C/o 60.837 mt span box girder bridge over Jhangi Nallah

Amount

Earth work in excavation for foundation of bridge structures (Abutments) in all depths as per drawing and MORTH specification clause 304 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock(where blasting is prohibited). All type of classifications of soil by manual / mechanical means comprising of ordinary rock, soft rock, / Hard rock as per drawing and technical specification and as per direction of Engineer -In - Charge including carriage of materials with in all leads and lifts and other incidental. Hauling and stacking of useful materials for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner trimming filling of unevenness blindage and finishing of the bridge site to specified dimension or as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST , Labor cess, or other taxes imposed by the Government.

Providing and laying cement concrete PCC M- 10 (Ten) grade 1:3:6 ( One cement : three sand : Six aggregate using graded/ crushed 40 mm nominal size stone aggregate minimum cement contents not less than 230 ( Two hundred thirty) Kilograms Per Cubic metre as specified in design mix mechanically mixed placed in open foundation and compacted by vibration including the cost of form work and curing complete including pumping or bailing out water dewatering, removal of slush as required at site which may arise at the time of aying of under water complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge and MORTH section 2100. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

Providing and laying Plain / reinforced cement concrete Mechanically mixed and vibrated Plain cement concrete M-20 (Twenty) using graded crushed stone aggregate minimum cement contents not less than 344 ( Three hundred forty four) Kilogram per Cubic metre as specified in design mix in foundation and substructure in abutment/ piers complete as per drawing and MORTH technical specifications clause 1500,1700 & 2200 including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Providing and laying Plain / reinforced cement concrete Mechanically mixed and vibrated reinforced cement concrete M-25 (Twenty five)grade using graded/ crushed stone aggregate minimum cement contents not less than 403.33 ( Four hundred three point three three) Kilogram per Cubic metre as specified in the design mix in substructure complete as per drawing and MORTH technical specifications clause 1500,1700 & 2200 including the cost of form work, curing complete in dirt wall and bed block of abutment/pier and including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement made of TATA SAIL, TISCO. in foundation & substructure of bridge complete as per drawings and technical specifications clause 1600 & 2200 including the cost of bending, binding, cutting and placing in position of bars complete and including the cost of winding wire including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Providing and laying of filter media with granular material/ stones crushed aggregate satisfying the requirements laid down in clause 2504.2.2 of MORTH specifications to a thickness of not less than 600mm(six hundred millimetre) with smaller size towards the soils and bigger size towards the wall and providing over the entire surface behind abutment wing wall return walls, to the full height compacted to firm condition complete as per drawing and technical specification Rural Road . including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government..

Plain/reinforcement cement conocrete PCC Grade M-15 (fifteen) in sub structure complete as per drawing and technical specification including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government..

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing confirming to IRC : 83(pt-1) section IX and clause 2003 of MORTH specifications complete including all accessories as per drawing and Technical Specifications and clause 2000, 1000 and 2200 including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level forged steel rocker bearing confirming to IRC: 83 part-I section IX clause 2003 of MoRTH Specifications complete as per drawing and approved Technical Specifications including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST , labor cess or other taxes imposed by the Government.

Furnishing and Placing Reinforced/Prestressed RCC/PSC grade M-35 (Thirty five ) grade using graded /crushed stone aggregate minimum cement contents not less than 422 (Four Hundred twenty two ) Kilogram per cubic metre as per design mix minimum cement as specified in design mix Mechanically mixed and vibrated cement concrete in super-structure as per drawing and Technical MORTH specification including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor Cess or other taxes imposed by the Government.

Providing and laying reinforced Cement concrete M-30 (Thirty) Mechanically mixed and vibrated in Approach slab including reinforcement complete as per drawing and MORTH technical specifications clause 1500,1600,1700, & 2704 including the cost of form work and curing complete and entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and laying concrete Mechanically mixed and vibrated wearing coat M-30 (Thirty) grade using graded /crushed stone aggregate as per design mix minimum cement as specified in design mix including reinforcement complete as per drawings and technical specifications including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

Supplying, fitting and placing HYSD Bars reinforcement made of TATA SAIL, TISCO. in superstructure complete as per drawing and MORTH technical specifications clause1600 including the cost of bending, binding, cutting and placing in position of bars complete and including the cost of winding wire including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Construction of precast RCC railing of M30 (thirty) Grade, Using Ordinary Portland Cement mechanically mixed aggregate size not exceeding 12 mm (twelve millimetres), true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimetres), leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications and reference to MORT&H specification 2703, 1500, 1600 & 1700 including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Providing and fixing Drainage Spouts complete as per drawing and Technical specification of MORT&H section 2705 as directed by the Engineer-in-Charge including the cost of Labor for fabrication and for fixing in position including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, Labor cess or other taxes imposed by the Government.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement up to 70 (Seventy) millimetres , complete as per approved drawings and standard specifications to be installed by the manufacturer / supplier or their authorized representative ensuring compliance to the manufacturer's instructions for installation and MORTH Specifications 2607 including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

Providing and fixing in position 20(Twenty) millimetres thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up to 20 mm, covered with sealant complete as per drawing and technical specifications including the cost of form work and curing complete including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6(Six) percent bitumen by weight and MORTH specifications including entire carriage of material in all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying plain/reinforced Cement concrete M-15 (Fifteen) in levelling course under approach slab complete as per drawings and technical specifications clause 800 & 1211 including the cost of form work and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST, labor cess or other taxes imposed by the Government.

rohit sharma