SPL REPAIR OF CHAIN LINK FENCE OF CHILDREN PARK AND INCL REPLACEMENT OF TINTED GLASS,TILING,GLASS DOORS, FALSE CEILING, WINDOWS, LIGHTING,ELECTRICAL FITTING AND IT PANELS WITH FITTINGS OF ATC BLDG NO P-04 AND P-05 OF 671 AT DINJAN MIL STN

Amount

M&L for excavation in post holes each not exceeding 0.50Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc. and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

Dismantling natural ground posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for post, struts etc complete all as specified and as directed.

S&F for mild steel angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290, Gde E-165 complete all as specified and as directed.

S&F for mild steel screw bolts 5 to 10mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, small end exe 5cm and not exc 10cm long complete all as specified and as directed.

Supply only chain link mild steel galvanised fencing and PVC coated any size or type 4.0mm mm dia galvanized wire (100x100) mm mesh made upto matress lapped wire and laid on position / fixed on poles complete all as specified and as directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

S&F for mild steel framed work as in doors / gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, using steel Fe - 410W (Gde-E-250) quality 'B. Door etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed.

M&L for TMT 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping ends for columns, hooking ends and binding with and for fixing chain link fencing as in bearing bars complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel or iron surfaces exceeding 10cm width or girth and applying two coats of aluminium paint over one coat of red oxide primer complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide surfaces of any description not exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint including preparation of surfaces complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer over one coat of red oxide primer over 10cm width of grith including preparation of surfaces complete all as specified and as directed.

Dismantling plain or corrugated steeel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed.

S&F for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and as directed.

Dismantling of wall and ceiling boards or insulation board/slabs/ blankets any thickness including cover fillet complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame complete all as specified and as directed.

M&L preparing new asbestos cement sheet ceiling and applying three coats of white wash complete as specified and as directed.

Taking down chowkats or frames not exceeding 1.5Sqm each (without taking off shutters from frames) complete all as specified and as directed.

Taking down of chaukats or frame exceeding 1.5Sqm but not exceeding 4.5Sqm (without taking off shutters from the frames) complete all as specified and as directed.

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos. in each door, hinges, anodised aluminium snap beading screwes etc complete all as specified and as direcetd.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber packing, anodised aluminium snap beading screwes etc complete all as specified and as direcetd.

S&F for rough cast wired glass, 6.4mm thick and glazing with oil putty exceeding 0.5Sqm in square complete all as specified and as directed.

S&F for 5mm thick sheet glass, ordinary quality and glazing with oil putty exceeding 0.5Sqm in each pane complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F for cast iron door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35kg and fixed complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section in any position of framed work complete all as specified and as directed.

M&L for roof truses (framed), trussed, purlins, crane gantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pices, cleats etc.Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for mild steel flat iron as in wind ties for roofing incl uding securing bolts confirming to Fe-290 (Gde E-165) complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on other then fair faces of brick or concrete surfaces of wall in cement mortar (1:4) complete all as specified and as directed.

M&L for rendering 10mm thick on other then fair faces of brick or concrete surfaces of wall in cement mortar (1:6) complete all as specified and as directed.

M&L two coats of oil bound distemper to wall surfaces over a coat of primer including preparation of newly plastered surface of wall complete all as specified and as directed.

M&L for two coats of exterior emoulsion paint to walls surfaces over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer and putty to wall surfaces incl preparation of old surface of wall complete all as specified and as directed.

M&L for complete removal of existing treatment and treating with two coats of exterior emoulsion paint to walls surfaces over a coat of primer and putty including preparation of old surface complete all as specified and as directed.

Demolition of brick work or stone /boulder masonery built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facing complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6mm mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

S&F for solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and as directed.

S&F for 30mm thick factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , and bottom rail ,Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement, complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and as directed.

S&F for 150mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for 100mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and as directed.

S&F for 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

Demolition of conctrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregete) 25mm thick rough finished surfaces to receive tiles/Kota stone complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid tiles 300x300mmx7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400X400X7mm) in floor, over 20mm thick screed bed in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in skirting, over 10mm thick backing coat in cement mortar (1:4) on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for chequered cement concrete tiles 25cmx25cmx20mm thick set, jointed and pointed in neat cementsluny in floors over 20mm thick screed beb in Cm 1:6 complete all as specified and as directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, Lor T section, supports for shelves etc., and similar articles conforming to Fe 290 (Gde E-1650 including drilling holes complete all as specified and as directed.

S& F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Demolition of PCC in ground floor and pavings not exceeding 15cm thick complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with mastic filling in proportin of bitumen and sand (1:2) complete all as specified and as directed.

M&L for cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapet, copings, kneelers, apex stones incl necessary form work complete all as specified and as directed.

M&L for TMT 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping ends for columns, hooking ends and binding with and including mild steel wire annealed not less than complete all as specified and as directed.

S&F for pressed steell door frame 125x60mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and as directed. Note : PCC filling of holloow section measured and paid seprately.

M&L for PCC type C-1, 1: 3:6 (using 20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc. complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood made at site plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

S&F for glazed and skeleton shutters factory made 35mm thick open rebated & prepare to received glass, gauge etc edges of framing plain chamfered or rounded in window, ventilator etc are provided with stiles and rails in 2nd class hard wood complete all as specified and as directed.

S&F for 3mm thick sheet glass, ordinary quality and glazing with wooden beads/oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and as directed.

M&L for preparing newly wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs, vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket and flush pipe complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc. complete all as specified and as directed.

M&L for concealed point wiring with 1.5 sq mm (nominal area) single core pvc insulated FR unsheathed multi-standared copper conductor cable (maintaining colour code) , 1100 volt grade and including pvc conduitct (size as required site) concealed and sunken terminal boxes with 3 mm hylam sheet top cover of adequate size for mounting switches , sockets , regulators light fitting etc complete with all fitting and accessories fixed to wall /ceiling for one light /fan/call bell point concealed by one switch including one run 1.5 sq mm (nominal area) PVC insulated frame retardant unsheathed multistranded copper conductor cable green in colour for earth continuity conductor connected to common earth point duly complete all as specified and as directed.

All as per item No. 73 here-in-above but on 5 amp 3/5 pin socket outlet on independent board.

All as per item No. 73 here-in-above but on 5 amp 3/5 pin socket outlet point on same board with other switches.

All as per item No. 73 here-in-above but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both as continuous earth wire for one 15 Amps, 3 pin switch/socket outlet on independent board.

S&F for switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 Amp flush type complete all as specified and as directed.

S&F for switch socket combination 2 in 1, 5 Amp flush type complete all as specified and as directed.

S&F switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and as directed.

S&F ceiling rose, 3 way PVC insulated body complete all as specified and as directed.

S&F for stepped type electronic fan regulator flush type complete all as specified and as directed.

S&F for 18 W surface and wall mounted LED Batten with polycarbonate housing and intigrated including fitting to be fitted on PVC block of suitable size complete all as specified and as directed. Make : Cat No. LUMILINEBS18WLED865SPCWH of Havells /Philips/Bajaj/CG/Wipro

S&F for 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 including clamps/nut bolt/GI pipe for holding the security light complete all as specified and as directed. Make : Cat No ENDURAPEARLSL25WLED757SASYTOPC of Havells/Philips /Bajaj/CG/Wipro

S&F for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F for LED Lamp 9 Watt complete all as specified and directed. Make : Havells/Philips/Bajaj.

Taking down old MCB DB any type and S&F new sheet metal enclosure for MCB DB double door single pole & neutral 8 way, 240 V with common bus bar at incomming end complete all as specified and as directed.

S&F MCB 'C' curve single pole and neutral 6 to 32 Amps with breaking capacity 10 kA, complete all as specified and as directed. Make: Cat No. 408609-17 of Legrand/L&T/Havells.

S&F MCB 'C' series SP 6 to 32 Amps, 240 volts, breaking capacity 10KA, complete all as specified and as directed. Make: Cat No. 4086 09-17 of Legrand/L&T/Havells.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering including the earth pit base in which pit cover rests made up of MS angle iron frame complete all as specified and as directed and tested on completion.

Vicky Construction

NChetia and Sons Trading

STANDARD ELECTRIC WINDERS

M/s GANDHESWAR PHUKAN

FREEZCON

Kaushik Enterprises

Bimal Trading Company