Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC 13 29 3RD FLOOR EAST PATEL NAGAR NEW DELHI 110 008 | WEST | DELHI | 110008 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹42.0 L+₹1.2 L (2.95%)Rejected-AOC WZ 409 0 B 1ST FLOOR PLOT NO 12 JANAK PARK HARI NAGAR NEW DELHI 110064 | NEW DELHI | WEST DELHI | DELHI | 110064 | L2 | Rejected-AOC L2 Bidder | |
| 3 | L3₹44.3 L+₹3.5 L (8.65%)Rejected-AOC 19 62 1ST FLOOR WEST MOTI BAGH SARAI ROHILLA NEW DELHI 110035 | NEW DELHI | NEW DELHI | DELHI | 110035 | L3 | Rejected-AOC L3 Bidder |
Tender Value
Refer Docs
EMD Value
₹87,800
Closing Date
8 Oct 2020, 6:00 pmClosed
GE I RND DELHI
MILITARY ENGINEER SERVICES, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
REPAIR/MAINT TO INTERNAL ELECTRIFICATION INCLUDING HVAC SYSTEM AND CERTAIN MISC ALLIED WORKS AT JCB LABS AND VARIOUS LABS OF METCALFE HOUSE AREA UNDER GE IN RND DELHI
2020_MES_342164_3
GE/RND-15/DLI/2020-2021
Open Tender
Civil Works
Item Rate
180 days
DELHI
Class D, Cat b(i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹87,800
Yes
10 Nov 2020
22 Sept 2020
10 Oct 2020
22 Sept 2020
8 Oct 2020
26 Sept 2020
Amount
Taking down carefully unserviceable aluminium point wiring for light/socket/power socket complete, including fixtures and fitting such as switches, ceiling roses, pendents, regulators, socket and making good distrubed surfaces on walls, ceiling, floors etc. complete all as specified & directed.
M&L for point wiring for lights/fans with PVC insulated FR LSH unsheathed copper conductor cable of size 1.5 sqmm including earth wire of size 1.5 Sqmm in and including Concealed PVC conduit of size 20 mm medium grade including 2mm thick Metal Flush sheet box and PVC white modular Inner/Outer cover plate with frame, for one light one fan/call bell including cutting chases for conduit where required and making good to wall and ceiling complete all as specified and as directed.
All as per item No 2.00 above but one bell point controlled by one switch.
All as per item No 2.00 above but one light point controlled by 02 nos two way switches.
All as per serl item No. 2.00 above but for 5 pin switch socket outlet 5 Amp on independent board.
All as per serl item No. 2.00 above but for 5 pin switch socket outlet 5 Amp on same board with other switches complete all as specified.
All as per serl item No. 2.00 above but for 5 pin switch socket outlet 5 Amp independent but below the switch board in the same verticle plane.
M&L for one point wiring for lights/fans with PVC insulated FR LSH unsheathed copper conductor cable of size 1.5 sqmm including earth wire of size 1.5 Sqmm in existing pipe including 2 mm thick Metal Flush sheet box and PVC white modular Inner/Outer cover plate with frame, for light and fan/call bell including cutting chases for conduit where required and making good to wall and ceiling including taking down old unserviceable point wiring excluding conduit complete all as specified and as directed.
All as per serl item No. 08.00 above but one 5 pin socket out let 5 Amps on same board.
All as per serl item No. 08.00 above but one 5 pin socket out let 5 Amps on independent board.
M&L for one point wiring with PVC insulated FR LSH unsheathed copper conductor cable of size 4.0 sqmm including earth wire of size 4.0 Sqmm in and including Concealed PVC conduit including 2mm thick Metal Flush sheet box and PVC white modular Inner/Outer cover plate with frame, for 15 amps power point including cutting chases for conduit where required and making good to wall and ceiling complete all as specified and as directed.
M&L for point wiring with PVC insulated FR LSH unsheathed copper conductor cable of size 1.5 sqmm including earth wire of size 1.5 Sqmm in and including PVC Casing/Caping including 2mm thick Metal Flush sheet box and PVC white modular Inner/Outer cover plate with frame , for one light/fan/exhaust fan /bell point including cutting chases for PVC casing caping of required size and making good to wall and ceiling complete all as specified and as directed.
All as per ser itme No. 12.00 above but one 3 pin socket out let 5 Amps independent.
All as per ser itme No. 12.00 above but one 3 pin socket out let 5 Amps same board.
M&L for one point wiring with PVC insulated FR LSH unsheathed copper conductor cable of size 4.0 sqmm including earth wire of size 4.0 Sqmm in and including PVC conduit on surface/ceiling including 2mm thick Metal Flush sheet box for modular and PVC white modular Inner/Outer cover plate with frame, for 15 amps power point including cutting chases where required and making good to wall and ceiling complete all as specified and as directed.
M&L for one point wiring with PVC insulated FR LSH unsheathed copper conductor cable of size 4.0 sqmm including earth wire of size 4.0 Sqmm in and including PVC Casing /Caping on surface/ceiling including PVC gang Box for 15 amps power point including cutting chases where required and making good to wall and ceiling complete all as specified and as directed.
S&F Modular switch 1 way 6A, 1 Module complete all as specified and as directed.
S&F modular switch 6 Amps 230V AC complete two way complete all as specified and as directed.
S&F modular switch 1 way 16A, 1 Module complete all as specified and as directed.
S&F Modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed .
S&F Modular socket 6A/16A- 2/3 pin combined 2 module complete all as specified and as directed.
S&F Switch Piano, Flush type single pole, one way 5 Amp complete all as specified and as directed.
S&F Socket outlet 2 in1, 3pin, 5A complete all as specified and as directed.
S&F Switch Piano, Flush type single ploe,one way 15 Amp complete all as specified and as directed.
S&F Socket outlet 2 in1,3pin,5A and 15 amp flush type complete all as specified and as directed.
S&F electronic fan regulator 240 V step type single pole complete all as specified and directed .
S&F fan step regulator, 120W, 2 Module complete all as directed
S&F ceiling rose, surface bakelite 65mm x 50mm three terminals PVC polycarbonate all as specified.
S&F in repair of old unservicable flurorescent light tube 1x36 with LED Tube rod of 20 Watt disconnecting existing wire from bipin holder, diconnecting existing blast, removng carefully existing tube and making connection for LED tube light,20 Watt including supply and fixing 20 Watt Ultra bright LED in same fitting, including necessary electric connection with twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose all as specified and directed. Make: Havells Cat part No.-CRYSTAL 1213T8DSTL20WLED865SGLASS or equivalent in Wipro/phillips.
S&F in repair of Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.trica batten 230 volt, 50 Hz, 22 watt and twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose complete all as specified and directed. Make: Havells Cat part no-ENDURALINEARNEOBS22WLED865SPCWH or equivalent in phillips/Wipro.
S&F in repair of LED recess mounted Octane panel square type with Slim, compact, aluminium die cast edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver. 230 volt, 50 Hz, 12 watt, 3000K including and twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose, including necessary alteration work in false ceiling to cover the blank space in false ceiling complete all as specified and directed. Make: Havells Cat part no LHEBHEP5IZ1W012 or equivalent in Wipro /phillips.
S&F in repair CFL light to new LED recess mounting panel 2'×2' fitting 42 watt and making all electric connections including twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose including necessary alteration work in false ceiling to cover the blank space in false ceiling complete all as specified and directed. Make- PLUTONEO2X2PLR42WLED857S of make Havells or equivalent in Wipro/Phillips.
S&F in repair linear & compact LED mirror light 9 watt, incluing cable for making circuit and 9 watt LED tube complete and including twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose complete all as specified and directed. Make:Cat Part No.-LUMILINEBS9WLED865SPCWH of Havell or equivalent in Wipro/Phillips.
S&F in repair CFL light to new LED surface mounting panel 2'×2' fitting 36W and making all electric connections and including twin core 1.5 sqmm flexible copper conductor cable for connecting to ceiling rose complete all as specified and directed. Make-PLUTOSURFA CE2X2PLS42WLED857S of' Havells or equivalent in Wipro/Phillips.
S&F in repair of SPN DB 12 ways with 200 amps rated busbar 240 volt double door ccomplete all as specified and directed. Make: Havells/Scheinider/Legrand
S&F in repair of SPN DB 8 ways with 200 amps rated busbar 240 volt double door complete all as specified and directed. Make: Havells/Scheinider/Legrand
S&F in repair of SPN DB 4 ways with 200 amps rated busbar 240 volt double door complete all as specified and directed. Make: Havells/Scheinider/Legrand
S&F in repair of TPN DB 6 ways with 200 amps rated busbar 415 volt double door complete Make: Havells/Scheinider/Legrand
S&F in repair of TPN DB 8 ways with 200 amps rated busbar 415 volt double door complete all as specified and directed. Make: Havells/Scheinider/Legrand
S&F in repair of TPN DB 12 ways with 200 amps rated busbar 415 volt double door complete all as specified and directed. Make: Havells/Scheinider/Legrand
S&F in repair of MCB SP, C- curve, 230 volt 6 -32 amp 10KA complete all as specified and directed.
S&F in repair of MCB SPN 230 volt 40 amp 10KA 'C' Curve complete all as specified and directed.
S&F in repair of MCB SPN 230 volt 63 amp 10KA 'C' Curve complete all as specified and directed.
S&F in repair of MCB TPN 415 volt 63 amp 10KA 'C' Curve complete all as specified and directed.
S&F in repair of MCB TPN 415 volt 100amp 10KA 'C' Curve complete all as specified and directed.
S&F in repair of of sheet metal enclosure, SPN type with two pin & earth plug and socket Industrial type DB with and including one MCB SP, C Curve type of capacity 25 Amp, 10 kA complete all as specified and directed.
S&F in repair of Triple pole and earth encolsure with a three pin and earth plug with socket complete with including one triple pole MCB 63 Amps 415 V 'C' curve complete all as specified and directed.
S&F in repair of sub main wiring with four run of single core PVC insulated FRLSH stranded copper conductor cable of size 16 Sqmm and two run of 16 Sqmm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and in existing surface PVC conduit concealed medium grade complete all as specified and directed.
S&F in repair of sub main wiring with four run of single core PVC insulated FRLSH stranded copper conductor cable of size 10 Sq mm and two run of 10 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and in existing surface PVC conduit concealed medium grade complete all as specified and directed.
S&F in repair of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 6 Sq mm and one run of 6 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and in existing surface PVC conduit concealed medium grade complete all as specified and directed.
S&F in repair of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and in existing surface PVC conduit concealed medium grade complete all as specified and directed.
S&F in repair of 3 Pole MCCB, 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA complete all as specified and directed.
S&F in repair of 3 Pole MCCB, 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA complete all as specified and directed.
S&F in repair of 4 Pole MCCB, 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed.
S&F in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drain in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 20x3mm copper strip all as specified & directed.
S&F in repair of 4 Pole MCCB, 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed.
S&F in repair of Bell multi music type AC ,230 Volts ,single phase complete all as specified and directed.
S&F in repair of bell push modular 6 Amp 1 module complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earthstrip 25x4mm by means of nuts, check nut & washers, GI pipe 40mm dia (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40cm x 40 cm x 40mm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I.
S&F in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip all as specified and directed.
M&L for in repair of Chemical earthing copper bonded Rod/Earthing termination bonded steel earth rods of 3mtr minimum length, 17.2mm dia, interconnected with copper bonded flanges (Minimum copper bonding shall be 0.25mm) along with Rod to Conductor connectors, and other accessories as per IS 3043, NBC 2016, IEEE80, UL 467, CPRI tested at 25K Amps along with 30 KG pure carbon based Earth Enhancement compound tested by NABL accredited lab for ROHS complying IEC 62561-7 in a sealed bag and inspection pit covers including earth work in any type of soil all as shown in drg attached complete all as specified and directed.
S&F in repair of MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 4 way. 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed. Make- Havells Cat No DHDLVDRWAOFO04 or equivalent approved.
S&F in repair of MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 8 way. 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed. Make- Havells Cat No DHDLVDRWAOFO08 or equivalent approved.
Taking down of geyser of capacity 25 ltrs after disconnecting the water connections and electric connections etc complete all as directed and S&F in replacement of unserviceable with new stainless steel tank with assembly to make the geyser fully functional and refixing the same at its orignal position complete all as specified and directed.
S&F in repair of Heating element triangle/round type as existing of capacity 1.5KW of Hot appliances complete all as specified and directed.
S&F in repair of thermostate as existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.
S&F in repair of shut off valve as existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed. .
S&F in repair of Thermo insulation glass wool as existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.
S&F in repair of water connection CP for inlet & outlet (Hot & Cold) as existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.
S&F in repair of indicator light (Red & Green) as existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.
M&L for taking down of ceiling fan of size 1200 mm/1400 mm sweep metal body type, single phase, 240 Volts AC greasing/oiling,Rewinding with super enameled copper wire of existing gauge/size and painting with synthetic enamel paint using spray machine including marking of MES No and connecting, testing complete all as specified and directed.
M&L for taking down of Exhaust fan of any size, 400/450mm sweep metal body type, single phase, 240 volts AC greasing/oiling, Rewinding with super enameled copper wire of existing gauge/size, and painting with synthetic enamel paint using spray machine including marking of MES No and connecting, testing complete all as specified and directed.
All as per item No 72.00 above but for wall mounted of 450/600 mm sweep.
S&F in repair of defective ball bearing for ceilng/table/pedestal/Air-circulators fan of any size. Make/size: SKF-6201/6202/ or TATA.
All as per item No 74.00 above but for exhaust fan. Make/size- SKF 6203/6204 or TATA.
S&F in repair of rubber seal of suitable size for ceiling fan complete all as specified and directed.
S&F in repair of gun metal bush suitable for any type/model/size of fans complete all as specified and directed.
S&F in repair of down rod for ceiling fan extended upto 2.0 mtr length including all necessary fixing assessories complete all as specified and directed.
S&F exhaust fans heavy duty metallic AC single phase 230/ 240 V of size 380 mm sweep with GI louver 900 RPM including taking down old unserviceable and deposited MES store yard complete all as specified and directed. Make:Turbo Force SP of Havells or equivalent CG/Bajaj/Orient/Usha
S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated including taking down old unserviceable and deposited MES store yard complete all as specified and directed. Make : Havells Model No ES-50 white or equivalent CG/Bajaj/Orient/Usha
S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep Turbo Force suitable for wall mounting including taking down old unserviceable and deposited MES store yard complete all as specified and directed. Model : Turbo Force of Havells or equivalent CG/Bajaj/Usha/Orient
S&F in repair of unserviceable Capacitor 2.5 MFD complete all as specified and directed.
M&L for Servicing of the window AC 1.5/2 ton capacity of any make, including oiling/greasing the blower motor, cleaning the evaporator condenser coils externally to remove the dust, replacement of defective thimbles etc and re-fixing the air conditioner at its original position by the experienced refrigeration mechanic complete all as specified and as directed. Note:- (i) Any unserviceable items need to be replaced/gas charging etc shall be measured & paid seperately under respective items. (ii) The cost of dismantling, taking out window AC 1.5/2.0 ton from window and shifting to location where directed for proper washing and servicing and refixing the same shall be deemed to be included in item rate quoted.
All as per ser item No. 83.00 above but for split type AC/Inverter type AC 1.5/2.0/4.1 Ton.
S&F in repair fan Motor of AC (Window/ Split Type) 1.5 TR Capacity of required Size to suit existing AC complete all as specified and as directed. Make : AUE/FRAGMETER
S&F in repair of Hermitacally sealed compressor for split/ window type AC capacity 3 TR three phase run complete all as specified and directed.
S&F in repair PCB with remote for Split type AC 1.5 TR to 3 TR capacity complete all as specified and directed.
Taking out split type AC complete indoor and outdoor unit from any height/ any floor up to four storey building by including pumping down the gas into the compressor by controlling the suction and discharge valves , disconnecting the suction and dischagre copper piping and shifting to another locatiion in the same or other building in the complex including shifting and refixing of the unit complete all as specified and directed. Note: Gas shall be measured and paid separately for split AC.
Supply and charging the gas refrigerant R22 (including refrigerant) of window type AC upto 2 ton capacity including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.
S&F in repair of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. Note:-The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work upto six stories building.
All as per ser item No. 90.00 above but size 5/8"complete all as specified and directed.
S&F in repair PVC HDPE pipe 25 mm dia including all clamps & accessories and connecting the condensate pipe of ACs to this conduit for proper drainout of condensate water from ACs of Bldgs upto 5 (five) storey complete all as specified and directed.
S&F in repair of synthetic rubber foam for insulation for refrigerant copper piping of existing size 1/4" to 5/8" internal dia split type AC complete all as specified and directed suitable for the existing sizes.
Supply, Installation, commissioning and testing condensing coil for 3 x 210 TR AC Plant of Make : YORK Model No. YVAA0263 including insulaion of New coil with Brazing, Vaccuuming including taking down old userviceable condensing coil as per existing OEM.
M&L for Epoxy protective coating on Copper piping system, headers (Discharge line, Liquid line, all open fittings of copper, suction line etc) for one circuit chiller of 3 x 210 TR AC plant of Make : YORK Model No. YVAA0263 as per OEM. Note: Measure 1 circuit of chiller for 1 unit.
Supply and charging the refrigerant R-134a for 3 x210 TR chiller type AC plant Make : YORK Model No. YVAA0263 including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.
Supply and filling of Coolant for topping up of compressor for 3 x 210 TR AC plant of Make : YORK Model No. YVAA0263 including taking out old coolent complete all as specified and directed.
Supply and filling of Compressure oil (YORK OIL, L5 Gal Pail) for 3 x 210 TR AC plant of Make : YORK Model No. YVAA0263 including taking out old oil complete all as specified and directed.
M&L for Servicing of complete AC plant 3x210 TR Model No. YVAA0263 including electrical panels, VSD Panels as per OEM complete all as specified and directed.
Supply and fix FILTER DRIER 3/8 ORFS for 3 x 210 TR AC Plant Make : YORK Model No. YVAA0263 As per existing OEM for each circuit all as specifed and directed.
Supply and Fix CTG DEHY 100 PERCENT MOLECULAR for dehydrator for refrigrant circuit for 3 x 310 TR AC Plant Make : YORK Model No. YVAA0263.
S&F in repair of PVC gang box for 15 Amps switch socket complete all as specified and as directed.
S&F in repair of white hylum laminated sheet 3mm thick including cutting, drilling with all accessories for fixing of switch/sockets complete all as specified and as directed .
S&F of telephone socket jack RJ 11 With shutter.
S&F telephone cable in and including concealed PVC conduit including connecting in telephone socket complete.
Flint India
SNOWY ENGINEERING INC
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .