COMPREHENSIVE AND PREVENTIVE MAINT OF DG SET AND CONNECTED WORKS UNDER AGE EM OF GE SGNR

Amount

M/L for Maintenance and servicing of DG Set of capacity 250 KVA Make Kirloskar/Cummin complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 200 KVA Make Kirloskar complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 100 KVA Make Cummin complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 62.5 KVA Make Cummin / Greaves cotton complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 50 KVA Make mahindra powerol complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 40 KVA Make mahindra powerol/ Ashoka leyland complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M/L for Maintenance and servicing of DG Set of capacity 30 KVA Make Cummin complete including following :- (a) Draining out engine oil from the chamber cleaning the chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set (f) Checking & cleaning air cleaner (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (l) Testing of DG set at connected load all as directed by the Engr in charge. Note (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set

M & L for draining existing radiator, cleaning thoroughly the radiator fins by air blower recharging the chemically treated coolant including replacement of all water hose pipe suitable for 30 KVA to 62.5 KVA DG Sets complete all as specified and directed by Engineer - in - Charge.

M & L for draining existing radiator, cleaning thoroughly the radiator fins by air blower recharging the chemically treated coolant including replacement of all water hose pipe suitable for 100 KVA DG Sets complete all as specified and directed by Engineer - in - Charge.

M & L for draining existing radiator, cleaning thoroughly the radiator fins by air blower recharging the chemically treated coolant including replacement of all water hose pipe suitable for 200 KVA to 550 KVA DG Sets complete all as specified and directed by Engineer - in - Charge.

M & L for dismantling the self starter 12 / 24 Volts DC of DG sets and transporting to work shop for carrying out overhauling by replacing all unserviceable spares including pinion, reassembling and refixing the same to DG sets including testing complete all as specified and directed by Engineer - in - Charge.

S&F in replacement PVC insulated multistranded copper conductor cable 2 M length each soldered with 02 Nos gun metal battery terminals suitable for 180 AH and 24 Volts DC supply complete all as specified and directed by Engineer - in - Charge.

Supply and topping up of coolent for DG set in sealed container Make as reccomended by OEM of DG Set complete all as specified and directed by Engineer - in - Charge.

Taking out defective fuel injection pump of DG set Cap 30 KVA to 62.5 KVA , transporting to work shop and cleaning of injectors nozzles and overhauling complete including calibrating and re-fixing the same including testing the DG Set to the entire satisfaction of Engineer-in-charge.

Taking out defective fuel injection pump of DG set Cap 100 KVA to 250 KVA , transporting to work shop and cleaning of injectors nozzles and overhauling complete including calibrating and re-fixing the same including testing the DG Set to the entire satisfaction of Engineer-in-charge.

Taking out defective old flexible fuel pipe from DG set including S&F new flexible fuel pipe 15 mm suitable clips accsesories complete all as specified and directed by Engineer - in - Charge.

Supply and replacement of battery maintenance free 12 volts 150 AH including initial charge and connected DC cable thimble nut, bolts etc including testing complete all as specified and directed by Engineer - in - Charge. Make :Exide

Supply and replacement of battery maintenance free 12 volts 80 AH including initial charge and connected DC cable thimble nut, bolts etc including testing complete all as specified and directed by Engineer - in - Charge. Make :Exide

Supply and installed testing, commissioning in replacement of AVR suitable for 30 KVA & 50 KVA DG Set complete all as specified and directed by Engineer - in - Charge.

Supply and installed testing, commissioning in replacement of AVR suitable for 62.50 KVA & 250 KVA DG Set complete all as specified and directed by Engineer - in - Charge.

S&F in replacement of self starter 12 V suitable for 62.5 KVA to 100 KVA DG set complete all as specified and directed by Engineer - in - Charge.

Supply and replacement of rubber coupling nut bolt & washers of DG capacity 30 KVA to 62.5 KVA complete and alignment of DG set engine with alternator including complete all as specified and directed by Engineer - in - Charge. Note : Cost T&P required for dismantaling of alternator and engine for replacement of rubber coupling will deemed to be included in quoted rate.

Supply and replacement of rubber coupling nut bolt & washers of DG capacity 100 KVA to 250 KVA complete and alignment of DG set engine with alternator including complete all as specified and directed by Engineer - in - Charge. Note : Cost T&P required for dismantaling of alternator and engine for replacement of rubber coupling will deemed to be included in quoted rate.

Cleaning of radiator Assy, by cleaning fins and descaling complete including checking for leakage and repairing the leakage, soldering the broken tubes complete all as specified and directed by Engineer - in - Charge.

Repair to alternator of DG set 30 KVA to 250, servicing, greasing of alternator, cleaning the dust including replacement of defective rectifier of suitable capacity, testing complete of alternator for out put voltage and load etc complete all as specified and directed by Engineer - in - Charge.

M & L for repairing, welding doors to main body and making good for the canopy of DG set off capacity including painting with exixting colour after surface preparation complete all as specified and directed by Engineer in charge

M & L replacement of locks of doors of canopy of DG set af any capacity complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of power contactor 100 Amp with fitting suitable for AMF panel 100 KVA including all necessary fittings complete all as specified and directed by Engineer in charge

Supply and fix in replacement of controller unit suitable for 250 KVA DG set Kirloskar alongwith fittings complete all as specified and directed by Engineer in charge.

Supply and fix in replacement MCCB 4 pole 160 Amps,25 KA, 415 Volts AC supply complete all as specified and directed by Engineer in charge

Supply and fix in replacement oil sensor with fittings complete all as specified and directed by Engineer in charge.

Supply and fix in replacement portable battery charger 12/24 V with fittings complete all as specified and directed by Engineer in charge.

S&F in replacement MCCB, 63 Amps, 4 pole, 415 Volts, rupturing capacity not less than 10 KA, Icu=100% with built in protection function for overload, short circuit and double break fast tripping mechanism complete withspreader link including thimbles, nuts, bolts, washers etc. making including incoming and outgoing connection complete all as specified and directed by Engineer - in - Charge.

S&F in replacement MCCB, 100 Amps, 4 pole, 415 Volts, rupturing capacity not less than 10 KA, Icu=100% with built in protection function for overload, short circuit and double break fast tripping mechanism complete withspreader link including thimbles, nuts, bolts, washers etc. making including incoming and outgoing connection complete all as specified and directed by Engineer - in - Charge.

S&F in replacement three phase off load changeover 415 V 160 amps complete with suitable outdoor panel IP 65 protection made out of CRCA mild steel sheet, thickness 2.25 mm single door with lock arrangement and grouting on ground including all necessary electrical connections with accessories complete all as specified and as directed by Engineer-in-Charge.

Note : Amount of credit of Rs 25990.00 for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

TARA ENTERPRISES

NATIONAL ENTERPRISES

AYUSH BUILDERS