Construction of Commercial Complex work at Atal Parisar Behind Fire Briged Campus in ward no 19 zone 2 UMC

Amount

Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS : 12894, in super structure above plinth and upto floor two level. having 100 kg/cm" average compressive strength Cement mortar 1 : 4 (1 cement : 4 sand)

Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. 75 mm diameter (minimum wall thickness 3.2mm)

Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. 110 mm diameter (minimum wall thickness 3.2mm)

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. coupler 75 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. bend 87.50 75 mm

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. bend 87.50 110 mm

Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 110 mm

Providing and fixing uPVC trap of self cleaning design complet. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet

Providing & fixing chicken mesh as per ISI specification and in the required with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

PROVIDING AND FIXING GUN METAL GATE VALVE WITH BRASS LEVER HANDLE OF APPROVED QUALITY. 25 MM NOMINAL BORE

PROVIDING AND FIXING GUN METAL GATE VALVE WITH BRASS LEVER HANDLE OF APPROVED QUALITY. 40 MM NOMINAL BORE

PROVIDING AND FIXING GUN METAL GATE VALVE WITH BRASS LEVER HANDLE OF APPROVED QUALITY. 50 MM NOMINAL BORE

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Making of water recharging pit including construction of 600x600x1000mm deep (wall and base 100mm th.) RCC pit with 100mm th. perforated pre-cast RCC cover and Boringholes at the base of the chamber with auger for under reamed piles of 250mm dia.up to a depth of 3.60 m below ground level and below sub soil water level and soil including fixing of PVC perforated pipe casing of full depth and filling with stne aggrigate filter media complete as per detail.

Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq.mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for on separate board medium point.

SUPPLYING AND FIXING PVC CONDUIT ISI MARKED ALONG WITH THE ACCESSORIES IN CONCEALED SYSTEM INCLUDING PAINTING ETC. AS Required PVC Condult 25 mm (HMS)

Supplying and fixing street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 3KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP65 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. 24w/25w

Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Supply, Installation testing and commissioning RJ - 45 Computer Jack cat 6 with shutter Modular (1Module)

Suppling and drawing 4 pair shielded, 0.5 mm PVC.Insulated copper conductor un-armoured Cat-6 computer cable FR in existing surface / concealed ,steel / PVC. Conduit/Casing-NCapping as required.

Supply, installation, testing and Commissioning of Diesel Generating Set with AMF Control Panel single/three phase as Per CPWD specification and CPCB-II Norms. Supply Installation, testing & Commissioning of Diesel Generating Set Three phase, water cooled with AMF control panel. 30 KVA 415V.

Supplying Instulation, testing & commssioning of out door type LT Distribution box fabricated from 16 SWG CRCAMS sheet out door type with 200 A TPN MCCB as incommer, busbars 3 Nos. 100A TPN MCCB on out going side of the transformer.

Supplying Instulation, testing & commssioning of out door type switching unit fabricated from 16 SWG CRCA MS Sheet. The unit shall be dust & vermin proof. The unit shall be provided with the following. 1 No. 32 A TPN MCB as incommer, 1 No. 32 A TP control contactor, 1 No. 0-24 Hrs. Timer, 4 No. 16 A SP MCB.

PROVISION FOR LIFT WORK AS PER DIRECTION OF ENGINEER IN CHARGE

PROVISION FOR FIRE FIGHTING WORK AS PER DIRECTION OF ENGINEER IN CHARGE

Bidder Name

Amount

ENGINEER SANJAY BAGDI(GSTN-23AHCPB6349L1ZF)

DAYAL INFRATECH PRIVATE LIMITED(GSTN-23AAECD8398R1ZR)

ENGINEER SANJAY BAGDI

DAYAL INFRATECH PRIVATE LIMITED