Repairing of existing sheds for light vehicle maintenance and other miscellaneous works at Amalgamated Yekona-I and II OC Mine under Yekona Sub Area of Majri Area.

CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable

Tender Inviting Authority: Staff Officer (Civil), WCL, Majri Area.

Name of the Work / Contract No: Repairing of existing sheds for light vehicle maintenance and other miscellaneous works at Amalgamated Yekona-I and II OC Mine under Yekona Sub Area of Majri Area / ma9511cive041-25-26/647 Dated 06.02.2026 / Sr. No.03

. Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder)

ITC Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.)

Name of the Bidder/ Bidding Firm / Company : Select

S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

CIVIL PORTION :-

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Sqm Excess(+) Full Conversion INR

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Sqm Excess(+) Full Conversion INR

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete Gutter (600 mm over all girth) Mtr. Excess(+) Full Conversion INR

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal All kinds of soil. Cum Excess(+) Full Conversion INR

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece Sqm Excess(+) Full Conversion INR

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Sqm Excess(+) Full Conversion INR

Granular Sub-base with Well Graded Material (CBR>30 or more) (Table:- 400-1 & Table 400-2) Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification.(i)For Grading-I Material Cum Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4graded stone aggregate 20 mm nominal size derived from natural sources). Cum Excess(+) Full Conversion INR

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg Excess(+) Full Conversion INR

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work Sqm Excess(+) Full Conversion INR

Finishing walls with Acrylic Smooth exterior paint of required shade . New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm Sqm Excess(+) Full Conversion INR

ELECTRICAL PORTION :-

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW 0.00_ Point 0.00_ Excess(+) Full Conversion INR

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 0.00_ Each 0.00_ Excess(+) Full Conversion INR

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB 0.00_ Each 0.00_ Excess(+) Full Conversion INR

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB 0.00_ Each 0.00_ Excess(+) Full Conversion INR

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 0.00_ Mtr 0.00_ Excess(+) Full Conversion INR

Supplying and erecting ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. 0.00_ Each 0.00_ Excess(+) Full Conversion INR

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 0.00_ Mtr 0.00_ Excess(+) Full Conversion INR

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. 0.00_ Mtr 0.00_ Excess(+) Full Conversion INR

Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base/flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/ 3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5mm thick laminate with S M screws and duly connected 0.00_ No 0.00_ Excess(+) Full Conversion INR

Supplying and erecting shockproof piano type switch 250V, 16A, erected on filled polypropylene board or polished double wooden/ folded or screwed board with top of either wooden/ 3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S N screws and duly connected. 0.00_ No 0.00_ Excess(+) Full Conversion INR

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board 0.00_ No 0.00_ Excess(+) Full Conversion INR

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF. 0.00_ No 0.00_ Excess(+) Full Conversion INR

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast ifnecessary 0.00_ No 0.00_ Excess(+) Full Conversion INR

Total impact of GST for the purpose of CTC Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information