PROVISION OF STORE FOR P-73 AT AFAC COIMBATORE

Amount

Material & Labour for 100mm thick broken stone or boulder,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

Material & Labour for cement concrete Type B2 1:4:8 (40mm graded aggregates) in foundations, filling and mass, complete all as specified.

Material & Labour for nominal mix reinforced cement concrete type B1 1:2:4 ( 20mm graded stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material & Labour for Formwork to flat surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Material & Labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Material & Labour for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Material & Labour for mild steel 16 mm dia 250mm long foundation boults, L shape grage EN-8 finished with zinc plated, hot dip galvenazed (HDG) etc, complete all as specified and directed.

Material & Labour for plates Fe 410-W (Gde?E- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment, complete all as specified.

Material & Labour for 18mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm long, complete all as specified and directed.

Material & Labour for Rolled mild steel sections Fe 410-W (Gde?E- 250) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

Material & Labour for Rolled mild steel sections Fe 410-W (Gde?E- 250) quality A as in Roof trusses (framed),trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

Material & Labour for 50 mm thick ready made sandwich concrete panels, made of FRACC (fibre reinforced aerated concrete core) sandwich with 5mm asserts fibre board, jointed with tongue and groove joints, size as per site requirements fixed as specified and directed.

Material & Labour for Rolled mild steel sections Fe 410-W (Gde?E- 250) quality A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complet, complete all as specified.

Material & Labour for Rolled sections Fe 410-W (Gde?E- 250) quality A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified.

Material & Labour for Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded, complete all as specified. (Note : Mild steel sheet for covering to door shutter shall be measured sepratly.)

Material & Labour for 0.8mm thk Mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed.

Material & Labour for Steel ventilator with top hung shutter including hinges, steel peg stay, complete, dovetailed or welded, complete all as specified.

Material & Labour for Steel windows for industrial buildings with centre hung shutters including brass pivots, catch spring and pulley wheel complete, complete all as spedcified and directed.

Material & Labour for 5.5mm thk Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Material & Labour for 5.5mm thk Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Material & Labour for 40 mm PUF Sandwich with 0.5mm coorugated prepainted sheet on one side and another side with plain prepainted sheet (PU shall have density @ 40 Kg/cum), all as per specified & directed.

Material & Labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, all as specified and directed.

Material & Labour for preparation of new or previously untreated steel and iron surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint,and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

Material & Labour for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & Fix for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, as rain water pipe, complete all as specified.

Supply & Fix for 110mm dia PVC (SWR) bends any radius complete all as specified.

Material & Labour for 15mm thick Rendering in CM 1:4 mixed with water proofing compound, on other than fair faces of brick work or concrete surfaces all as specified and directed. Note : Water proofing compound shall be measured and paid separately

Material & Labour for 10mm thick Rendering in cement mortar 1:6, on fair faces of brick work or concrete surfaces all as specified and directed.

Material & Labour for finishing walls with Two or more coat of colour Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including preparation of surfaces all as specified and directed.

Material & Labour for preparation of newly plastered surfaces and applying three coats of white wash on wall.surface all as specified.

Material & Labour for plain cement concrete 75 mm thick of 1:4:8, type D-2 (using 40mm graded stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed.

Material & Labour for 40 mm thik cement concrete type B-0, 1:2:4 (12.5mm graded aggregate),finishing cement concrete surface even and smooth with using extra cement, complete all as specified and directed.

Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc , within a surface area n exc 0.1 Sqm and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed. Note:- The rate includes scaffolding required for upto 15 Mtr heigh buildings.

Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed.

Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc or equivalent by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc or equivalent all as recommended by product manufacturer and as directed by E-I-C complete all as specified and directed..

Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer and all as directed by Engr-in-Charge. Make suure that it should be applied not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified and directed.. Make :- Nitobond EP of FOSROCK or equivalent

Providing and applying not exceeding 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc or equivalent mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etc . Note:- Quoted rate for this item and relevant items are deemed to be included for providing scaffolding for working in patches (Approx not exceeding 1 Sqm) upto a height of 15 Mtr complete all as specified and directed.

Taking down existing loose or damaged APP membrane patches n exc 2 sqm by cutting the required patch and prepare the patch to recive new membrane treatment and providing APP based polymeric water proofing membrane 4 Kg/Sqm incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 0.2 Kg/sqm followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2Kg/Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 15 cm end overlap all as per manufacturer's instructions complete all as specified and directed.

Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, work in patches of min 1 Sqm all as specified and directed.

M&L for applying two coats of cement base paint over primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement after taking out existing damaged tiles in patches n exc 0.5 sqm all as specified and directed.

Material & Labour for Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one light/bell point controlled by one, one way switch complete, all as specified and as directed.

M&L for Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one ceiling/exhaust fan point controlled by one, one way switch, complete, all as specified and as directed.

M&L for Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one 05 Amps socket outlet point on same board, complete, all as specified and as directed.

M&L for Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one switch socket outlet point 5 Amps on independent board, complete, all as specified and as directed.

M&L for Point wiring with 2.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one 3 pin socket outlet, 15 Amps on independent board, complete, all as specified and as directed.

Supply and fixing Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

Supply and fixing Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

Supply and fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing stainless steel roof ventilators of size 22 to 24 inch non power driven operation suitable to fix roof sheet including necessary welding, drilling, riviting etc made with leak proof type, all as specified and as directed.

Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete all as specified and as directed.

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete all as specified and as directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals, all as specified and as directed.

M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB, all as specified and as directed. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

m/s prabakaran (BID ID -3355747)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3363864)

VIJAYA ENTERPRISES (BID ID -3364727)

p.chinnasamy (BID ID -3352684)

Vinayaga Buildings (BID ID -3364508)