Repair to sewage line, cleaning/disludging of manholes chambers septic tanks/ soakage well repair to eall drain path and other misc work at Sewar Fort of Mil Stn Bharatpur

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M/L Cement concrete in foundations filling and mass concrete type D-2 1:4:8 ( 40 mm graded aggregates )

M/Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6

Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cm 1:6

M&L for PCC in surface channals and drain 1:2:4 type -B1 all as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

M/L Providing cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates as directed

M/Lrendering 15mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth w/o extra cement

Ditto as above item no 8 but on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement.

Supplying only integral water proofing compound

Dismantling of interlocking tiles of any description , any thickness

M/L100 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )

M&L for factory made chamfered edge Cement Concrete paver blocks M35 grade & 60mm thickness in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge (sand should be paid in seprate item)

ditto as per item No 15 but except tiles

Supply only river sand as specified and as directed by Engr -in -Charge

M&L PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete in walls setting in CM (1:6).

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for plain cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in floors finished even and smooth using extra cement

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar150mm

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 200mm

Taking out existing stone slab manhole cover/soakagewell/septic tank in any situation/position and any thikness

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting ou in soft/loose soil

Excavating in trenches, n. exc 1.5m wide and exceeding 1.5 m but n.exceeding 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and and getting outin soft/loose soil

ditto-as item No. 25 but depth exceeding 3m & n.exc 4.5m

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft / loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for 150 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

M&L for 200 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4

S&F Mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality

S&F mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

S&F mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strips, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (100 mm) bore.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore

Taking out sludge,debris,glass/ PVC bottle and any type garbage from choked sewage line of 100mm to 150mm dia including cleaning line with water and removal of same in closed vehicle out of MD land as specified and directed

Taking out sludge,debris,glass/ PVC bottle and any type garbage from choked sewage line of 200mm to 300mm dia including cleaning line with water and removal of same in closed vehicle out of MD land as specified and directed

Cleaning of septic tank/soakage well manhole of any size & capacity by removing solid or semi solid sludge by mechanically or manually including removal of sludge in covered vehicle to a distance exc 500m but n.exc3000m & buried in excavated pit of adequate size including excavation and covering with earth as directed by Engineer-in-charge(measurement will be taken only after de-watering of tanks)

Dewatering of septic tank/soakage well /manholesof any size, depth and capacity by manually or mechanically & removing water into nearly drain complete all as specified & directed.

Cleaning of blockage EWC/IWC/urinal/bathroom & Kitchen cleaning including gully trap, Nahani trap& removing of sludge/spoil/waste to a distance exc 100mtr & testing of WC block for proper working after cleaning complete all as specified & directed.

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mmx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified

Dismantling of old existing unserviceable WHB glazed and S&F new vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete in repairs.

S&F in repair of 110 mm dia PVC(SWR) pipe single socketed in any length with rubber ring joints laid in trenches ,in floor including necessary clamps complete all as specified and directed.

–ditto- all as item 47 as above fixed on wall

S&F PVC (SWR) vent pipes 75 mm dia single socketed in any length with rubber joints fixed to walls

S&F PVC (SWR) vent cowl 75mm dia

S&F in repair of PVC bends any radius 110mm bore

S&F 100 mm bore PVC cowls.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :- 53.01 15 mm bore

20 mm bore

S&F in repair pillar tap, cast copper alloy with capstan heads,chromium plated,fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified & directed.

S&F facy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F waste coupling brass chromium plated 32 mm bore with long screwed shanks and fly nuts including 32 mm PVC waste pipe for WHB complete all as directed.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia for LLFC fixed in repairs

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 15 mm thick rendering in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm bur not exceeding 0.16 sqm, over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match for repair & matched to existing floor tiles in patches.

M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone agg as in channel/benching in man hole etc,finished even and smooth using extra cement incl necessary form work

Desiliting and cleaning (taking out of debris/silt,rubbish etc) from heavily chocked drains in different locations of Sewar Fort and parade ground area by mechanical device as like super sucer and suction cum jetting /manually etc as directed by Engineer-in-charge(measurement will be taken only after de-watering of tanks)

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (Horizontal or slopping).

Reinforced cement concrete M-20 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M/L Cement concrete in foundations filling and mass concrete Type C-2 1:3:6( 40 mm graded aggregates )

S&F MS work as in angle iron fencing post, fixed independently for fixing chain link fence, including all necessary cutting, drilling holes, bolting etc for screwing chain link fencing all as directed.

Supply only chain link fencing 4mm dia galvanized steel 50 mm x50mm mesh fixed to angle iron fencing post or angle frame complete all as directed.

Fixing only chain link fencing including line wires, any mesh size and type of standards rails straining barbs etc incl permission of binding wire.

S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 05 cm nexc 10 cm long dia of shank 05 to 10 mm.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L loose filling with broken bricks of aggregates of gauge 80 to 150 mm in soakage pits, soakage wells

Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified and as directed

S & F in repairs Gun-metal, globe of gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

B R ENTERPRISES

M/S MAMTA CONSTRUCTIONS

M/s K Prashad and Sons

Pioneer Enterprises

krishna Associate