Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-Finance | ₹1.9 L | L1 | Accepted-Finance L1 |
| 2 | L2₹2.4 LAccepted-Finance | ₹2.4 L | L2 | Accepted-Finance L2 |
| 3 | L3₹2.7 LAccepted-Finance | ₹2.7 L | L3 | Accepted-Finance L3 |
Tender Value
₹3 L
EMD Value
₹6,000
Closing Date
10 Apr 2026, 6:00 pmClosed
Executive Enigneer
PWD Division Udhampur
(Part A) MINOR REPAIR/ RENOVATION OF GHS Johnu. (Part B ) MINOR REPAIR / RENOVATION OF HS Dhandal. (Part C) MINOR REPAIR / RENOVATION OF MS Mora Gujjaran
2026_PWDJK_307270_1
e-NIT No. 01 of 2026-27 Dated 03.04.2026
Open Tender
Civil Works
30 days
Udhampur
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD Division Udhampur
₹6,000
24 Apr 2026
3 Apr 2026
11 Apr 2026
4 Apr 2026
10 Apr 2026
4 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1(Part A) MINOR REPAIR / RENOVATION OF GHS Johnu | |||||
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm | 31.22 | sqm | - | - |
| 3 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 3.48 | sqm | - | - |
| 4Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded | |||||
| 5Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces | |||||
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work | 4 | SQM | 131.85 | ₹527.4 |
| 7 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. | 110.03 | sqm | - | - |
| 8 | Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar. | 1.18 | cum | - | - |
| 9 | Electric wiring with 1.5 sqm copper cable including 20 mm dia 2 mm thick wire sunken box and connection to be main polecomplete as direction by engineer -charge | 7 | point | 1,015 | ₹7,105 |
| 10 | 12 mm cement plaster on wall of mix 1:6 ( 1 cement 6 coarse sand ) | 8 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
BOQ_996979.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
