SPL REPAIR TO BLDG NO P29 OFFCR LIVING ACCN,PROVN OF GENERATOR SHED OF INF BN,PROVN OF TOILET AND BATHROOM AT INF BN, PROVN OF OIL AND LUBE SHED WITH ALLIEDINFRA FOR COMPO PL AND PROVN OF OFFICE CUBICAL, PARTITION WALL TO BLDG T93 AT NAUGAM UNDER G

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil Complete all as specified and directed by Engineer-In-Charge.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-In-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape reqd incl cranking, bending spirally for hooping for columns hooking ends and binding with with and including mild steel wire not less than 0.90mm dia complete all as specified.

- ditto- all as per item No 3 above but 6mm to 8mm dia as in striups, spacers binders Complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter Complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions Complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides and soffits of lintel & lintel bend rough finish surface surface of concrete including supports, overhangs etc Complete all as specified and directed by Engineer-In-Charge.

M&L RCC 1:2:4 (20mm graded aggregate) for foundation, including rafts, footing plinth beam etc Complete all as specified and directed by Engineer-In-Charge.

M&L RCC 1:2:4 (20mm graded aggregate) for columns, pillars etc Complete all as specified and directed by Engineer-In-Charge.

M&L RCC 1:2:4 (20mm graded aggregate) for roof beams, lintels etc Complete all as specified and directed by Engineer-In-Charge.

M&L brickwork with sub class 'B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as directed by Engineer in Charge.

M&L for rendering 15 mm thick on stone masonry surfaces other than fair faces of brick work in cement mortar 1:6 Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement Complete all as specified and directed by Engineer-In-Charge.

Supply only water proofing compound (ISI Marked) Complete all as specified and directed by Engineer-In-Charge.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls Complete all as specified and directed by Engineer-In-Charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash Complete all as specified and directed by Engineer-In-Charge.

S & F Roof trusses (framed) trussed, Purlis, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle channel or flat sections) includign distance pieces, cleats etc conforming to Fe - 410-W (Gde- E-250) quality-A Complete all as specified and directed by Engineer-In-Charge.

S&F Pre- painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified Complete all as specified and directed by Engineer-In-Charge.

S&F Pre- painted galvalume plain aluminum zink coating GI based steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-In-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil Complete all as specified and directed by Engineer-In-Charge.

M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true Complete all as specified and directed by Engineer-In-Charge.

M & L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring Complete all as specified and directed by Engineer-In-Charge.

M & L for 100 mm thick Cement concrete type B-2, 1:2:4 (using 40 mm graded crushed stone aggregate) in hard standing/ path Complete all as specified and directed by Engineer-In-Charge.

Forming contraction dummy joint 65mm deep x 10mm wide filled with sealing compound of grade 'A' Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 50mm thick type C-2, 1:3:6 (20mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 & 3 parts of sand by weight Complete all as specified and directed by Engineer-In-Charge.

M&L 25mm thick sand cushioning laid with fine sand in floor or in foundation including watering and consolidation Complete all as specified and directed by Engineer-In-Charge.

M&L 20mm thick eaves board of 2nd class soft wood (kali), planed one side with butt joints, fixed with nails complete all as specified and directed by Engineer - in- Charge.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed by Engineer-In-Charge.

M&L 35mm thick, IInd class hard wood plain, framed, panelled shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc Complete all as specified and directed by Engineer-In-Charge.

S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates, hook and pintle hinges: large hasps and stapples , chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two ways and three ways straps, plate washers and similars small articles conforming to Fe-290 Gde E-165 Complete all as specified and directed by Engineer-In-Charge.

S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked Complete all as specified and directed by Engineer-In-Charge.

S&F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked Complete all as specified and directed by Engineer-In-Charge.

S&F Aluminium handles cast type anodised of size 150mm long ISI marked Complete all as specified and directed by Engineer-In-Charge.

M&L for IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each Complete all as specified and directed by Engineer-In-Charge.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane Complete all as specified and directed by Engineer-In-Charge.

Framed work such as grills, gratings, etc. with ends of bars shoulderse and / or revated or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings, framed of water tanks and similar works conforming to Fe 290. Gde E-165 Complete all as specified and directed by Engineer-In-Charge.

S&F 1.25mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated completete push pull or manual type Complete all as specified and directed by Engineer-In-Charge.

M&L brickwork with sub class 'B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:4 Complete all as specified and directed by Engineer-In-Charge.

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc Complete all as specified and directed by Engineer-In-Charge.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc Complete all as specified and directed by Engineer-In-Charge.

S&F plain cement concrete 1:2:4 Type B-1 (using 20mm graded aggregate ) as in coping and bond stone Complete all as specified and directed by Engineer-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils Complete all as specified and directed by Engineer-In-Charge.

Removing Excavated soils exceeding 500 M but not exceeding 1.5 KM and depositing where directed Complete all as specified and directed by Engineer-In-Charge.

Preparation of new previously untreated steel surfaces of any despcription, over 10 cm width or girth, otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer Complete all as specified and directed by Engineer-In-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) Complete all as specified and directed by Engineer-In-Charge.

Dismantling floor hearth wall tile incl cement mortar bedding, removing serviceable tiles to store and rubbish off the premises Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.50 sqm and n. exc 4.00 sqm .

Taking down shutter only exc 1.00 sqm but n.exc 2.00 Sqm each and refix in the same opening.

Dismantling boarding any description fixed in any position with nails Complete all as specified and directed by Engineer-In-Charge.

Demolition of brick work, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.

Dismantling of plain corrugated steel sheeting any guage thickness including Nainital or Similar pattern roof coverings (at any height) Complete all as specified and directed by Engineer-In-Charge.

Dismantling timber scantling under 40 Sqcm in section, as a fillets, rafter, purlins etc in any position unframed work Complete all as specified and directed by Engineer-In-Charge.

Dismantling timber scantling under 40 Sqcm over in section in any position unframed work Complete all as specified and directed by Engineer-In-Charge.

Taking down wall & ceiling boards/ wooden paneling of any description and thickness incl cover fillets complete Complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc Complete all as specified and directed by Engineer-In-Charge.

M&L Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring Complete all as specified and directed by Engineer-In-Charge.

M&L for non-skid coloured ceramic tile 7 to 8mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:6) Complete all as specified and directed by Engineer-In-Charge.

M&L for glazed ceramic tiles in vertical surface 450 x 350 x 7mm thick colour and design (as approved) in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15mm thick cement plaster using CM (1:4) Complete all as specified and directed by Engineer-In-Charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protecation finished even and smooth w/o using extra cement Complete all as specified and directed by Engineer-In-Charge.

M&L for pre-cast concrete rubber moulded glossy finished interlocking paver Block of 45mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete including with using grey cement and pigment any shape and size confirming to IS-15658-2006 Complete all as specified and directed by Engineer-In-Charge.

M&L for LLDPE septic tank, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 20 users Complete all as specified and directed by Engineer-In-Charge.

M&L for 4 mm thick veenered decorative plywood grade 1 with one side decorative face fixed with nails in walls to timber work including dismantling of wall board and cover fillets Complete all as specified and directed by Engineer-In-Charge.

S&F in repair for 4 mm thick veenered decorative plywood grade 1 with one side decorative face fixed with nails in ceiling to timber work Complete all as specified and directed by Engineer-In-Charge.

M&L 2nd class hard wood plain fillets square rectangularor triangular in section ,clean sawn section area exc 3 sq.cm not exc 6 Sqcm fixed with secured with nail or brads Complete all as specified and directed by Engineer-In-Charge.

M&L 2nd class hard wood in scantling clean swan timber framed and fixed to the position Complete all as specified and directed by Engineer-In-Charge.

S&F Harrison rails chromium plated 20 mm dia with fixing brackets, stops rollers etc in repair Complete all as specified and directed by Engineer-In-Charge.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks of galvanised wire staples Complete all as specified and directed by Engineer-In-Charge.

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out Complete all as specified and directed by Engineer-In-Charge.

S&F 35mm thick, 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of veneered particale board or plywood lock rail and panel of 12mm veneered particle board with commer or bison board Complete all as specified and directed by Engineer-In-Charge.

S&F Aluminium handles, cast type, anodised 125mm long Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 150 mm long Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed lenght of bolt 250mm Complete all as specified and directed by Engineer-In-Charge.

M&L for 2nd class soft wood fascia/boarding planned one side with butt joint 20 mm thick fixed complete as specified.

All as item No 75 above but fixing only clean swan boarding in repair Complete all as specified and directed by Engineer-In-Charge.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint Complete all as specified and directed by Engineer-In-Charge.

All as item No 77 above but one coat paint on old surface Complete all as specified and directed by Engineer-In-Charge.

Dismantling PVC water tank exc 500 Ltrs and n.exc 1000 Ltrs capacity

S&F Rotational moulded polyethyline water storage tank ( cylinrical vertical with close stop) hosted and fixed in position all as specified 500 Ltrs capacity Complete all as specified and directed by Engineer-In-Charge.

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs 20mm dia

S & F in repair vitreous china wash basin, white, flat back, size 550x400mm, plug , porcelain stopper and including brackets,Pedastal Type with waste fittings and connection pipe etc Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Pillar taps, 15mm dia cast copper alloy fency type, with capstan heads, chromium plated. Screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly nuts screwed for iron pipe & fixed etc Complete all as specified and directed by Engineer-In-Charge.

Preparing on new plastered surfaces and applying two coats of cement base paint on wall over a coat of white wash Complete all as specified and directed by Engineer-In-Charge.

Taking down steel tubing 15mm and connection including cleaning for refixing or removal to store Complete all as specified and directed by Engineer-In-Charge.

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore Complete all as specified and directed by Engineer-In-Charge.

Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore Complete all as specified and directed by Engineer-In-Charge.

Taking down steel tubing 20mm and connection including cleaning for refixing or removal to store Complete all as specified and directed by Engineer-In-Charge.

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore Complete all as specified and directed by Engineer-In-Charge.

S&F for 15 mm bore in repair long nose bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule and fixed Complete all as specified and directed by Engineer-In-Charge.

S & F in repair stop valves/angle valve concealled fancy type chromium plated screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore and fixed Complete all as specified and directed by Engineer-In-Charge.

S & F in repair 20mm stop valves cast copper alloy chromium plated screwed down high pressure , with cruth or butterfly handle screwed both end for iron pipe

S & F grating doom 100 mm dia of PTMT Complete all as specified and directed by Engineer-In-Charge.

S&F in repair PVC (SWR ) pipes 150mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor Complete all as specified and directed by Engineer-In-Charge.

S&F in repair PVC (SWR ) pipes 75mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) bends 150mm dia fixed Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) bends 110mm dia provided with access door Complete all as specified and directed by Engineer-In-Charge.

S&F shelf of PTMT fixed with and including brackets and screws complete in repairs Complete all as specified and directed by Engineer-In-Charge.

S&F in repair swivel shower of PTMT any colour to fix with 15 mm dia pipe with shower arm revolving and flange Complete all as specified and directed by Engineer-In-Charge.

S&F PVC flushing cistern, 10 Litres capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs Complete all as specified and directed by Engineer-In-Charge.

S&F in repair vitreous china wash down water closet pan European type, white including seat cover providing plugs ,bedding in cement mortar 1:2 ,securing and waste fittings and connection pipe etc, pointing around Complete all as specified and directed by Engineer-In-Charge.

S&F chromium plated connection pipe fency type 450mm long at size 15mm bore with standard PTMT nut fixed to GI tubbing all as directed.

S&F brass chromium plated tublar Towel Rail 20mm dia, 60cm long including side brackets complete in repairs Complete all as specified and directed by Engineer-In-Charge.

S&F in repair Health faucet (CP) with 8 mm dia 1 mtr long flexible tube with wall hook Complete all as specified and directed by Engineer-In-Charge.[Make : Jaquar cat No ALD 573.]

M&L for preperation wood and wooden based surfaces new or old of any description and girth using creosote oil complete all as directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 Complete all as specified and directed by Engineer-In-Charge.

M&L for walling of random rubble masonry built in CM 1:6 brought up to courses Complete all as specified and directed by Engineer-In-Charge.

Extra over hammer dressing to face stone and dressing of face beds with manimum depression on face from straight edge Complete all as specified and directed by Engineer-In-Charge.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium handles cast type anodised of size 100mm long ISI marked Complete all as specified and directed by Engineer-In-Charge.

M & L for 0.63mm thick galvanised corrugated or semi-corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating in roofing fixed with new J-hooks/L-hooks/cranked hook bolts etc Complete all as specified and directed by Engineer-In-Charge.

M & L for 0.80mm thick plain Galvanised mild steel sheeting, in ridges, hips, fascia boarding, valley gutters, drip and straight flashings (length and girth as fixed with grade of zinc coating fixed with new J-hooks/L-hooks/cranked hook bolts etc Complete all as specified and directed by Engineer-In-Charge.

S&F Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , Complete all as specified and directed by Engineer-In-Charge.

S&F PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed, Complete all as specified and directed by Engineer-In-Charge.

S&F Wash basins, Vitreous China (flat back or angle back type) size 550x400mm, including pillar tap, waste fitting chromimum plated brass and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc fixed Complete all as specified and directed by Engineer-In-Charge.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (Back or cornal wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 and including 60mm long brass screws pointing around urinal (excluding flushing cistern, flush pipe) Complete all as specified and directed by Engineer-In-Charge.

S&F Tubular towel rail aluminum anodised 20mm dia D-type 60cm long between flanges including brackets and fixed to walls Complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore of pipe Complete all as specified and directed by Engineer-In-Charge.

ditto all as per item no.120 but 110 mm bore of pipe Complete all as specified and directed by Engineer-In-Charge.

S&F 75mm bore PVC bends of any type Complete all as specified and directed by Engineer-In-Charge.

ditto all as per item no122 but 110 mm bore Complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore Complete all as specified and directed by Engineer-In-Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floor and beams, etc in rough finished surface of concrete Complete all as specified and directed by Engineer-In-Charge.

Surface dressing n.exc 15 cm deep in Hard/dense soil Complete all as specified and directed by Engineer-In-Charge.

M&L for100mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and smooth without using extra cement Complete all as specified and directed by Engineer-In-Charge.

M&L for Reinforced cement concrete type A1 1:1/2:3 (usingg 20mm graded aggregate ) at any place as directed Complete all as specified and directed by Engineer-In-Charge.

S&F standard aluminium Anodised section as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning, and fixed in position with stainless steel screws Complete all as specified and directed by Engineer-In-Charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. Complete all as specified and directed by Engineer-In-Charge.

S&F 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work Complete all as specified and directed by Engineer-In-Charge.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per direction

M&L for 18 mm prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber work Complete all as specified and directed by Engineer-In-Charge. .

M&L 2nd class hard wood plain fillets square rectangularor triangular in section ,clean sawn section area exc 6 sq.cm not exc 13 Sqcm fixed with secured with nail or brads Complete all as specified and directed by Engineer-In-Charge.

M&L 2nd class soft wood plain fillets square rectangularor triangular in section ,clean sawn section area not exc 3 Sqcm fixed with secured with nail or brads Complete all as specified and directed by Engineer-In-Charge.

S&F Butt Hinges extruded alluminium alloy Anodised type B-21of size 100 mm Complete all as specified and directed by Engineer-In-Charge.

S&F Mortise lock vertical type 4 lever Brass, size 100 mm mild steel Complete all as specified and directed by Engineer-In-Charge.

Supply and fix electric storage water heater of capacity 25 litres BEE 5, 240 volts star rated, white greay in colour complete all as specified and as directed by Engr-in-Charge. Make : Havells cat Part No. GHWASESWH025 or equivalent in Usha/Bajaj/Crompton

S&F for stop valves cast copper alloy screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions and fixed for fancy type chromium plated for bor dia of 20mm Complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body Complete all as specified and directed by Engineer-In-Charge.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface Complete all as specified and directed by Engineer-In-Charge.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for light and fan point. Following:-

(a) M&L One light/bell/Fan / 5Amp Same board point controlled by one switch Complete all as specified and directed by Engineer-In-Charge.

(b) M&L One switch socket combination 5 Amps on independent board Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 144 herein before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.

S&F Switch socket combination flush type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch Complete all as specified and directed by Engineer-In-Charge.

S & F Switch socket combination multipurpose 5 pin/15 Amps flush type Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing LED luminarie 18 watt Basic all purpose surface all mounted LED batten with polycarbonate housing and integrated electronic driver of 1x18W ,Code No-LUMILINEBS18WLED830SPCWH Make : Havells

S&F in repair Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing only LED lamp 15 watts Complete all as specified and directed by Engineer-In-Charge

Supply and fixing 18 watt Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling Complete all as specified and directed by Engineer-In-Charge.Make : Havells ,Cat Part No-VENUSNEOHE2X2PLR18WLED8XXS

Supply and fixing 15 watt Recess mounted pressure die-cast aluminium luminaire in powder coated white finish with drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver Complete all as specified and directed by Engineer-In-Charge..Make : Havells ,Cat Part No-RISEDLR15WLED830S

Supply & fixing exhaust fan Heavy Duty AC single phase 230/ 240 V of size 300 mm sweep 1400 RPM with louver Complete all as specified and directed by Engineer-In-Charge.s

Supply and fixing One bell/buzzer pointcontrolled byone push button on the same board with other switches or dependent with cables 1.5 sq.mm size Supply & fixing exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver Complete all as specified and directed by Engineer-In-Charge.

S & F Bell push, flush type, 5 ampSupply & fixing exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver Complete all as specified and directed by Engineer-In-Charge.

S&F Envriomen friendly,Ultra Modern,Energy Saving ,Surface Mounted ,Decorative LED Bulk head 10w luminairesComplete all as specified and directed by Engineer-In-Charge.

M & L Sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RMComplete all as specified and directed by Engineer-In-Charge.

S & F in repairs MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engineer-In-Charge.. (Make:- Schneider as per cat part- NBKRESNDD08 or equivalent in Havell's or Standard)

S & F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Make:- Schneider as per cat part- NBKRESNDD08 or equivalent in Havell's or Standard)

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's Complete all as specified and directed by Engineer-In-Charge.. (Make:- Schneider as per cat part- C60H1P16AB or equivalent in Havell's or Standard, C&S)

Supply and fix in repairs MCB, single pole and neutral link 240 volts 6 to 30 Amps capacity fixed in DB'sComplete all as specified and directed by Engineer-In-Charge.. (Make:- Schneider as per cat part- C60H1P16AB or equivalent in Havell's or Standard, C&S)

M&L for XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade of cross sectional area 16 sq. mm 2 coreComplete all as specified and directed by Engineer-In-Charge..

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 mtr deep in depth for laying of cable and foundation of poles, stays and getting out in any type of soil complete all as specified and directed by engr in charge.

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point all as directed.

M&L for soakage well excavation in hard/dense soil, foundation in PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) walls of stone honey combed solid masonry in cement mortar 1:4 with top ring of RCC M-30 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M-30/SFRC Cover, interconnecting pipes of RCC/DWC complete with brick bats of size 1.2m dia and 3.0m efective depth,Complete all as specified and directed by Engineer-In-Charge.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed Complete all as specified and directed by Engineer-In-Charge.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified and directed by engr in chargeComplete all as specified and directed by Engineer-In-Charge.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

Cutting existing steel tubing 25 mm dia for alterations or additions (Each cut measured) Complete all as specified and directed by Engineer-In-Charge.

Screwing existing steel tubing 25 mm dia for alterations or additions (or lengthening screw on pipe to form connector) and joining of tee 25/20mm Complete all as specified and directed by Engineer-In-Charge.

S&F 15mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe Complete all as specified and directed by Engineer-In-Charge.

S&F 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe Complete all as specified and directed by Engineer-In-Charge.

M&L for lagging on 15mm internal dia pipe all round with 25 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh etc Complete all as specified and directed by Engineer-In-Charge.

M&L for lagging on 20mm internal dia pipe all round with 25 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh etc Complete all as specified and directed by Engineer-In-Charge.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position Complete all as specified and directed by Engineer-In-Charge.

S&F RCC pipes 150 mm internal dia class NP3 laid in trenches and jointed. Complete all as specified and directed by Engineer-In-Charge.

M/S HAJI MOHD ASHRAF SUMJI