Furniture work for the hall located on the first floor of the 10-courtroom (G+5) building at Civil Court Lakhisarai, including the installation of a 26-seater conference table, chairs, media table, etc., along with the installation of UPVC windows, etc.

NIT No .- 02 GR. No.- 03

TENDER BOQ FOR THE O;ogkj U;k;ky; y[khljk; ds 10 d{kh; (G+5) Hkou ds izFke ry ij vofLFkr gkWy dks fefVax gsrq 26 lhVj dkWUQzsUl Vscy] dqlhZ ehfM;k Vscy vkfn QuhZpj dk vf?k"Bkiu] f[kM+fd;ksa esa UPVC window vkfn dk dk;ZA

Estimate of Cost :- Date of Tender :-

Earnest Money :-

Cost of BOQ :- Time of Complition :-

Sl. No. SR Item No. Item of Works Quantity Unit Rate Amount (Rs.)

1 15.23.1 Dismantling tilework in floors and roofs laid incementmortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 92.87 sqm 30.70 2851.00

2 15.13.1 Taking out doors,windows and clerestory window shutters steel or wood) including stacking within 50 meters lead. Of area 3 sqm and below 9.76 sqm 58.90 575.00

3 11.41.3 Providing and laying vitrifed floor tiles in different sizes {thicknesstobe specified by the manufactruer) with water absorption'slessthan0.08% and conforming to IS : 15622of approved make in all colour sand shades, laid on 20mm thick cement mortar1:4(1cement: 4coarse sand ) includinggrouting the joint withwhitecement andmatching pigments etc., complete. Size of Tile 80x80 cm 86.39 sqm 2116.50 182844.00

4 11.46.3 Providing and laying Vitrified tiles in different sizes (thickness to be specified b ymanufacturer),with water absorption less than0.08%and conforming to I.S.15622, of approved make, in all colours&shade, in skirting, riserofsteps, over 12mm thick bedofcementmortar1:3(1 cement:3coarsesand), including groutingthejointwithwhitecement & matching pigments etc. complete. Size of Tile 80x80 cm 6.48 sqm 1658.00 10744.00

5 9.20.2 Providing and fixing ISI marked flush door shutter sconforming to IS:2202 (Part I) decorative type,core of block boardc on struction with frame of 1st lass hard wood and well matched teak 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 5.96 sqm 2578.00 15365.00

6 9.17.1 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 3.84 sqm 542.90 2085.00

7 9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 TypeS, including cost of adhesive of approved quality. 1.0 mm thick 3.84 sqm 669.00 2569.00

8 9.88 Providing and fixing chromium plate dbrass 100mm mortice latchand lock with 6 leve rsand apair of leve rhandlesofa pproved quality with necessary screws etc. complete. 3.00 Each 733.10 2199.00

9 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. 3.00 Each 108.10 324.00

10 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulicdoorcloser (havingbrandlogowithISI, IS:3564,embossedon thebody, doorweight up to 35 kg and door width upto700 mm), with necessary accessories and screws etc. complete. 3.00 Each 979.50 2939.00

11 9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 3.00 Each 369.40 1108.00

12 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.76 sqm 9471.00 92437.00

13 9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62x19 mm 3.90 sqm 992.40 3870.00

14 9.46 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 4.27 M 504.70 2155.00

15 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm) 8.78 sqm 1115.10 9791.00

16 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 210.00 Kg 161.10 33831.00

17 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 19.52 sqm 83.50 1630.00

18 Carriage of Material

(a) coarse sand 2.32 cum 367.70 853.00

19 Extra cost of material

(a) Cement 22.00 bag 1.00 22.00

20 Salvage of Material

MR Steel glazed window 95.00 Kg 20.00 & 1900.00

Total Rs. 366292.00

Add G.S.T @ 5.36% of S.O.R Items of Rs. 19633.00

Total Rs. 385925.00

21 AP Providing and fixing of PVC wall Panel with all Comp. job etc. do do E/I. 118.24 sqm 1380.00 163171.00

22 AP Providing and fixing of PVC false Ceiling panel with all comp. job. Do do E/I 116.82 sqm 1660.00 193921.00

23 AP Providing and fixing blind curtain with all comp.job…do do E/I. 11.50 sqm 1575.00 18113.00

24 AP Providing and fixing of Stell lettering with all comp. job do do E/I. 350.00 inch 75.00 26250.00

Total- 787380.00

25 N.SKAREENA MIID BACK CHAIR SEAT/BACK ASSEMBLY: The seat is made up of 1 2 +0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 +0.1cm. thick hot pressed plywood measured as per QA method descrioed in OCP-QLTA-P14-18 and upholstered with fabric or leatherette upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumbar suppor for comfortable seating posture *HIGH BACK SIZE 48cm.(W) X 76.0cm.(H) “MID BACK SIZE 48cm.(W) X 64.5cm.(H) *SEAT SIZE 51.0cm.(W) X 48.0cm.(D) 26 Each 21240 552240

26 BEAT VISITOR CHAIR The tubular frame is cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a M.S. Spine mounting bracket welded to it. Back spine is fitted to the frame assembly The seat is made up of 0.8 ±0.05 cm thk. hot pressed plywood & back is made up of0.8 ±0.05 cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. WIDTH (W) : 57.5 CM DEPTH (D) : 58.2 CM HEIGHT (H) : 100.8 CM SEAT HEIGHT (SH) : 47.0 CM. · Fixed Armrest Top is PU moulded over metal insert. The seat and back are arrested together with spine made of 0.8 ±0.05 cm thk HR Steel and is powder-coated ( DFT 40-60 microns ). 25 Each 16078 401950

27 CONFRENCE TABLE (26 Seater) Made of 25mm Thick Pre-laminated twin board of E2 grade and approved shade, Edge banded with matching 2 mm thick PVC lipping. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. It consist of 18mm Thick Pre-laminated twin board of E2 grade and approved shade, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy63400- WP profile is used for connecting panels together. The product has a knock-down construction. Made of 18mm Thick Pre-laminated twin board of E2 grade and approved shade, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. 1 Each 368176 368176

28 TRAVIT MEDIA TABLE WITH WHEEL Length - 1200.0 mm Width - 600.0 mm Height - 450.0 mm Table structure consists of: a. Visible panels are 18MM thk PLT panles. b. Hardware: high quality fasteners are used. Construction: Knock Down. 18mm THK Pre Laminated Particle Boards with laminate of Rimini Walnut suede finish and matching lipping with matt finish. 18mm THK Pre Laminated Particle Boards with laminate of Cloud Grey suede finish and matching lipping with matt finish. 1 Each 17980 17980

29 POSTURE PERFECT FULL BACK CHAIR Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *MID BACK SIZE: 50.5 cm. (W) x 61.8cm. (D) ARMRESTS: The armrest having four range of adjustment · Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other djustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. · Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 96.0 - 116.0 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM. This product should be certified by GREENGUARD GOLD & GREEN PRO. 2 Each 74577 149154