominal bore | Each | 25 | 406.85 | 10,171.25 |
| 89 | 20 mm nominal bore | Each | 20 | 462.5 | 9,250 |
| 90 | 25 mm nominal bore | Each | 2 | 464.05 | 928.1 |
| 91 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 2000 | 11 | 22,000 |
| 92 | 15 mm nominal bore | Each | 4 | 798.95 | 3,195.8 |
| 93 | 15 mm nominal bore | Each | 2 | 670.45 | 1,340.9 |
| 94 | 15mm nominal bore | Each | 2 | 574.3 | 1,148.6 |
| 95 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 2 | 125.6 | 251.2 |
| 96 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 2 | 118.5 | 237 |
| 97 | 20 mm nominal bore, 89 mm long, weighing not less than 88 gms | Each | 2 | 129.9 | 259.8 |
| 98 | 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Each | 2 | 224.1 | 448.2 |
| 99 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 100 | 530.9 | 53,090 |
| 100 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 100 | 634.45 | 63,445 |
| 101 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 15 | 1,176.8 | 17,652 |
| 102 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. | Sqm | 600 | 688.9 | 4,13,340 |
| Schedule total | ₹2,40,77,688.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
GCC-2022-uptoACS10.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
GSTcounsilletterof05july.pdf
ATTACHMENT
PCEcircular207QualityofworkSiterecord.pdf
ATTACHMENT
PCEcir208ConcreteMixDesign.pdf
ATTACHMENT
AddlSplconditions.pdf
ATTACHMENT
Specialconditionscivilwork.pdf
ATTACHMENT
Comprehisnsiveprocedureorderforworksitesafety_compressed.pdf Safety rules at work site
ATTACHMENT
Comprehisnsiveprocedureorderforworksitesafety_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .