D/G EOT CRANES ABOVE 100T

ANNEXURE-II DEVIATION SHEET (COST OF WITHDRAWAL)

PROJECT:- 4x225 MW Arun-3 Hydro Electric Project

PACKAGE :- D/G EOT CRANES ABOVE 100T

TENDER ENQUIRY :- 77/26/6034/SAN Date 11.05.2026

NAME OF THE BIDDER

1 TECHNICAL DEVIATION

2 COMMERCIAL DEVIATION

NOTES: 1. Cost of Withdrawal of deviation will be applicable on the basic price (i.e. excluding taxes, duties & freight) only. 2. All the bidders have to list out all their technical & commercial deviations (if any) in details in the above format. 3.Any deviation not mentioned above and shown separately or found hidden in offer, will not be taken cognizance of. 4.Bidder shall submit duly filled unpriced copy of above format indicating "quoted" in "cost of withdrawl of deviation" column of the schedule above along with their Techno-commercial offer, wherever applicable. In absence of same, such deviation(s) shall not be considered and offer shall be considered in total compliance to NIT. 5. Bidder shall furnish price copy of above format along with price bid. 6.The final decision of acceptance/ rejection of the deviations quoted by the bidder shall be at discretion of the Purchaser. 7.Bidders to note that any deviation (technical/commercial) not listed in above and asked after Part-I opening shall not be considered. 8. For deviations w.r.t. Credit Period, Liquidated damages, Firm prices if a bidder chooses not to give any cost of withdrawl of deviation loading as per Annexure-VII of GCC, Rev-07 will apply. For any other deviation mentioned in un-priced copy of this format submitted with Part-I bid but not mentioned in priced copy of this format submitted with Priced bid, the cost of withdrawl of deviation shall be taken as NIL. 9. Any deviation mentioned in priced copy of this format, but not mentioned in the un-priced copy, shall not be accepted. 10. All techno-commercial terms and conditions of NIT shall be deemed to have been accepted by the bidder, other than those listed in unpriced copy of this format. 11. Cost of withdrawl is to be given seperately for each deviation. In no event bidder should club cost of withdrawl of more than one deviation else cost of withdrawl of such deviations which have been clubbed together shall be considered as NIL. 12. In case nature of cost of withdrawl (positive/negative) is not specified it shall be assumed as positive. 13. In case of descrepancy in the nature of impact (positive/ negative), positive will be considered for evaluation and negative for ordering.

NAME OF PROJECT: 4x225 MW ARUN-3 HEP NEPAL

NAME OF PACKAGE: SUPPLY OF DAMAGED ITEMS & SUPERVISION SERVICES OF RESTORATION OF DOUBLE GIRDER EOT CRANES (250/50/10T)

TECHNICAL SPECIFICATION: PE-TS-437-501-A001A

ENQUIRY NO 77/26/6034/SAN Date 11/05/2026

Main Supply Supervision Services

S. No. DESCRIPTION UNIT QTY Total Delivered Duty Paid (DDP) at BHEL Arun-3 Site Price (INR) Total Price of Supervision Services inclusive of Tax & Duties, as applicable (INR) Total Price of the Package (INR)

0.0 Total lump sum firm price for SUPPLY PART, SERVICE PART (SUPERVISION) comprising of manufacture/procurement, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, fill of lubricants & consumables along with all accessories forwarding, proper packing, shipment and delivery, supervision of replacement of supplied items, demonstration of operation including tandem operation of EOT cranes for the total scope defined as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. Lot 1

0.0 MAJOR BREAK-UP OF PRICES GIVEN IN 1.0 ABOVE

0.0 Total lump sum firm price for SUPPLY part comprising of manufacture/procurement, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, fill of lubricants & consumables along with all accessories forwarding, proper packing, shipment and delivery for the total scope defined as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. (Price break up to be furnished at Annexure- I). Nos 1

0.0 Total lump sum firm price for SERVICE part comprising of Supervision of replacement of supplied items, demonstration of operation including tandem operation of EOT Cranes for the total scope defined as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. (Price break up to be furnished at Annexure- II). Lot 1

ANNEXURE-I: PRICE BREAKUP FOR SUPPLY PART

NAME OF PROJECT: 4x225 MW ARUN-3 HEP NEPAL

NAME OF PACKAGE: SUPPLY OF DAMAGED ITEMS & SUPERVISION SERVICES OF RESTORATION OF DOUBLE GIRDER EOT CRANES (250/50/10T)

TECHNICAL SPECIFICATION: PE-TS-437-501-A001A

S. No. DESCRIPTION QTY UNIT Unit Delivered Duty Paid (DDP) at BHEL Arun-3 Site Price (INR) Total Delivered Duty Paid (DDP) at BHEL Arun-3 Site Price (INR)

BREAK-UP OF Sl No 2.1 OF MAIN SHEET

1 VFD Altivar-71 (30kw - 40HP) 380/480v For LT Motion 1 no.

2 Long Travel DBR (OHMS-14, 42 Amp) 1 no.

3 MH - DC Brake 1 no.

4 Long Travel All Thruster Brakes (All Thruster Brake Condition ) 4 nos.

5 Brake rectifier 400 V AC to a190 V DC 7 nos.

6 CT Motor Thruster Brake 1 nos.

7 MH, AH, Monorail MH Motion Encoders, connector & adapter 3 nos.

8 Gravity Limit Switch (MH, AH & Monorail MH) 3 nos.

9 Main Hoist and AH Load Cell Completed set, Load cell Pin, Load cell controller & Remote Display 1 set

10 Monorail Main Hoist Motor 190V DC Disc Brake 1 no.

11 Monorail CT Motor 190V DC Disc Brake 1 no.

12 All Panels Heaters & thermostat as per Design 6 nos.

13 Monorail CT Master Control (Volts -500, Amps- 40/10, C/S-50 Steps-4, Cams-6 1 no.

14 Main Hoist Thruster Brake 1 no.

15 AH Thruster Brake 1 no.

16 Encoder 6 nos.

17 Long Travel Anti Collision Device with Reflector As per Design. 1 no.

18 Cross Travel Limit Switch (TYPE-LS/1SH/2 2 nos.

19 Long Travel Limit Switch (TYPE-LS/1SH/2 1 no.

20 PLC Ethernet Switch 1 no.

21 3 Position Selector Switch witch NO, NC 5 nos.

22 Canopen 2 nos.

23 Remote & Receiver complete set 1 no.

24 Monorail Main Hoist Motor RPM-961, KW-6.5, HP- 8.6, A-15.20 1 no.

25 Monorail Cross Travel Motor (RPM-900, Kw- 0.55, Hp- 0.75 Amps- 1.64 1 no.

26 PLC Module on returnable basis 2 nos.

27 Essential Power Output DC 24V 120W 1 no.

28 All Panels MCCB Handles 10 nos.

29 Main Hoist Rotary Limit Switch 1 no.

30 AH Rotary Limit Switch 1 no.

31 Monorail Cross Travel Limit Switch (TYPE- LS/1SH/2 1 no.

32 Monorail Main Hoist Rotary Limit Switch 1 no.

1 Long Travel All Thruster Brakes 4 nos.

2 CT Thruster Brakes 2 nos.

3 MH, AH, Monorail MH Motion Encoders, connector & adapter 4 nos.

4 Gravity Limit Switch (MH, AH & Monorail MH) 3 nos.

5 Main Hoist And AH Load Cell Completed set, Load cell Pin, Load cell controller & Remote Display 1 set

6 Remote & Receiver complete set 1 set

7 Monorail CT Motor 190V DC Disc Brake 1 no.

8 Panels Heaters & thermostat As per Design 7 nos.

9 Main Hoist Rotary Limit Switch 1 no.

10 Bearing for LT wheel as per the design 8 nos.

11 AH Rotary Limit Switch 1 no.

12 Long Travel Master Control ( Volts -500, Amps40/10, C/S-50 Steps-4, Cams-6 1 set

13 Main Hoist Thruster Brake 1 no.

14 AH Thruster Brake 1 no.

15 Long Travel Anti Collision Device With Reflector As per Design. 1 no.

16 Cross Travel Limit Switch (TYPE-LS/1SH/2 2 nos.

17 Long Travel Limit Switch (TYPE-LS/1SH/2 1 no.

18 Monorail Cross Travel Limit Switch (TYPE-LS/1SH/2 1 no.

19 Monorail Main Hoist Rotary Limit Switch 1 no.

20 PLC Ethernet Switch 1 no.

21 3 Position Selector Switch witch NO, NC 5 nos.

22 Canopen module 2 nos.

23 Essential Power Output DC 24V 120W 1 no.

24 PLC Penal Relay with Base 24V DC 8pin 4 nos.

25 Monorail Cross Travel Motor (RPM-900, Kw-0.55, Hp- 0.75 Amps- 1.64 1 no.

26 All Panels MCCB Handles 10 nos.

27 Long travel Motor (Rpm-961, Kw-6.5, HP-8.6, A- 15.20 1 no.

28 PP Panel Change over Switch as per design 1 no.

C Common for both cranes

1 PLC Ethernet Cable 30 mtrs

2 Touch up paint: Polyurethane 80 ltr

3 Cadmium compound for wire ropes 25 kg

GRAND TOTAL : Total price for SUPPLY (Sum of A.1 to 32 + B.1 to 28 and C.1 to 3)

Note: 1) Any variation in quantity of items shall be adjusted based on prices quoted above against each item.

ANNEXURE II: PRICE BREAKUP FOR SERVICE PART (SUPERVISION OF REPLACEMENT OF SUPPLIED ITEMS, DEMONSTRATION OF OPERATION INCLUDING TANDEM OPERATION FOR EOT CRANES AT SITE)

NAME OF PROJECT: 4x225 MW ARUN-3 HEP NEPAL

NAME OF PACKAGE: SUPPLY OF DAMAGED ITEMS & SUPERVISION SERVICES OF RESTORATION OF DOUBLE GIRDER EOT CRANES (250/50/10T)

TECHNICAL SPECIFICATION: PE-TS-437-501-A001A

S. No. Description Unit Qty Unit Price inclusive of Tax & Duties, as applicable (INR) Total Price inclusive of Tax & Duties, as applicable (INR)

BREAK-UP OF Sl No 2.2 OF MAIN SHEET

1 Total lump sum prices for VISIT (should include travel expenses to/ fro site,visa/insurance (if applicable), intermediary stay) for Supervision of replacement of supplied items, demonstration of operation including tandem operation of EOT Cranes for the total scope defined as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. Nos. 3

2 Total lump sum prices for SUPERVISION (in days) of Supervision of replacement of supplied items, demonstration of operation (including tandem operation) and any other site requirement (if required) for EOT Cranes for the total scope defined as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. days 12

3 Total of 1 to 2

Note: 1. No. of days at site defined at S.N. 2.2 above shall be calculated on the basis of presence at site (travel time is excluded). 2. No. of Visits and Days for supervision may vary depending on site requirement. Any variation in no. of visits & no. of days shall be exercised based on unit rate arrived from S.N. 2.1 & 2.2 above respectively. 3. Payment shall be made on pro-rata basis.