REPAIR /MAINT OF CERTAIN MISC PETTY REPAIR WORK IN CERTAIN UNITS UNDER AGE B/R-II, GE BABINA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc over and including 15 mm screed bed in CM(1:4) over and including 25 mm thick PCC(1:2:4) type B0(using 12.5mm graded stone aggregate) complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc over and including 15 mm screed bed in CM(1:4) over and including 25 mm thick PCC(1:2:4)type B0 (using 12.5mm graded stone aggregate complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc over and including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etccomplete all as specified and as directed

M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc over and including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling complete all as specified and as directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M & L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting, dado & pillar over and including 15mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 50mm thick cement concrete type B2, 1:2:4 (40mm graded aggregate) as in floor/hardstanding finished even and smooth without using extra cement complete all as specified and as directed.

M &L chequered tiles (Cement) 20cm X 20cm x 25mm set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 15mm thick screed bed in CM (1:6) Complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 60 mm thickness M-40 Grade , machine pressed precast concrete Inter locking paver blocks of any shape & size with grey cement and pigment conf to IS-15658-2006 laid dry over sand cushion complete all as specified and as directed. Note:-Sand cushion shall be measured and paid separately

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), to rise hight of brick wall complete all as specified and as directed.

M&L, Brick work with sub class ;B; bricks old size half brick thick straight or covered on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed

M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD over a coat of putty complet all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.

Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed

Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed

Supplying, fixing, jointing and testing 15mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Supplying, fixing, jointing and testing 20mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Fixing only old 15mm dia bore steel tubing and connections obtained from taking down against item No 8(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed

Fixing only old 20mm dia bore steel tubing and connections obtained from taking down against item No 8(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed.

S & F 500ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Fixing only old rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling existing complete all as specified and as directed.

S & F 1000ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Fixing only old1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed.

S&F in repair 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white, fixed with screws to timber frame work including teak wood lipping of exposed edges of and including polishing on it complete as in kitchen cabinet and bed room shutters or in any type complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed..

S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and as directed

S & f of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410-W (Gde-E-250) complete all as specified and as directed.

S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed.

S&F Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed.

M & L secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F, 35 mm thick Flush shutters, factory made, solid core construction, with block board core and plywood face panels, with decorative face veneers on both faces with lipping to match complete all as specified and directed.

S&F factory made fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed

M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165

M&L one coat synthetic enamel paint on old wooden surface incl prepartion of old surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed

S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindwar with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.

S&F in repairs Vitreous chine wash down water closet pan(padestal pattern), white(EWC) including plastic seat of same colour of Wc, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete.

S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white Make :- Hindwar with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.

S&F PVC bathroom cabinet with mirror of size 432mm x 311mm complete all as specified and as directed by the Engineer-in-Charge.

S&F glass self (500mmX60mm) with ABS brackets (450X125X6) and fixed to wall with CP brass screws complete all as specified and as directed.

Supply and fixing CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S&F brass CP mixer 15mm dia bore mixing hot & cold water for wall screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in rep PVC waste pipe with 32 mm bore and 65cm long with cap complete all as specified and directed.

S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.

S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange etc complete all as specified and as directed.

S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed all as directed.

S/F brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed.

S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair Brass cromium plated towel ring with wall flanges ,fixed on wall etc complete all as specifed and directed.

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed complete all as specified and as directed.

S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.

S&F in repair 25 mm dia chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge.

S&F in rep mild steel 300mm, ordinary rat tail rod pattern springs inculding roller and rollet plate complete all as specified and directed.

S&F in rep grating doom 100mm dia of PTMT (minimum weight 25 gms) with hole/whitout hole including fixing with white cement and making good surface complete all as specified and directed.

S&F in rep grating doom 125mm dia of PTMT (minimum weight 25 gms) with hole/whitout hole including fixing with white cement and making good surface complete all as specified and directed.

S&F in rep waste coupling of stainless steel any size for WHB/Sink (half or full threaded) complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tank of capacity exc 500 ltr & n.exc 1000 ltrs and from mouths of circulating pipes etc, using bleaching powder and washed with water including dismantling and reconnecting and refixing in position inculding writing date of cleaing with white synthetic enamel paint as ''CLEANDED ON'' complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and as directed.

S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with clamp out of 25x3mm flate Iron including bolts and nuts rubber ring joints, fixed to wall 75 mm bore complete all as specified and as directed.

S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access doorcomplete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

M&L for 100mm internal dia Salt-glazed stoneware drain pipes laid in trenches and joints complete all as specified and as directed.

M&L for type D-2 (1:4:8) concrete bed to drain pipes including packing under, and hunching against the side of pipe after they are laid and tested, in 100mm dia pipe complete all as specified and as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed.

S & F roof trusses (framed), trussed, purlines, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piecces, cleats, plates etc confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in rep chromium plated peg set of 6 with screws complete all as specified and directed by Engr-in-Charge.

Dismantling of ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets complete all as specified and directed.

S&F in repair false ceiling with 9-9.5mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600mm (595 x 595mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/ Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4mm dia bars of required length fixed in purlin of roof not exceeding 1.2m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F transparent fiberglass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured fiberglass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed.

Ms Vinay constructions (BID ID -3135890)

M/s Ravi Traders (BID ID -3144012)

M/S M S Constructions (BID ID -3138313)

M/S Chadha Brothers (BID ID -3139139)

DEVENDRA ENTERPRISES (BID ID -3138139)