SPL REPAIR TO BLDG NO P 2/3 OF MED REGT AT OAC AND MES SHEDS AT NEW VALLA AMN DUMP UNDER GE AMRITSAR

Amount

B/R Portion:- Taking down chowkats or frames with shutter (without taking off shutters from chowkats / frame) not exc 1.50 Sqm each including cutting of holes for hold fast complete all as specified.

All as per Srl Item No 01.00 here-in-before but exc 1.50 Sqm and not exc 4.00 Sqm each.

Demolition of cement concrete in ground floor and paving etc, not exc 15 cm thick (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 100m complete all as specified.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris, rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified.

All as per Srl Item No 05.00 here-in-before, but except bricks. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on other than fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 5 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

Material and labour for 100 mm thick PCC 1:2:4, type B1, using 20mm graded stone aggregate, as in floor / paving / hard standing, finished even and smooth without using extra cement complete all as specified.

Material and Labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

S&F steel rolling shutters without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer errected in position as indicated complete push pull of manual type with thickness of lath 1.25mm complete all as specified and as directed.

M&L 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified.

Supply and fixing plain, framed, panelled shutters 35mm thick (any numbers of panels) of 2nd class hard wood (Hollock), with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commerical face veneers complete all as specified

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

Supply and fixing solid PVC door frame, size 50x47mm, made of 5mm thick plain colour PVC sheet reinforced with MS square tube complete as specified and directed.

M&L box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one or two No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block, complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass, wire mesh and painting shall be measured and paid sperately.

M&L box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as stopper, cleat, pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes complete all as specified. Note: Sheet glass and painting shall be measured and paid Separately.

Supplying and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified.

S&F 4mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes including hacking out old broken glass from metal/wooden frame complete all as specified.

All as per Srl Item No 21.00 here-in-before but figured glass pin head type.

M&L mild steel framed works, as in door frame, gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, framed work as in grill, guard bars etc withends of bars riveted or forged into spikes, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

Supply and fixing rolled mild steel roof trusses (framed), trussed purlin, crane gantries, rails and fastening, heavy brackets framing (beam, tee, angle, channel or flat section) including distant pieces, cleats, conforming to Fe-410-W (Grade-E-250), Quality 'A' complete all as specified.

S&F butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete all as specified and directed

S&F 125mm size extruded aluminium anodized handle cast type complete all as specified.

S&F 200 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 300mm size, aluminium alloy anodised sliding door bolt,with sliding bolt not less than 12mm dia including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over a alkali resistant primer to achieve smooth surface complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of white wash on walls complete all as specified.

M&L for preparation of old decorated surface of walls including complete removal of existing treatment and applying two coats of white wash complete all as specified.

M&L for applying two coats of cement base paint on old surfaces of walls incl. of complete removal of existing treatement by washing down with water complete all as specified.

M&L for complete removal of old treatement by washing down with water and applying two coats of oil bound distemper over a primer on old treated wall complete all as specified.

All as per srl item no. 34.00 here-in-before but on ceilling instead of walls.

M&L for preparation of new steel surfaces of any description, over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 centimetre width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall / floor and making good in CM1:3 all as directed.

All as per Srl item No 39.00 here-in-before but bore of pipe 20mm.

S&F galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified.

Fixing only galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified. Note: Servicable pipe obtained under item No 41 shall be reused. Servicability of pipe shall be as decided by Engineer in Charge.

S&F galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor Complete all as specified.

Fixing only galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified. Note: Servicable pipe obtained under item No 42 shall be reused. Servicability of pipe shall be as decided by Engineer in Charge.

S&F, in repair, bib tap 15mm bore, chromium plated fancy type long nose screwed for iron pipe complete all as specified and directed.

Supply and fixing in replacement, angular stop valve,cast copper alloy,fancy type 15mm bore, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified.

All as per Srl Item No 46.00 here-in-before but 20 mm dia of pipe.

Supply and fixing in replar, stop cock, concealed type , 15mm bore, chromium plated, screwed down high pressure with long shank and cup(concealed type), screwed both ends for iron pipe or union complete all as specified.

S&F, in repair, PVC connections 450mm long of 15mm size with brass nuts and pvc washers 600mm long, on both sides complete all as specified.

S&F 125 mm size,shower rose chromium plated with CP arm fixed with 15mm bore GI pipe complete all as specified and directed.

S&F, in repair,25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials complete all as specified.

Dismantling floor hearth or wall tiles, stone slab including cement mortar bedding, in any position removing debris and rubbish off the premises complete all as specified and directed.

M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with cement @ 3.0 Kg/Sqm complete all as specified and directed.

M&L ceramic tiles, 7 to 8mm thick, coloured, jointless, non skid, (square / rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:4 complete all as specified.

M&L glazed ceramic coloured tiles of size 450x350x7mm thick, on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified and as directed.

Material and labour for pre-polished granite slab (colour as approved) 20mm thick, machine cut, laid, jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab including rounding of edges, over and including 15mm thick screed bed in cement mortar 1:6 as in vertical/horizontal surfaces complete all as specified and directed.

Supplying and fixing machine pressed precast concrete interlocking paver block, 60mm thick M-35 Grade, any shape and size, with grey cement and no pigment, conforming to IS 15658-2006, laid over and including 25mm thick layer of fine sand complete all as specified. Note : Design and pattern of interlocking block shall be as decieded by Engineer in Charge.

Material and labour for 20 mm thick kota stone slab flooring (Machine cut) of size 550x550mm laid over and including 20mm thick bedding layer in cement mortar 1:6, jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing by machine complete all as specified.

Material and labour for 18-20 mm thick kota stone (Machine cut) of size 550x550mm laid over and including 10mm thick bedding layer in cement mortar 1:4, jointed and pointed in grey cement mixed with pigment to match the shade of slab as in skirting/dado including rubbing and polishing to achieve mirror finish by machine complete all as specified.

S&F, in repairs, vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including 10 litre capacity, PVC valve less, symphonic action type flushing cistern, low level with inlet ball valve, float and handle, brackets, PVC flushing pipe 32mm dia, connecting to trap and making good to floor etc complete all as specified.

S&F vitreous china wash hand basin, white, flat back, size 550mm x 400mm including mild steel brackets, pillar tap 15mm size, chromium plated, PTMT waste coupling, PVC heavy duty waste pipe, including cutting for and pinning in ends of bracket complete all as specified.

Supplying and fixing vitreous china urinal, half stall type, size 420mm x 395mm x 635mm complete including providing and fixing bedding urinal against wall in cement mortor 1:2, pointing around urinal, including grating, union, disharge pipe, CP urinal spreader, CP waste coupling complete all as specified.

S&F 600mm long towel rail of stainless steel fixed with chromium plated brass screws with clets complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank triple layered (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position, capacity 500 litres including 20mm bore ball PTMT valve high pressure with polythene float and fly nut, screwed including dismantling of old unservicable water tank complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with MS stack clamps of adequate size or laid under floor / trenches including taking down old unserviceable pipe of any description complete all as specified.

Dismantling of CI pipe of dia 75/100 mm including all fittings like bend/branch piece etc fixed with cement joint complete all as specified and directied.

S&F cast iron soil waste and vent pipes 100mm dia in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.

S&F PVC(SWR) bend, any radius, for dia of pipe 110mm,with access door complete all as specified.

S&F CI bend, any radius, for dia of pipe 100mm, diminishing pieces with oval access door complete all as specified.

S&F CI branch piece, single(equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches dia of pipe 100mm complete all as specified.

M&L for 100mm dia cast iron floor trap, with CP grating & hole including jointing to waste pipe fixed in PCC 1:2:4, type B1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection / path, finished even and fair without using extra cement complete all as speciified.

Material and Labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate in hard standings complete all as specified and as directed.

M&L cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, as in blocks of hold fasts, back fill of presssed steel chowkats, roof kerb, mud stop, egdes rounded complete all as specified.

S&F 50mm dia GI steel tubing medium grade as in.spouts including mosquito proof caping at the outlet incl.taking down old tube complete all as specified and directed.

Dismantling corrugated or semicorrugated asbestos cement sheets complete all as specified in roof coverings.

M&L for corrugated or semicorrigated cement asbestos sheets 6 mm thick fixed in roofs,walls with L or J type hooks or cranked hook bolts complete all as specified.

M&L asbestos cement serrated ridge for corrugated or semicorrigated cement asbestos sheets 6 mm thick fixed in roofs,walls with L or J type hooks or cranked hook bolts complete all as specified.

S&F expanded metal n.exc. 4 kg per Sqm cut to length , bent to shape required and tying with annealed mild steel wire size not less 0.9mm in dia or fix with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m deep, in soft/loose soil for foundation, laying of pipes, cables, wells, cesspits, manhole, pier holes & getting out complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material to distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up of drain pipes (salt glazed ware or AC or reinforced cement concrete), set in cement mortar, complete all as specified and directed. Note:- Excavation and earth work shall be measured separately under respective items.

M&L providing concrete bed in PCC 1:3:6 type D-2 using 40mm graded crushed stone aggregate, as in bed to drain pipes, dia of 150mm, including packing under and haunching against the sides of the pipes completely after the pipes are laid and tested complete all as specified and directed. Note:- Width of concrete bed shall be outer diameter of drain pipe plus 30cm.

M&L 150mm dia salt glazed stone ware drain pipes, grade ‘A’, laid in trenches on concrete bed and jointed complete all as specified. Note:- Excavation and earth work shall be measured separately under respective items.

E/M Portion:- Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size not less than 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

All as per Srl Item No 88.00 here-in- before but for one socket outlet point 5 amps 3 pin on the same board.

All as per Srl Item No 88.00 here-in-before but for one socket outet point 5 amps 3 pin on independent board.

All as per Srl Item No 88.00 here-in-before but with 2.5 Sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for power point on independent board.

S&F switch piano flush type 5 Amp AC single pole one way, 230 volts, complete all as specified.

S&F socket outlet 5 Amps, 2 in 1, 3 pin , 230 volts, AC complete all as specified.

S&F switch piano 15 Amps, 230 volts, AC complete all as specified.

S&F socket outlet 2 in 1 , 3 pin 5/15 Amps, 230 volts, AC complete all as specified.

S&F ceiling rose surface bakelite 65 x 32mm three terminals complete all as specified and directed.

S&F lamp holder PVC body, angle type, glass type complete all as specified and directed.

S&F, fan regulator, 5 step rotary, heavy duty, 100W, 240 volts, AC complete all as specified.

Supply and fixing, wall/ceiling mounted, LED 18 Watt PC Diffuser tube light fitting complete with all accessories, 1x18 Watt LED tube rod and making necessary connection with PVC insulated copper conductor prewired internally with 1.5sqmm twin core 23/0.0076 twisted wire complete all as specified and directed.

Supply and fixing, LED flame proof 16/20 Watt tube light fitting complete with all accessories, 1x16 Watt LED rod 240 Volts 50 Hz and making necessary connection complete all as specified and directed.

S&F PVC wire FRLS multistranded with copper conductor 1.5 Sqmm including connection all as specified and directed.

S&F steel rigid conduit 20mm dia including accessories all as specified and directed.

Supply and fixing, in replacement, MCB , 10 KA, 40 to 63 Amp, double Pole, 'B' curve type complete all as specified and directed.

Supply and fixing, in replacement, MCB , 10 KA, 6 to 32 Amp, Single Pole, 'B' curve type complete all as specified and directed.

M&L for sub main wiring consisting two single core FR wire PVC insulated cable with stranded copper conductor, size 6 Sqmm, copper earth wire 6 Sqmm, drawn in and including concealed non metalic PVC conduit, 1.5 mm thick, not less than 20 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 6 Sqmm and one run of 6 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

Supply and fixing new generation energy saving and environmental friedly long life 10 watt LED ,6000K bulk head luminaire with opal diffuser light fitting complete all as specied and directed . Make - Wipro/Havelles&Syska or Equivalent cat part in makes specified in appendix 'B'

S&F sleek LED mirror light fitting provided with high output diffuser in 2 Ft version complete with all accessories and making all connections complete all as specified and directed.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Supply and fixing Distribution Board,double door,flame proof, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

S&F flame proof MCB DP 32Amps,10KA,250 Volts AC including all necessary connections complete all as specified and directed.

S&F flame proof MCB SP 6 to 32 Amps,10KA,250 Volts AC including all necessary connections complete all as specified and directed.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 6 Sqmm 2 core, service wire including GI wire complete all as specified.

Supply and fixing in replacement, security light LED 36 watt, aluminium pressure die cast housing with touched glass cover IP-66 protection including accessories, fixed on and including GI light grade pipe bracket 1.2 m length, made to shape and necessary MS clamps, bolts, nuts complete all as specified.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 16 Sqmm 2 core, including thimbles / lugs / cable gland etc, laid in duct / trench / along pole etc complete all as specified.

Supply and lay, bricks, common burnt, sub class 'B', old size, for protection of cable, laid in trenches over cable, length of brick perpendicular to directon of cable, complete all as specified and directed.

Material and labour for sand cushioning under floor, for laying cables with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :- Punned down thickness of sand shall be considered for measurement.

S&F GI pipe 50mm dia light grade for cable protection, fixed to poles, under road, along wall inculding necessary MS clamps complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mm, 6mm thick, burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate to a depth not lesss than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead wire of 4mm dia by means of GI nuts, bolts and washers. wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) Test point of GI strip of size 32mmx6mm. (b) Watering pipe of GI pipe light grade 20mm bore from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover (d) Angle iron frame made of 40x40x4 mm angle iron PCC pit for holding the pit cover. Note:- The cost of excavation & earth work shall be included in the quoted rates.

Bharat Builder