PROVN OF GYM SHED AT MAP ACCN AT VAYU VIHAR, BROOKSHABAD AND PROVN OF TOILET AND APPROACH PATH FROM JCOs QTR TO STN PARK AND PROVN OF INTERLOCKING TILES AT CERTAIN PLACES AT VAYU VIHAR, BROOKSHABAD UNDER GE MINNIEBAY, PORT BLAIR

Amount

Surface dressing n.exc 15 cm in hard / dense soil complete all as specified and as directed

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/dense soil complete all as specified and as directed

Excavation in soft loose soil not exceeding 1.5 mtr wide, exc 1.5 mtr depth and n.exc 3 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed

Excavating in trenches in soft/loose soil, n exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 Sqm on plan and getting out all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm in any type of soil all as specified and directed.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point in any type of soil.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping etc. for poles complete all as specified and as directed.

M&L for PCC 1:3:6 type B-2 with 40 mm graded aggregate in foundation filling and mass concrete etc complete all as directed at site.

M&L for RCC M-30 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directed

M&L for form work to sides of rough finished concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed

M&L for RCC M-30 (design mix) in columns, pillars, piers, posts and struts etc complete all as specified.

M&L for form work to sides of Pillars, posts, struts, piers, columns and sanctions complete all as specified and as directed

M&L for RCC M30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed

M&L for form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc all spays between floors, and beams,etc complete all as specified and as directed

M&L for form work to edges of concrete flats, treads, breaks in floors, window cills,concrete railings, openings in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10cm wide and n.exc 20cm wide with rough finished surfaces complete all as specified and as directed.

M&L for RCC M30 (design mix) in Chajjas complete all as specified.

M&L for form work to chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and as directed

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed

M&L for TMT bars 6 mm to 8 mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire complete all as specified and as directed.

All as per item No 20.00 above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

M&L for form work for lintel, chajjas, slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

M&L for Moorum/Red Bajri Filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate in lintel up to 1.5 m clear span, cills, steps , seismic and other bands complete all as specified.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate in Chajjas complete all as specified.

M&L for treating the bottom & sides of excavation @ 5 Lit of emulsion per sqm of surface area complete all as specified and as directed

M&L for applying ATT on top of earth filling @ 5 lits/sqm complete all as specified and as directed

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L fpr precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

M&Lfor precast cement concrete solid building blocks 1:2:4 type B1 using 20mm graded stone aggregate 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:6 in walls complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only water proofing compound conforming to IS-2645 1975 complete all as specified and directed.

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as for floor surface complete all as specified

M&L for Non skid ceramic coloured tiles,Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in CM 1:3 as backing coat for fixing dado complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F Aluminium anodised (minimum anodization is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, glass & aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet pan glass fixed with ventilator in each pane complete all as specified and as directed.

Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 100mm butt hinges extruded brass, with mild steel hinge pin, bright polished type B-21 complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distempering over a coat of alkali resistant primer complete all as specified and directed.

M& L for preparation of newly plastered wall surface and applying two coat of whether proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and directed..

M&L for PCC 1:3:6 type C-2 using 40mm grade stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 110mm bore PVC (SWR) drain pipes complete all as specified and directed.

S&F 110mm PVC (SWR) bends complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed

S&F 15mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed

S&F vitreous china wash down water closet pan pedestal pattern of size 770x380x660 (EWC) (couple Closet) white in colour with and incl Soft close Seat cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and as directed

S&F 125mm dia PTMT gratings complete all as specified and as directed

S&F vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated, pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F 15mm bore pillar taps, cast copper alloy chromium plated, fancy type, screwed down, high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut complete all as specified and as directed

S&F decorative globes for curtain rails to be fixed at both end complete all as specified and as directed

S&F PVC waste pipe for Sink/WHB of 32/40mm dia 600mm long complete all as specified and as directed

S&F stop valves cost copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed .

S&F 15mm bore, 600mm long PVC flexible connection with CP brass nuts complete all as specified and as directed

S&F 15mm angular cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed complete all as specified and as directed

S&F 15mm bib tap cast copper alloy chromium plated, fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed

S&F towel rail 600mm long including chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms) complete all as specified and as directed

S&F Towel Holder Twin Type CP Brass complete all as specified and as directed

S&F telescopic hand shower (Health Faucet) (ABS Body) brass chromium plated with 1.0 Meter long easy flex tube including wall hook complete all as specified and as directed

S&F corner glass shelf high quality of 5mm thick glass & CP railing with bracket (any shape & any size ) complete all as specified and as directed

S&F 15mm two way bib cock heavy duty chromium plated complete all as specified and as directed

S&F 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

S & F MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed

M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed

M&L for preparing new steel/iron surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed

All as per item No 77.00 above but plain sheets as in ridges complete all as specified and as directed.

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

Excavation post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/ dense soil, Returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

M&L for PCC 1:2:4 type C2 using 40mm graded stone aggregate as in filling under post holed etc complete all as specified and directed

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as sub base complete all as specified and as directed

M&L for 40mm thick PCC 1:2:4 type B0 using 20mm graded stone aggregate as base complete all as specified and as directed

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde E-165 complete all as specified and as directed Note : Brackets over 10 kg each to be measured under 'Structural Steel

S& F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 10cm long complete all as specified and as directed

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium section complete all as specified and as directed

M&L for chequered cement concrete tiles mixed with grey cement and no pigment of size 300x 300 x25 mm thick set jointed and pointed in neat cement slurry in floors incl 20 mm thick screed in CM 1:4 complete all as specified and as directed

M&L for Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard & dense soil all as specified

M&L for Pre cast concrete coloured with glazed finish (Lacquered finished) external interlocking paver block of M-35 grade , having compressive str 30 N /mm2, 60mm thick of shade as approved laid dry over sand cushion of average thickness 50 mm duly consolidate, set and levelled the block in in proper level with interlocking laid in pavement complete all as specified and directed. Note : Including Sand Cushioning

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping for paver block surrounding complete all as specified and as directed

M&L for preparation of new concrete surfaces and applying two coat of synthetic enamel (Ordinary tint) paint with primer on road kerb surfaces / concrete surfaces of any description over 10 cm girth or width not otherwise described complete all as specified

M & L for point wiring with 1.5 Sq.mm (nominal area) pvc unsheathed multi stranded copper conductor pvc insulated 1100 volt FRLS grade multistranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface,in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

One light /fan point controlled by one switch

One 5 Amps plug point independent board controlled by one switch

One three pin switch socket 5 Amps plug point on same board

All as per item No 92.00 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed

All as per item No 92.00 above but with 4.0 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed

S&F socket outlet 2/3 pin 5 Amps 240 volts flush type complete all as specified and as directed

S&F socket outlet 3 pin 5/15 Amps 240 volts flush type complete all as specified and as directed

S&F switches 6 Amps 240 volts flush type complete all as specified and as directed

S&F switches 15 Amps 240 volts flush type complete all as specified and as directed

S&F ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed.

S&F LED tube light fitting, 1x20 w, 230v, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, flicker free, high efficiency and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mir deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I.Note: (i) Cost of GI earth strip and GI protection pipe up to 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning & filling, PCC chamber pit, RCC cover & test point.(iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required, as specified and as directed.

S&F DB SPN 8 way with category of protection double door type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCBs,all as specified and directed. Note : MCB DB shall be fixed in the wall such that front cover shall be seen flush with the wall surface

S&F DB TPN load line 8 way IP 43 IK-09 with metal double door suitable for provision of MCCB , 36 KA 160 Amp complete all as specified and as directed Note : MCB DB shall be fixed in the wall such that front cover shall be seen flush with the wall surface

S&F MCCB 160 Amps, 415V, 36KA 3pole with thimbles/lugs and nut,bolts complete all as specified and as directed

S&F MCB TP 40 to 63 Amps, 440 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed

S&F MCB DP 32 Amps, 415 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed

S&F MCB SP 6 to 40 Amps, 240V 50 Hz AC supply,10 KA C series complete all as specified and as directed.

S&F 300mm sweep exhaust fan, 240 volt, 1400 rpm, Opal, White/brown colour including making hole suitable size for fixing and making good to the disturbed surface including flap cover with all accessories complete all as specified and as directed

S&F 1200 sweep, 240 V ceiling fan HS décor 5 star rating, Opal White/brown colour including rod of minimum length 1.5 m and bush , nut bolts , capacitors including drilling on roof and fixed 1 to 1.5 feet rod and connecting bolts etc all specified

S&F step type fan regulator 220V single phase complete all as specified and as directed

S&F LED light fitting, 1x33 w, 230v, 2x2 recessed mounted general purpose square shaped luminaire with high transitivity diffuser suitable for office application with profiled & flat diffuser fitted on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

M&L for sub main wiring complete with 2x1.5 sqmm , single core , multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC Casing Capping in surface /PVC conduit in concealed/surface (as required) along walls roofs etc including 1.5 sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed Note:- Three cables should be run through for each individual circuit from the DBs. Three run of cable and one run of conduit shall be measured as one unit

All as per item No 115.00 above but 2 x 2.5 Sqmm and 1x1.5 Sqmm for earth wire complete all as specified and as directed

All as per item No 115.00 above but 2x4Sqmm and 1x 2.5 Sqmm for earth wire complete all as specified and as directed

S&F sheet metal enclosure with socket plug top single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed

Supply, laying and testing cable XLPE Insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and as directed

Supply, laying and testing cable XLPE Insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and as directed

Supply, laying of DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.

Supply, laying of DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 110 mm and inner dia 95 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.

S&F PCC concrete poles of 9 meter long having 152 mm x 152 mm at top and 152 mm x 260 mm at bottom with complete all as specified and as directed

S&F smart bright flood light fitting LED type, 100Watts 240 Volts luminous shall be more than >80 lumen/watt lumen, efficiency not less than 100 lm/Watt , PDC housing with IP 65 flood light optcs , efficient housing output LED sleek and robust design for better aesthetics ,highly efficient reliable and sturdy mounted on pole/wall including connection complete with angle iron of suitable size up to 0.60 mtr long fix on wall/pole complete all as specified and as directed

S&F FRP boxes with 4 connectors heavy duty, and clamps made out of FI 32 x 6mm and GI nuts, bolts , busbar chamber size 30x20 cm including provn of aluminium busbar SPN 30 Amps capacity fixed on porcelain insulator, 01 No MCB SP 6 Amps capacity complete all as specified and directed

Supplying, laying GI water tubing, medium grade, of 25mm bore confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in trenches / floors or fixed to walls / ceiling / roof etc including testing etc complete all as specified and as directed :

All as per item No 127.00 above but 50mm bore

S&F sluice valve suitable for 50mm bore pipe with stainless steel spindle and iron wheel head long body class PIN 1.6 complete with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-14846 complete all as specified and as directed

S&F Gun Metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of 25mm bore complete all as directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of 25mm bore complete all as directed.

M&L for Mild steel, plain, black sheet 3.15mm thick in cover to water tanks, cover to valve chambers, etc Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ,ladders, framed balusters; walk ways, railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc for supporting of tanks including necessary welding, grouting using PCC1:3:6 using 20mm graded stone aggregated and making good to surface complete all as specified and as directed

S&F Rotational moulded polyethylene (HDPE) 1000 ltr water tanks, cylindrical & vertical type, double layered, with 25mm bore tank nipple, ISI marked, hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete as directed.

M&L for cutting existing GI/DI pipe line of 50/80mm bore and making connection of 25 mm bore GI pipe complete all as directed

S & F 110 mm bore PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, including necessary fittings complete all as specified and as directed by Engr-in-Charge.

M&L for Reinforced cement concrete Design Mix M-30 (20mm graded aggregate) for Walls retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including pilasters and buttresses complete all as specified and as directed.

M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) in cover slabs with plain faces set in cement mortar 1:6 for drain, manhole & etc complete all as specified and as directed.

M&L for 80mm thick Plain Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) Nominal mix finished even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm PVC waste pipe laid in floors complete all as specified and as directed.

Excavating over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for broken PCC block filling complete all as specified and as directed.

M&L for 150mm thick concrete bed type D2 (1:4:8) Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to floors complete all as specified and as directed.

M&L for precast cover slab with 1:2:4 type B1 using 20mm graded stone aggregate including cost of use and waste of clean sawn wooden form work but excluding cost of reinforcement all as specified incl removal of existing unserviceable cover slab complete all as specified and as directed.

Kathir Marketing Services

BISAKHA PLUMBING WORKS