RENOVATION OF HOUSE NO.237 (JUDGE HOUSE) SECTOR 16 CHANDIGARH

Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge.

Providing and laying double charge vitrified floor tiles of size 600 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material.

Providing and laying antiskid vitrified floor tiles of size 600 x 1200 mm (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 2mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Antiskid vitrified tile of size 600x1200 mm.

Providing and fixing Ist quality glazed vitrified wall tiles of size 600x1200 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with Classic grey tile adhesive @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 600 x 1200 mm.

Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour Black, Cherry/ Ruby Red (Based on DSR 8.2.2.1)

Providing & fixing P.O.P. false ceiling at all heights including poroviding & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sq, (both side inclusive) as per IS 277 and consisting of angle cleat of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm clc, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers or 25 x 10 x 0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c'c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mn each having lips of 10.5mm, at 450mm clc, shall be fixed in a direction perpendicular to G.I ntermediate channel with connecting cip made out of 2.64mm dia x 230mm long G.I wire at every junction, including perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws 230mm interval, including laying of P.O.P. ceiling of average thickness 12 to 14mm reinforced with chicken mesh with ceiling sections including the cost of making opening for light fittings/concealed lighting, sound speakers, making suspended acoustical clouds, space for Curtains/ blinds, grills, diffusers, cut outs made with frame of perimeter channels etc suitably fixed by giving required offsets, excluding the cost of painting all complete as per and direction of the Engineer in charge.

Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and fixing modular kitchen with cabinet made out of 18 mm thick HDHMR board machine made. The HDHMR board of 8 feet by 4 feet should weight not less than 46kg. The edges of cabinet is to be fixed with PVC edge bend of 0.8mm thick with adhesive (hot melt). The complete box shall be assembled with mini fix Handleless Profiles of should be machine fitted (Built-in) into the cabinets. It further includes the cost of 4 nos legs 4" high with load capacity of 200kg per leg). The cost also includes PVC skirting 12mm thick in front of cabinet bottom. This cost also includes the front shutter made out of 18mm thick HDHMR exterior grade board with both side PU Painted. The shutter should have 4 side PVC edge bend 2mm thick fixed with adhesive (hot melt). All these should be complete as per drawings available in the office of concern SDE.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stair case railing of size 4" x 4" of teak wood complete fixed in the existing M.S. railing including making the groove in railing at bottom, top sides rounded with smooth finish completely fixed in position in all respect to the entire satisfaction of Engineer-in-charge.