Loading
Loading…
Loading…
Tender Value
₹49.1 Cr
EMD Value
₹98.1 L
Closing Date
20 Apr 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
TELE WORKS
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where: V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet As per Clause No. 10.2 of Tender Form (second Sheet) of Annex. I of Part-I of GCC-2022, with up to date correction slip.
The tenderer must have successfully completed or substantially completed any of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. Incase tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. As per Clause No.10.1 of Tender Form (second Sheet) of Annex. I of Part-I of GCC2022, with up to date correction slip.
Definition of similar work: "Any work involving trenching laying jointing/splicing and commissioning of OFC and/or Quad cables"
74 conditions · 10 needing a document upload
All other Mandatory document as per Tender Document
Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period.
In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tender document cost as described in the NIT header will be submitted by the tenderer only through net banking or payment gateway only. Note- Fixed deposit receipt ( FDR) will not be accepted as TDC for tenders invited on IREPS ( e- tender portal)."
The EMD cost as described in the NIT header will be submitted by the tenderer only through net banking or payment gateway only. Note- Fixed deposit receipt ( FDR) will not be accepted as EMD for tenders invited on IREPS ( e- tender portal).
The tenderer inthe capacity of JV firm shall submit the Notarized Copy of Resolution of the Partners of LLP firm, permitting the LLP firm to enter into a JV agreement, authorizing one of the partner of LLP firm to sign JV MOU/ Agreement and such other documents required to be signed on behalf of the LLP firm and to create libilities against the LLP firm and / or to do any other act on behalf of the LLP firm as per proforma given in Annexure- XXIV (Mandatory for JV firm if one of the member is LLP firm).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should note that tender will be dealt as per GCC 2022 and latest amendments to it.
Rates in the schedule items of work are inclusive of all taxes as per clause 37 of GCC-2022
Wherever there is any ambiguity in SOR Item Description, that particular item description in latest RDSO Specification to be considered as FINAL.
The work shall be executed as per latest RailwayBoard/RDSO/Zonal Head Quarter/Divisional Office etc.guidelines/Policies/Circulars
Items should be complied with Trusted Telecom Portal RailwayBoard Letter No. 2023/Tele Dev/Trusted Sources, dated Date:11.10.2023.
No item should be out dated or debarred from any Railway.
Provision of 4x48F OFC for Indigenous Train Collision Avoidance System over JP division of NWR (631 Rkms) (Umbrella Work 2024-25)
SNT-JP-31-2025-26
SNT-JP-31-2025-26
Open
Works - General
18 Months
Jaipur, Rajasthan
₹0
₹98.1 L
20 Apr 2026
27 Mar 2026
6 Apr 2026
111 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,76,37,146.96 | ||
| — | 4.00 | — | — | ||
| "Multi Function Digital Photo Copier : - Model No. 5018A ( Brand New ) Per Minute Speed : 50 cpm .*Network Print * Color Scan. * Copy ( A3, A4, And Legal ) * Duplex & RADF * Two Trays & Multi By-Pass Tray * Trolley(SPECIFICATION ENCLOSED) Firm's offer:Toshiba 5018A" INSPECTION:CONSIGNEE. | — | — | — | 10,14,800 | |
| — | 4.00 | — | — | ||
| "Supply of EPSON Multi-function Color Printer, Model No. EPSON L15160. Warranty 3 Year. Make EPSON or Similar. (Accepted Make. EPSON Multi-function Color Printer, Model No.EPSON L15160 )" INSPECTION:CONSIGNEE | — | — | — | 3,10,316.4 | |
| — | 1.00 | — | — | ||
| "Supply of Movable File Storage System (compactor) 3-Bay Mechnized Drive Type .Brand :-VM-VM ENTERPRISES Brand Type : Unregistered Brand Catalogue Status : OEM verified catalogueSelling As : OEM .Category Name :- Movable File Storage System (Compactor ) Model :- Movable File storage system (compactor )" INSPECTION:CONSIGNEE. | — | — | — | 5,26,100 | |
| — | 1.00 | — | — | ||
| "Supply locker with 15 compartments should have following specification: over all size: 1900 mm H X 900 mm W X 480 mm D, individual compartment size: 360 mm H X 300 mm W X 450 mm D, Body & door - 22g (0.8 mm crca), with in built cam lock, air ventilation on each door, with inbuilt indexing arrangement, with inbuilt plush handle on each door, Finish: fully powder coated." INSPECTION:CONSIGNEE | — | — | — | 21,830 | |
| — | 5.00 | — | — | ||
| "Supply of Samsung/SONY/LG 55"" UHD SMART LED display unit 55AU8000 or similar model in Sony of LG Accepted firms offer Make: SAMSUNG MODEL NO.55AU8000" INSPECTION:CONSIGNEE | — | — | — | 3,86,995.2 | |
| — | 2.00 | — | — | ||
| Supply of Steel Almirah/book case 1145x460x750mm Make/model- Godrej Elam Credenza-1 (laminate) or similar. INSPECTION:CONSIGNEE | — | — | — | 23,400 | |
| — | 1.00 | — | — | ||
| "Supply of EPSON Standard Throw (0.91 to 2.5) Multimedia Projector (MMP) With 1920 x 1200 (WUXGA) Resolution. GeM specification enclosed. Accepted Make/Brand: EPSON FH06 as per attached pdf." INSPECTION:CONSIGNEE | — | — | — | 52,992 | |
| — | 504.00 | — | — | ||
| Ground Penetration Radar Survey (GPRS) for Cables utilities from main track centre till 20 m on bothsides of Track. Ground Penetrating Radar (GPR) below the existing ground level to locate and identify all existingunderground utilities/buried objects including but not limited to pipelines, cables etc. in the proposed corridor along withlocation, depth and dimensional details of utilities. Report and Drawings incorporating all collected data shall besubmitted as per scope of work and direction of the Engineer-in-charge. GPR Survey for mapping buried utilities fordetection of underground utilities in any of the Divisions over NWR. Drawings & Data- utility maps in formats such asPDF &AutoCAD shall be furnished. Conducting Drone survey for preparation High quality map showing the utilities plan-a. Fixing Ground Control Point b. Flying drone to collect high quality Orthoimage c. Processing of orthoimage by georeferencing to get Proper and accurate Orhomosaic for Mapping Work. Preparation of accessible and effective mapsoftware- Preparation of accessible and effective map software to navigate the plan tagged, to reach out the properlocation by using the utilities Map Underground Utilities Traced by Mobile Navigation app directly)" from main trackcentre till 20 m (10 m on both sides of Track). iNSPECTION: CONSIGNEE (UNIT:PER Km) | — | — | — | 1,24,89,120 | |
| — | 63.00 | — | — | ||
| Ground Penetration Radar Survey (GPRS) for Cables utilities from main track centre till 20 m on bothsides of Track. Ground Penetrating Radar (GPR) below the existing ground level to locate and identify all existingunderground utilities/buried objects including but not limited to pipelines, cables etc. in the proposed corridor along withlocation, depth and dimensional details of utilities. Report and Drawings incorporating all collected data shall besubmitted as per scope of work and direction of the Engineer-in-charge. GPR Survey for mapping buried utilities fordetection of underground utilities in any of the Divisions over NWR. Drawings & Data- utility maps in formats such asPDF &AutoCAD shall be furnished. Conducting Drone survey for preparation High quality map showing the utilities plan-a. Fixing Ground Control Point b. Flying drone to collect high quality Orthoimage c. Processing of orthoimage by georeferencing to get Proper and accurate Orhomosaic for Mapping Work. Preparation of accessible and effective mapsoftware- Preparation of accessible and effective map software to navigate the plan tagged, to reach out the properlocation by using the utilities Map Underground Utilities Traced by Mobile Navigation app directly)" 40 m (20 m both sidefrom Track centre) INSPECTION:CONSIGNEE | — | — | — | 18,58,500 | |
| — | 63.00 | — | — | ||
| Ground Penetration Radar Survey (GPRS) for Cables utilities from main track centre till 20 m on bothsides of Track. Ground Penetrating Radar (GPR) below the existing ground level to locate and identify all existingunderground utilities/buried objects including but not limited to pipelines, cables etc. in the proposed corridor along withlocation, depth and dimensional details of utilities. Report and Drawings incorporating all collected data shall besubmitted as per scope of work and direction of the Engineer-in-charge. GPR Survey for mapping buried utilities fordetection of underground utilities in any of the Divisions over NWR. Drawings & Data- utility maps in formats such asPDF &AutoCAD shall be furnished. Conducting Drone survey for preparation High quality map showing the utilities plan-a. Fixing Ground Control Point b. Flying drone to collect high quality Orthoimage c. Processing of orthoimage by georeferencing to get Proper and accurate Orhomosaic for Mapping Work. Preparation of accessible and effective mapsoftware- Preparation of accessible and effective map software to navigate the plan tagged, to reach out the properlocation by using the utilities Map Underground Utilities Traced by Mobile Navigation app directly)"for Railway Yardcorridors upto 100 m (50 m both side from Track centre) INSPECTION:CONSIGNEE | — | — | — | 26,01,900 | |
| — | 6.00 | — | — | ||
| Supply of All in One PC with Battery & UPS. DETAILED SPECIFICATION AS PER TENDER DOCUMENT.INSPECTION:CONSIGNEE | — | — | — | 8,26,944 | |
| — | 390.00 | — | — | ||
| Supply, Installation, testing and commissioning of 48 Fiber (SC/APC-SC/APC) FDMS as perRDSO/SPN/TC/037-2000 Rev.3, Amdt. 2 or latest. Inspection: RITES. | — | — | — | 1,06,16,334.3 | |
| — | 5.00 | — | — | ||
| Supply of Remote terminal unit for monitoring the dark fiber comprising the 8 port optical switch andcapable of monitoring 8 fibers at a time respectively and covering a monitoring distance of minimum 75 Km OFC eachoptical port. Equipment must be of 40dB or more dynamic range with 8 port optical switch output. powered from bothDC 48 V and AC 230V, 50 HZ. RTU must be able to be fitted in existing 19" Rack. It should be able to generatewavelength of 1310nm or 1550nm or 1625 nm for monitoring of Fibers. Insertion loss must not be more than 1.5 dband MTBF must be better than 6 million cycles. It shall also be operated in temperature range of -40 deg C to 70 deg C(As per Technical Annexure) Inspection- Rites. | — | — | — | 68,63,427.55 | |
| — | 5.00 | — | — | ||
| Installation and commissioning of RTU as supplied above. | — | — | — | 67,500 | |
| — | 1.00 | — | — | ||
| — | 1.00 | — | — | ||
| — | — | — | 16,875 | ||
| — | 1.00 | — | — | ||
| — | — | — | 5,69,713.52 | ||
| — | 1.00 | — | — | ||
| — | — | — | 6,375 | ||
| — | 681.00 | — | — | ||
| — | — | — | 10,69,994.01 | ||
| — | — | — | Specification | ||
| — | 40368.00 | — | — | ||
| Splicing of Optical Fiber Core and routing in joint closure/FDMS as per instruction of site Engineer. | — | — | — | 42,72,952.8 | |
| — | 53.00 | — | — | ||
| Supply of 24U Covered rack complete with all fitting like PDU 12 SOCKET, Server tray, 4 Fans of suitablesize for housing network attached storage .Inspection:- Rites | — | — | — | 10,34,584.38 | |
| — | 1.00 | — | — | ||
| "Supply, Programming and Installation of Bosch CCS-CUD Control Unit for CCS 900 Ultro Conference System" Inspection: consignee | — | — | — | 1,25,315.63 | |
| — | 5.00 | — | — | ||
| Supply of SPD Life tester, designed for on-site testing of surge protective devices (SPD). It allows checking and indicating the health status of GDT/MOV based SPD of voltage range upto 1000V. It shall indicate the status of SPD by measuring its electrical parameters.(Insp agency- Consignee) | — | — | — | 4,25,000 | |
| — | 1.00 | — | — | ||
| Supply of Phoenix Ferrule printerThermomark GO.K Set of MakePhoenix or similar reputed make.(Inspection Agency:Consignee) | — | — | — | 58,997 | |
| — | 25.00 | — | — | ||
| Supply of Heat Shrink Sleeve-White Colour MM-WMS 4.8(9XE)R C1WH/BK for the ferrule printer mentioned above, make-Phoenix or superior. (Inspection Agency: Consignee) | — | — | — | 1,48,945.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MakeInIndiaPolicy2017.pdf
ATTACHMENT
TelecomCircularNo.09_1.pdf
ATTACHMENT
GCC202210NosCorrectionSlipsofGCC_compressed.pdf GCC and 10 Nos Correction Slip
ATTACHMENT
48FOFCRBpolicy.compressed.pdf
ATTACHMENT
TenderdocumentSNT-JP-31-2025-26signed.pdf
ATTACHMENT
JPOforCableCut.pdf
ATTACHMENT
Tele_Cir_12-2023Trustedtelecom.pdf
ATTACHMENT
OFCDistributionPlan
ATTACHMENT
OFCLetter02.01.2026.pdf
ATTACHMENT
GCC202210NosCorrectionSlipsofGCC_compressed.pdf
ATTACHMENT
2024-10-09-LettertoRB-OFCDistributionPlan-Signed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .