REPAIR/MAINT OF INTERNAL/EXTERNAL ELECTRIFICATION SYSTEM AND OTHER CONNECTED WORKS AND FIRE FIGHTING EQPT PIPE LINE AND ALLIED WORKS AND SUBMERSIBLE PUMP WATER SUPPLY INSTALLATION AT PRABHU VIHAR (PCDA) DEVI KHERA UNDER GE E/M LUCKNOW

Amount

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed by Engineer-in-Charge

Taking down shutter only n. exc 1.0 sqm each complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed by Engineer-in-Charge

S & F IInd Cl H/W plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge

S&F mild steel work as in hold fasts and similar articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specn & drg complete all as specified and directed by Engineer-in-Charge

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with complete all as specified and directed by Engineer-in-Charge

M&L glazed and skeleton shuitters 30m thick of 2nd class hard wood open rebated and prepared to receive glass, gauage etc(with sash bars) in door, window, ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded fitted with cut complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B21 complete all as specified and directed by Engineer-in-Charge

S&F continuous (piona) hinges, mild steel bright finish or electrogalvanised 30mm wide complete all as specified and directed by Engineer-in-Charge .

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed by Engineer-in-Charge

M&L for preparing of new previously untreated surfaces of wood or wood based material over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed by Engineer-in-Charge

Demoltion of brick work built in cement mortar complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for foundation,etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Removing excavated materials n exc 50 m and depositing where directed at a level n'exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:4:8 type -D2 using 40mm graded stone aggregate in filling and mass concrete complete all as specified and directed by Engineer-in-Charge

M&L for brick work with fly ash bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

M&L for RCC Jallies 1:2:4 type B0 set in CM1:4 including moulding complete all as specified and directed by Engineer-in-Charge

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge

S&F for 6 to 8 mm TMT bar including cranking, bending, binding with M S annealed wire not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engineer-in-Charge

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even complete all as specified and directed by Engineer-in-Charge

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge (Note : Integral WPC shall be measured and paid seprately )

Supply only integral WPC of approved quality complete all as specified and directed by Engineer-in-Charge

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified and directed by Engineer-in-Charge

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash complete all as specified and directed by Engineer-in-Charge

Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal existing treatment incl preparing unplastered old surfaced and distempering walls with two coats of oil bound distemper white or tinted over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified and directed by Engineer-in-Charge

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying two coat of cement base paint of any tint/shade complete all as specified and directed by Engineer-in-Charge

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

M&L applying one coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore complete all as specified and directed by Engineer-in-Charge

S & F 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge

S & F 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge

Demolition of floor hearth or wall tiling including cement mortar bedding (But not backing) removeing serviceable tiles to store and rubbishoff the premishes complete all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed complete all as specified and directed by Engineer-in-Charge (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding complete all as specified and directed by Engineer-in-Charge (Note : Screed bed will not be measured and paid separately)

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 complete all as specified and directed by Engineer-in-Charge (Note : Screed bed will not be measured and paid separately)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified and directed by Engineer-in-Charge.(Floor door springs where renewed shall be measured and paid separately under appropriate items.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed. complete all as specified and directed by Engineer-in-Charge

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and directed by Engineer-in-Charge

S&F Powder coated Aluminium sections ( conforming to IS) door frames with double leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 2 Nos, 100mm aluminium hinges 4 Nos per shutter, Handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and directed by Engineer-in-Charge

S&F Powder coated Aluminium sections ( conforming to IS) door frames with single leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 1 Nos, 100mm aluminium hinges 4 Nos per shutter, Handle 2 Nos in each shutter Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and directed by Engineer-in-Charge

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe) complete all as specified and directed by Engineer-in-Charge

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed by Engineer-in-Charge

S&F in repairs CP Angle stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified and directed by Engineer-in-Charge

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet Cat No.20012, white) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete all as specified and directed by Engineer-in-Charge

S&F in repairs VC WHITE Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphon complete all as specified and directed by Engineer-in-Charge

S&F in repairs Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge

S&F for fixed in repair brass CP Wall mixer complete all as specified and directed by Engineer-in-Charge

S&F for fixed in repair single lever brass CP basin mixer complete all as specified and directed by Engineer-in-Charge

S&F in repair toilet paper holder brass CP complete all as specified and directed by Engineer-in-Charge

S&F in repair health faucet brass CP with 15 mm dia flexible pipenot less than 900 mm long equivalent complete all as specified and directed by Engineer-in-Charge

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting complete all as specified and directed by Engineer-in-Charge

Supply only 32mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed by Engineer-in-Charge

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed by Engineer-in-Charge

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

S &F door seal with aluminium 20 x 1.5 mm strips with wool complete all as specified and directed by Engineer-in-Charge

Taking down pipes (any sizes) incl all fittings complete all as specified and directed by Engineer-in-Charge

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed by Engineer-in-Charge

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge

All as per item No 89 here-in-before but dia of 75mm

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge

S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed by Engineer-in-Charge

All as per item No 92 here-in-before but dia of 75mm

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge

All as per item No 94 here-in-before but dia of 75mm

Dismantling water tank capacity exc 500 & n.exc 1000 ltr and taken as credit complete all as specified and directed by Engineer-in-Charge

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed by Engineer-in-Charge

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified and directed by Engineer-in-Charge

S & F in repair of PVC coated drapery rod of 20mm dia complete all as specified and directed by Engineer-in-Charge

S & F brass coated knob at both ends of drapery rod of 20mm dia complete all as specified and directed by Engineer-in-Charge

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed by Engineer-in-Charge (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL)

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed by Engineer-in-Charge (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL)

Temporarily blocking of sewage line with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed by Engineer-in-Charge for 150 mm bore

All as per item No 103 above but 200 mm bore

All as per item No 103 above but 250 mm bore

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed by Engineer-in-Charge

M & L for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 fixed in repair complete all as specified and directed by Engineer-in-Charge

M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40mm thick sand layer including filled interstices complete all as specified and directed by Engineer-in-Charge

M & L for cement concrete type D 2, 1:4:8 (40mm graded aggregate) 75 mm thick as in sub base of floor complete all as specified and directed by Engineer-in-Charge

S&F for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws and hinges to timber frame work or to brick wall complete all as specified and directed by Engineer-in-Charge

Overhauling, Oiling, Greasing and servicing of Air blower of any capacity by Opening of all parts , suction air filter ,bush ,bearing , rotor ,drum , bearing of motor shaft ,Neck ring, coupling with studs between motor & air blower ,& all other parts and re-assemble the same after greasing , oiling complete all as specified and directed by Engineer-in-Charge ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Overhauling and servicing of Air blower should be carried out by Auth company or dealer Which is specialist of above .)

Labour for taking out unserviceable raw non clog submersible type raw effluent sewage lifting Submersible pump set of capacity upto 10 HP of rating 3 phase 440 Volts supply from raw sewage collection sump of STP plant well upto 15 mtr depth at any location for overhauling, Oiling,Greasing and servicing of capacity up to 10 HP by Opening of all parts , bush ,bearing , rotor ,drum , bearing of motor shaft ,Neck ring, coupling with studs between motor & all other parts and re-assemble the same after greasing , oiling of and shifting the same to authorised workshop for repair , testing and re-installation/Re-fixing/lowering in the sewage sump complete all as specified and directed by Engineer-in-Charge ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Overhauling and servicing of non clog submersible Pump should be carried out by Auth company or dealer Which is specialist of above .)

Attend the day to day complaint of non functing part to Air Blower , Air Blower Motor ,non clog submersible Pump, motor and all connected parts complete all as specified and directed by Engineer-in-Charge ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Complaint Should be attend immediately within two hrs & Rectified the same day at the earliest without effecting of service .)

M & L for Cleaning of sewage line, man holes, septic tanks and soakage wells by providing all tools & plants including bamboos, buckets, ropes etc. (Contractor provide 2 Nos safaiwala to get it sewage complaiants which is received day to day by sub division.Note : Any complaints which is not completed with two days from the date of issue of complaint, compensation will be charged Rs 400/- per day in addition to above. Every additonal day delay will be charged Rs 100/-.

Material and labour for taking out the silt & foreign object , Cleaning & Removing sludge from course bar screen including all chamber of equilasation tank upto depth of maxium15 Mtr any capacity STP as per direction by EIC complete with tools and plants as required at site and safe disposed off at place not more than 1.5 KM away at such a place which is not determental to public health. complete all as specified and directed by Engineer-in-Charge. Note : Sludge will be measured and paid after pumping pf pumpable sewage water as required and rate for the same shall be included in the above item.

Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from Fine bar screen ,Oil & Grease Chamber complete with all as specified & direction by EIC complete with tools and plants as required at site and safe disposed off at place not more than 1.5 KM away at such a place which is not determental to public health complete all as specified and directed by Engineer-in-Charge.Note : Sludge will be measured and paid after pumping pf pumpable sewage water as required and rate for the same shall be included in the above item..

Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from MBBR I & II Chamber complete with complete all as specified and directed by Engineer-in-Charge

Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from Tube Setteler Chamber complete all as specified and directed by Engineer-in-Charge

Supply and fix Plastic Media MBBR (Media) as per existing size & specification of IS complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair of bubble diffuser as per existing specified size complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Pac media in tube settler tank as per existing specified size complete all as specified and directed by Engineer-in-Charge

Replacement of filter media of sludge drying bed as per specification laid specification of IS , complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair of distribution box at equilistion well complete all as specified and directed by Engineer-in-Charge

M & L for preparation replacement of MS gate of oil & Greece chamber and sludge drying bedas per existing specified size , complete all as specified and directed by Engineer-in-Charge

M & L for repair of old M S pipe/angles of any description in any width or girth for complete one STP and applying two coats of epoxy paint with one coat of primer complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair of pressure gauge o to 7 Kg/cm2 complete all as specified and directed by Engineer-in-Charge

Material and Labour for taking out /dismantling of Air blower pump/Fire fitting motor / water supply motorset of rating 3 phase 440 Volts of capacity upto12.5 HP from plat at any location and shifting the same to contractor's workshop for repair and re-installation/refixing the same at its original site and testing complete all as specified and directed by Engineer-in-Charge

Cutting out the existing winding of the motor, opening of winding, re-winding of motor with same size of rewinding with super enamelled copper winding including tapping, varnishing, baking and furnishing with the insulating sleeve and making connection complete all as specified and directed by Engineer-in-Charge

Repairing of pump by re-threading of worn out studs holes and supply and fixing over size studs with nut and washer complete all as specified and directed by Engineer-in-Charge

Repairing of pump shaft by depositing metal on it by breazing, grinding and polishing to appropriate size of the shaft complete all as specified and directed by Engineer-in-Charge

Supply and fixing gun metal/stainless steel bush of pump shaft complete all as specified and directed by Engineer-in-Charge

Supply and fixing driven end bearing of blower shaft complete all as specified and directed by Engineer-in-Charge

Supply and fixing end bearing of blower shaft complete all as specified and directed by Engineer-in-Charge

Supply and fixing gland and packing complete all as specified and directed by Engineer-in-Charge

Supply and fixing coupling with studs between motor & air blower complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement suction air filter complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of suction silencer complete all as specified and directed by Engineer-in-Charge

Supply and fixing Neck ring complete all as specified and directed by Engineer-in-Charge

Supply and fixing bearing of motor shaft complete all as specified and directed by Engineer-in-Charge

Material and Labour for taking out unserviceable/burnt raw non clog submersible type raw effluent sewage lifting Submersible pump set of capacity upto 10 HP of rating 3 phase 440 Volts supply from raw sewage collection sump of STP plant at any location and shifting the same to authorised workshop for repair and re-installation/Re-fixing/lowering in the sewage sump complete all as specified and directed by Engineer-in-Charge (Parts renewed shall be measured and paid separately under appropriate items) listed here below :-

Cutting out the existing winding of stator of submersible motor of any make and rewinding with water proof copper winding wire of appropriate guage as existing complete all as specified and directed by Engineer-in-Charge

Straightening of the slots of stator of submersible motor of any make.

Supply and fixing thrust bearing block complete of submersible pump of any make.

Supply and fixing gun metal bushes for submersible motor as per manufacturer's design and specification.

Supply and fixing sand guard of submersible motor.

Supply and fixing of bronze metal impellars

Supply and fixing of shaft sleeve

Supply and fixing of set of gasket and O-ring

Supply and fixing of Mechanical seal motor end.

Supply and fixing of Mechanical seal pump end

Supply and fixing deep groove ball bearing motor side

Supply and fixing groove ball bearing pump side

Supply and fixing pump casing

Supply and fixing of intermediate casing

Supply and fixing of bearing housing

Supply and fixing of bearing cover

Supply and fixing of shaft protection sleeve

Supply and fixing of bowl, cast iron

Supply and fixing of bearing sleeve complete

Supply and fixing of rotor

Supply and fixing of cable assembly

Supply and fixing in replacement mild steel Nuts , bolt and washer ,hexagonal full threaded ,12 mm dia 100 mm long complete all as specified and directed by Engineer-in-Charge

Supply & filling of new Gear Oil Grade G-90 for Air Blower complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs air blower pulley as per sample complete all as specified and directed by Engineer-in-Charge

Strip opening of air blower and cleaning of air filters and air silencers with required material/liquid shop complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs three phase DOL starter with single phase preventor, MCB TPN 32 Amps 'C' Series, Voltmeter, ammeter and indication piolet lamps for three phase i.e. R.Y.B, having provision for mauanl by pass and suitable for operating submersible pumps sets/blower motors upto 10 HP capacity complete all as specified and directed by Engineer-in-Charge

Supplying, laying or fixing, jointing and testing LT underground electric power cable, crossed linked polyethylene (XLPE cable) insulated, two or more core, galvanised steel strip or wire armoured, ISI-7098 Marked with aluminium conductor multistranded, heavy duty 11000 volts grade of following sizes complete all as specified and laid in trenches/laid under floor or fixed naked with walls/on poles/in ducts/ in GI pipes 16 Sqmm 4 Core etc. complete all as specified and directed by Engineer-in-Charge (Excavation, earth work, sand cushioning, protection bricks/ tiles/block, clamps, nuts, bolts, washers and pipe shall be measured and paid separately under appropriate items) :-

All as per item No 168 above but 10 Sqmm 4 Core

Supply & Fixing Flat type submersible cable PVC insulated and PVC sheathed conductor 10 Sqmm 3 core 1100 Volts grade, flat cable conforming to IS-694:1977 complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 2.5 to 4 Amps of make - Siemens or any other specified make complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 6 to 10 Amps of make - Siemens or any other specified make complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 10 to 20 Amps of make - Siemens or any other specified make complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs power contactor ML-3, 3 Phase, 415 Volts current carrying capacity 4 to 25 Amps, coil voltage 220 volts, 50 Hz of make L&T or equivalent of other specified make complete all as specified and directed by Engineer-in-Charge

Supply & Fixing in repairs MCB TPN 32 Amps, 440V AC 'C' series ISI Marked. complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs push button type illuminated actuators flush with neon lamp (Red Colour) & suitable for operation with 415Volts, AC complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs LED type piolet indicator lamps (Red colour) with integral circuit suitable for operating at 240V, AC complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs LED type piolet indicator lamps (Green colour) with integral circuit suitable for operating at 240V, AC complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs LED type piolet indicator lamps (Yellow colour) with integral circuit suitable for operating at 240V, AC complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs Single Phase preventor to prevent single phasing , reverse phasing wiring & testing complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair Digital Ampere meter ISI Marked suitable for (0-400Amps) range three phase AC Supply, current ratio 150/5A. complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs Voltmeter moving coil type suitable for voltage range 0-500 Volts for three phase AC system. complete all as specified and directed by Engineer-in-Charge

MCCB 4 Pole, current rating 100 Amps, thermal & magnetic setting adjustable 70%-100% breaking capacity 10kA at 415V,50Hz complete all as specified and directed by Engineer-in-Charge

MCCB 4 Pole, current rating 160 Amps, thermal & magnetic setting adjustable 70%-100% breaking capacity 16kA at 415V,50Hz complete all as specified and directed by Engineer-in-Charge

M & L for earthing complete with GI earth plate 60cm x 60cm x 3 mm thick buried directly in ground/ earth pit not less than 2.25M below ground level with top edge of the plate not less than 1.5M below ground level connected to GI earth wire protected by GI pipe i.e. light grade 25 mm dia all as shown in electric plate No.5 of MES SSR Part I connected to earthing test point, testing complete including necessary earth pit PCC 1: 3: 6 chamber and 50mm thick PCC 1 : 2: 4 chamber cover and with 6mm dia mild steel re-enforcement of 10Cm C/L spacing both ways in lieu of CI cover refilling of soil etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing, testing and commissioning of Mild Steel pipes 15 mm dia, Medium grade in any length, conforming to IS:1239(I) with flanged ends including fittings (Bend, Elbow, Tee, etc) and laid in trenches/fixing on wall/floors including painting with two coats of synthetic enamel paint of existing tint/colour complete all as specified and directed by Engineer-in-Charge, (Note- Rubber gasket joints shall be measured and paid separately)

All as per item No 187 above but 25 mm dia

All as per item No 187 above but 40 mm dia

All as per item No 187 above but 50 mm dia

All as per item No 187 above but 80 mm dia

All as per item No 187 above but 100 mm dia

Material and labour for Rubber or fibre board gasket joint 3mm thick (packing ring), including provision of suitable size bolts, nuts & washers for 80 mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

All as per item No 193 above but 100 mm bore

All as per item No 193 above but 150 mm bore

All as per item No 193 above but 200 mm bore

Supply and fixing in repairs Brass Handle valve (wafer type) lever operated class PN-1.0, S.S-304 Disc, Nitrile/EPDM rubber lining including making new flanged joint with 3mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer suitable for 25 mm dia complete all as specified and directed by Engineer-in-Charge. Make : Zoloto/Kirloskar

All as per item No 197 above but 32 mm dia

All as per item No 197 above but 50 mm dia

All as per item No 197 above but 80 mm dia

Supply and fixing in repairs non return valve , CI of required dia 100 mm complete all as specified and directed by Engineer-in-Charge.

M & L for construction of valves pit chamber using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS frame including 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame out of 40 x 40 x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coat including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and including demolition/dismantling of existing cracked valve chamber of 900 mm x 900 mm x 900 mm complete all as specified and directed by Engineer-in-Charge.

All as per item No 202 above but 1200 mm x 1200 mm x 1000 mm

Supply and fixing in repairs pressure guage analog type suitable for pressure range 0 to 10 Kg/Cm2 complete all as specified and directed by Engineer-in-Charge.

Material and labour for painting of existing exposed iron surfaces/pipes/iron gate etc with two coats of synthetic enamel paint (colour to be decided by EIC) over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S & Fixing Submerssible sewage pump 2 HP 1.5 KW , 220 V AC 50 Hz Discharge 15.56 LPS complete all as specified and directed by Engineer-in-Charge. Make Crompton Model No- STPM 22 ( 1PH) or equivalent KSB/Kirloskar/Jyoti/Shakti

S & Fixing Hose pipe for fire fiting of 100 MM complete all as specified and directed by Engineer-in-Charge.

Labour only for grass/bushes cutting and complete cleaning surrounding the pump houses/water supply installatiions at different locations in cantt area in entire period for periodicity of atleast one time in every month to each installation complete all as specified and directed by Engineer-in-Charge. Note :- Cutting of grass/bushes shall be done at least once in a month for each installation and shall be measured one time only for payment purpose in entire contract period.

Supply of liquid clorine sodium hypochlorite ( Grade - I ) drinking water with 9 % clorine contents by volume confirming to IS-11673 in seald non chemicale re-actined / oxidation LDPE Container of 40 Kg PVC tank with manufacture clorine test certificate and manufacture date mark not more than 02 week ago as required on monthly basis complete all as specified and directed . Make :- M/S Grasim Industris Ltd ( chemical division ) New delhi or other equilent complete all as specified and directed by Engineer-in-Charge..Note : - The Contractor shall arrange for independent testing for clorine contents from any Govt analysist / CHCC lab / Lan Nigam at own cost and shall be produced along with their claim for Payment .

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed by Engineer-in-Charge

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed by Engineer-in-Charge

Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 100 mm bore complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Galvanised mild steel pipe /tubing, of size 40 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed by Engineer-in-Charge

Taking out old unsv/ faulty LT under ground cable of any size and capacity and deposited the same in MES store yard complete all as specified and directed by Engineer-in-Charge

Supplying and laying or fixing in replacement, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed by Engineer-in-Charge Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per item No 215 above but of size 16 Sqmm 2 core

All as per item No 215 above but of size 25 Sqmm 4 core

All as per item No 215 above but of size 50 Sqmm 3.5 core

Laying only old serviceable LT underground cable after removing of defects any type/size in trenches / road crossing /through pipes pat drains/ducts/floors/along poles/walls/ceilings complete including excavation, earth work, sand cushioning, protection bricks and pipe complete all as specified and directed by Engineer-in-Charge

Supply & Fixing flat twin core , 4 sqmm nominal cross sectional area solid aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified and directed by Engineer-in-Charge

Supply & Fixing twin core , 6 sqmm nominal cross sectional area solid aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified and directed by Engineer-in-Charge

Supply & Fixing twin core, 10 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed including M& L PVC 32 mmrigid non metallic PVC conduit welded exclusive of junction & terminal boxes but inclusive of all fitting such as elblow, reducer, bell mouth tube end & all fixing accessories such as coupler, lock nut, saddle, pipe Hooketc complete for connecting wire/Cable complete all as specified and directed by Engineer-in-Charge

Taking down carefully the defective street light HPSV/HPMV fittings from the poles /walls complete all as specified and directed by Engineer-in-Charge

S&F LED street light 60 Watt made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP 66 protection fixed on street light pole complete all as specified and directed by Engineer-in-Charge Make: Havells Cat No- ENDURAPEARLPLUSSL60WLED757SASYTOPC or equivalent in Bajaj/Crompton Greaves/Wipro.

Dismantling and S&F garden light fitting with cast aluminium finished with stove enmeled paint & transparen acrylic covers complete with two pin ABS holder including LED Lamp 12 watt and mounting on and including 40 mm dia GI pipe medium grade (1.5 Mtr) with MCB DB SPN Box incl MCB SPN 32 amps rating incl all necessary electric connection, including GI pipe grouting with PCC 1:3:6 type C1 using 20mm graded stone aggregates incl necessary earth work etccomplete all as specified and directed by Engineer-in-Charge Make- Mepro Electrical Cat No- PTL-260 or equivalant Bajaj/Phillips/CG/Havells

Dismantling and S&F gate light fitting with cast aluminium finished with stove enmeled paint & transparen acrylic covers complete with two pin ABS holder including LED Lamp 25 watt and mounting on 40 mm dia GI pipe with MCB DB SPN Box incl MCB SPN 32 amps rating incl all necessary electric connection complete all as specified and directed by Engineer-in-Charge Make- Mepro Electrical Cat No- PTL-280 or equivalant Bajaj/Phillips/CG/Havells

S&F powder coated Mild steel junction box of size 300x300x150mm, of CRCA sheet 1.6mm minimum thick with front openable hinged door, locking arrangements with 4 Nos Aluminium bus bars , 100 Amps, mounted on porcelain insulator, glands and lugs etc. including S&F MCB , SP, 10 Amps, 10 kA, and fixed on box in DIN rail , fix to pole with suitable size of FI clamps, nuts , bolts and washers complete with and including S&F required size and length of copper conductor cable and making connections complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement GI brackets made of 40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zn chrome primer and fixed to pole / walls etc complete all as specified and directed by Engineer-in-Charge

Hiring of cable fault detector, to detect exact position of fault for XLPE /PVC LT/HT cable, 1100/11000 Volts grade heavy duty aluminium conductor of any size including to and fro transporting charges etc. complete all as specified and directed by Engineer-in-Charge

S&F in repair of Astro Digital time switch 24 hours of 07 days time setting having longitudional and latitude in memory with 28 memory location and 06 year battery backup and one change over contact of make Indoasian Cat ref No TDA45194 or equilant of other specified make complete all as specified and directed by Engineer-in-Charge

Supplying & fixing in repair, connecting , testing and commisioning MCCB in panels etc. MCCB 100 Amps, 3 pole, 16 KA , 415 volts 50 HZ, complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat No- IHLGNT0100# or equivalent in ABB/C&S/Legrand

Supplying & fixing in repair, connecting , testing and commisioning MCCB in panels etc. MCCB 125 Amps, 3 pole, 16 KA , 415 volts 50 HZ complete all as specified and directed by Engineer-in-Charge.Make: Havells Cat No- IHLGNT0125# or equivalent in ABB/C&S/Legrand

Supplying & fixing in repair, connecting , testing and commisioning MCCB in panels etc. MCCB 160 Amps, 3 pole, 35 KA , 415 volts 50 HZ complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat No-IHLFNT0160# or equivalent in ABB/C&S/Legrand

Supplying & fixing in repair, connecting , testing and commisioning MCCB in panels etc. MCCB 200 Amps, 3 pole, 35 KA , 415 volts 50 HZ complete all as specified and directed by Engineer-in-Charge.Make: Havells Cat No-IHLFNT0200# or equivalent in ABB/C&S/Legrand

Supplying & fixing in repair, connecting , testing and commisioning MCCB in panels etc. MCCB 250 Amps, 4 pole, 36 KA , 415 volts 50 HZ complete all as specified and directed by Engineer-in-Charge.Make: Havells Cat No-IHLFNF0250# or equivalent in ABB/C&S/Legrand

Supply & fixing in replacement Isolator 100 Amp Amps, 4 pole, 10 KA , 415 volts complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement Isolator 100 Amp Amps, 3 pole, 10 KA , 415 volts complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement Isolator 63 Amp Amps, 4 pole, 10 KA , 415 volts complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement Isolator 63 Amp Amps, 3 pole, 10 KA , 415 volts complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement Isolator 32/4 Amp Amps, DP, 10 KA , 240 volts complete all as specified and directed by Engineer-in-Charge

Supplying & fixing in replacement MCB 6-32 Amp Amps, SP, 10 KA , 240 volts complete all as specified and directed by Engineer-in-Charge

M & L Construction of Shead 3 x3 x 2.5 mtr Hut shape with XPM fencing with weight not less than 4 kg/Sqm and angle iron 50 x50 x6 mm for support gate with locking arrangement PCC including excavation earth work , painting of fencing and frame work with primer coat and two coat of enamel paint complete all as specified and directed by Engineer-in-Charge

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Disconnecting the existing cable from Panel / Pole, preparing the end for jointing including all earth work, Supply and fixing Cable end termination including sleeves heat shrinkable joint suitable for LT XLPE cable of size 3.5 core 16 to 50 sq mm complete all as specified and directed by Engineer-in-Charge

All as per item No 244 above but size 70 to 120 sq mm

Disconnecting the existing cable from Panel / Pole, preparing the end for jointing including all earth work, Supply and fixing straight through heat shrinkable joint suitable for LT XLPE cable of size 3.5 core 16 to 50 sq mm complete all as specified and directed by Engineer-in-Charge

All as per item No 247 above but size 70 to 120 sq mm

Material and labour for maintenance of feeder pillar/LT Panel indoor/outdoor type including removing the carbonized/melted sparked thimbles, cleaning the the carbonized bus bar making cable ends fresh and supply and crimping new thimbles and fixing the cable on bus bar/MCCB/ Main switch/MCB including providing new nut bolts and washer if required, greasing the doors of feeder pillar/LT Panel outdoor/Indoor type complete all as specified and directed by Engineer-in-Charge

Cleaning the existing painted surface of LT Panel by scrapping, making good disturbed surfaces by applying putties on uneven surface to make it even, M&L for painting to LT panel of any size with two coat of synthetic enamel paint with disired colour over one coat of red oxide complete all as specified and directed by Engineer-in-Charge

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n exc 500 ltrs capacity and writing date of cleaning using synthectic enamel paint complete all as specified and directed by Engineer-in-Charge

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 4000 & n exc 5000 ltrs capacity and writing date of cleaning using synthectic enamel paint complete all as specified and directed by Engineer-in-Charge

M/s JP Constructions