Supply and laying of Power and street Light Cable along with allied works at Urja Vihar Colony OSPS

Supply of XLPE insulated power cable conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor "4 core armoured X 16 sq. mm"

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. "50.00mm outside dia."

Laying of one number armoured / unarmoured power cable 1:1 KV grade of size not exceeding 25 sq. mm in the existing RCC hume/stone ware/G.I. pipe/surface in existing trench as required. "4 core armoured X 16 sq. mm"

Supplying and erection of water tight terminal box made of PC-GFS (polycarbonate),IP 66 /IP 67 (cable entry systems LES) in accordance with IEC 60670-22, resistant to weather influences (UV due to solar radiation, protected against rainwater, temperature resistant, impact resistant, etc. insulation voltage 1000 V a.c./d.c., wall thickness of the bottom part 2 / 2.7 mm of required size suitable for kit kat/MCB/switch including 2 nos. pole clamp of M.S. flat iron size 32x3mm, nut and bolts, excluding the cost of the kit kat/MCB/Switch, 4 Pole epoxy connector nut & bolt type, 30Amp, 500Volt complete as per specification as mentioned below. "Size130 x 180 x 77 mm"

Supply of XLPE insulated power cable conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor "3.5 core armoured X 185 sq. mm"

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. "90.00mm outside dia."

Laying of one number armoured / unarmoured power cable 1.1 KV grade of size exceeding 120 sq. mm but not exceeding 400 sq. mm. in the existing RCC Hume /Stone are/G.I. Pipe/surface in existing trench as required. Cable size "3.5 core armoured X 185 sq. mm"

Laying of one number armoured / unarmoured power cable 1.1.KV grade of size exceeding 25sq. mm but not exceeding 120 sq. mm direct in ground including excavation in all soil/ murrum /soft rock, sand cushioning, protective covering and refilling the pit etc. as required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete

Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete. For conductor size-16 sq. mm

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 0.5Amp to 5Amp 10kA rating

Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete. For conductor size- 185 sq. mm

Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete. For conductor size- 95 sq. mm

Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer, rubber ring complete erected with cable and lead connection etc. as per specification complete. Gland size 57 mm, 3 x 225 sq. mm, 3 ½ x 185 sq. mm

Supply of approved high-tension XLPE cable (conforming IS-7098/II/85) as per ISI standard 3 core armoured with alu. solid/stranded conductor ISI marked as required. 3 core XLPE cable 11 KV grade 185 sq. mm.

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. 90.00mm outside dia.

Laying of one number 3 core H.T armoured/unarmoured power cable of grade exceeding 1.1KV but not exceeding 11KV of size not exceeding 300 sq. mm in the existing RCC/hume/stoneware/G.I. pipe/surface in existing trench as required. For cable size 3 core XLPE cable 11 KV grade 185 sq. mm.

Providing & Making cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 33 KV/11 KV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete. Heat shrinkable joint, kit 11 KV XLPE, 3 core Heat shrinkable Jointing kit 11 KV XLPE cable O.D. termination 3 x 150-225 sq. mm. For cable size 3 core XLPE cable 11 KV grade 185 sq. mm.

Providing & Making cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 33 KV/11 KV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete. Heat shrinkable joint, kit 11 KV XLPE, Heat shrinkable jointing kit 11 KV XLPE cable I.D. termination, 3 x 150-225 sq. mm. For cable size 3 core XLPE cable 11 KV grade 185 sq. mm.

DARSHAN ANUSUIYA ASSOCIATES PRIVATE LIMITED

NEERAJ KUMAR JAIN

ELECTROVATION GLOBAL TECHNOLOGY LLP

GREEN ENERGYZ