Karnataka

Active

Works

Irrigation and Other Works

Providing Irrigation Facility to Drilling Borewell of land in 1) Nataraju S/o Obaiah of Battiganahalli Village in Bukkapattana Hobli, Sira Taluk. 2) Smt.Gangamma W/o Late Ramaiah of Daggenahalli Village in Handanakere Hobli, 3) Smt.Sushilamma W/o Kempaiah of Siddanakatte Village in Kandikere Hobli, Chikkanayakanahalli Taluk.

Minor Irrigation Department

Minor Irrigation Division Tumkur | Tumakuru, Karnataka

Amount: ₹11.9 LCloses: 27 Jul 20262d left

Timeline

Published16 Jul 2026
Closes27 Jul 2026
Bid Opening28 Jul 2026

Tender Value

₹11.9 L

EMD Value

₹30,000

Closing Date

27 Jul 2026, 10:30 pm2d left

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

SOMAIAH B R

Mobile Number

8217049873

Work Description

Providing Irrigation Facility to Drilling Borewell of land in 1) Nataraju S/o Obaiah of Battiganahalli Village in Bukkapattana Hobli, Sira Taluk. 2) Smt.Gangamma W/o Late Ramaiah of Daggenahalli Village in Handanakere Hobli, 3) Smt.Sushilamma W/o Kempaiah of Siddanakatte Village in Kandikere Hobli, Chikkanayakanahalli Taluk.

Tender Information

Tender ID

MI/2026-27/IW/WORK_INDENT12350

Reference Number

MI/2026-27/IW/WORK_INDENT12350

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Tumkur

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate Certified by Chartered Accountant with UDIN No.,,IT returns acknowledgement with Balance sheets of 5years

RequiredCompany Registration Certificate /Class III KPWD/MI Class of Registration Certificate

RequiredOwn/Hire/Lease borewell rig 7A Certificate from ground water authority

RequiredThe Tenderer should submit the Statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed as per section 3.

RequiredContractor should produce the updated IT clearance Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The borewell drilling work has to be executed under the supervision of Assistant Executive Engineer of concerned Sub-Division / A.E of Sub-Divisional Works unit.

The material should be of ISI marked and approved quality of competent authority and the purchase bill invoice and repayment of procurement should be produced on completion of work.

The guarantee period of actual equipment will be one year from the date of commissioning / handing over and if any defects / trouble arises during the period of one year the cost of repair and replacement should borne by the tenderer.

Conditional tender will not be considered.

Sub - leasing / G.P.A of work is prohibited

Tender application amount will not be refundable

The contractor has to compete the bid (quote the rates) for all Schedule B items of the works mentioned

The Contractor shall pay the Earnest Money Deposit EMD & Tender Transaction fee in the KPPP portal using any of the following payment modes Credit Card, Direct Debit, National Electronic Fund Transfer (NEFT), Over the Counter (OTC)

The tenderer shall scan and upload all the original documents required for this bid to the KPPP portal. The original documents shall be produced at the time of physical verification.

1Percentage of the bill amount of the successful tenderer will be deducted towards cess as a labour welfare fund

The contractor has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials

All documents enclosed should be attested by Gazetted officer or Government Notary, otherwise the bids are liable for disqualification. Original documents should be produced for verification at any stage of the Tender process, as and when sought for. Failure to produce original documents will lead to disqualification. Work done certificates should have all the CR no, work order issuing date, work completion date and year and it should be signed not below the rank of Executive Engineer.

The Tenderer shall have valid Class III and above Civil contractor license issued by KPWD/MI (uploaded original registration certificate should be produced during evaluation)

Omission and typographical errors which are in the opinion of the executive Engineer will not be a ground for claims of extra payment

The tenders are invited as per Standard tender Bid Document KW-1 and shall abide for the conditions contained in Standard tender Bid Document KW-1.

Price adjustment clause will not be applicable as per prevailing government order and only star rates are applicable.

The contractor shall quote the rates WITHOUT adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractors bid amount

Executive engineer reserves the right to accept or reject any tender and to cancel the tender process and reject all tenders at any time prior to award of contract, without there by incurring any liability to the affected tenderer or tenderers or any obligation to inform the affected tenderer or tenderers of the grounds for the employers action

GST & EPF registration certificate from competent authority

IT & GST will be deducted as per government order

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated: 01-04-2023

The contractor must upload existing commitment of the ongoing works in hand for the calculation of tender capacity if he fails to submit the existing commitment details such tenders are liable for rejection

All documents to be furnished are to be counter signed by the employer in charge, not below the rank of an executive in-charge or equivalent.

The Defects Liability Period is 365 Days after the completion of work

The contractor should have own / hire / leased bore well drilling rig registered with Karnataka Ground water authority, Bangalore and Form-7A issued by the competent authority to be uploaded.

Any incident occurring during the process of drilling of borewell work will be sole responsible of the contractor and department is not responsible for any such incidents.

The bidder should submit copy of letter issued by geological department regarding borewell point and depth at which water is available. (In presence of AEE & Section officer concerned)

The bore wells should be drilled in the lands of the beneficiaries as per the sanctioned estimate

In case the drilled borewell is failed, the agency should completely close the drilled borewell and seal the top with cap in presence of AEE & Section Officer

The contractor should install casing pipe and mark the depth of water available after drilling of borewell and produce water yield certificate to concerned AEE & Section Officer

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Financial Status

ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 (a) Achieved in at least one financial years a minimum financial turnover (in all classes of civil engineering works only) of Rs.11.95 Lakhs

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹30,000

Important Dates

Last Activity

16 Jul 2026

Published

16 Jul 2026

Bid Opening

28 Jul 2026

Download Ends

23 Jul 2026

BOQ Preview

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore, plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest amendments, electrical resistance welded steel tubes, m...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary a...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments, 1x3x6 S...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm.

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analogy Ammeter, 1 No Analo...

•

Supplying and fixing HRC fuse units base on existing switch /panel board. 100 to 300 A.

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3phase, 400/440 Vgrade, for power factor improvement of rotating machineries like induction motor.

•

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Drilling rig Form 7A Order.pdf

Instructions to Tenderers • 0.83 MB

12350_kw1_Others.docx

Tender Document • 0.14 MB

borewell conditions.pdf

Instructions to Tenderers • 0.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].