PROVN OF WAITING ROOM AT DIAV (AWPO) OFFICE , LED SECURITY LIGHT AT AD REGT, COPPER CONDUCTOR WIRING AT P-3 BAIRD PLACE , E/M WORK AT T-78 AND T-79 AT RPSO COMPLEX ADDN /ALTN TO BLDG NO P-18 POLO ROAD AND SPL REPAIR TO BLDG NO P-8 AND P-9 AT MALL ROA

Amount

Taking down chowkhats or frame with shutters N exc 1.5 Sqm ditto but with shutters (without taking off shutters from the frame)each complete all specified and directed.

Taking down chowkhats or frame with shutters exc 1.5 Sqm and n exc 4.00 sqm ditto but with shutters (without taking off shutters from the frame)each complete all specified and directed.

Taking up or down steel tubing with connections and cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

S&F for 35 mm thickness flush shutters, solid core construction, with particle board core and plywood face panels both faces covered with decorative face veneer with lipping incl edge to match frame complete all as specified and directed.

S&F SS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F aluminium anodised handle cast type of extruded section 125 mm long fixed with screws.

S&F aluminium anodised sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete

S&F for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

M&L for mild steel work in door chowkhat, bands, straps, holdfast, hook and pintle hinges conforming to Fe-410-0 or Fe-310-0 complete all as specified

M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) for cooking plateform,steps,jambs,pillars,window cillsand like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete.

Provn of making hole in marble/granite slab of cooking plateforme for cooking gas pipe etc by means of drilling machine all as directed.

S&F fancy type brass chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete

S& F Fancy type angle valve with flange cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, fixed in repairs, complete all as specified and as directed.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.

S&F Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg, CP flange etc., fixed in repairs, complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 300 mm long complete.

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete.

S&F Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No 192055 or equivalent in Jaquar/Somany/Cera as approved.

Vitreous china one piece counter top wash basin, white , of size 410 x 410x160 mm including coupling, bottle trap/waste pipe, fixed in repairs, complete all as specified and directed.

S&F in repair vanity box of HDHMR of size 580x450x680 mm with Mirror Cabinet of Size 500x700mm with table top basin complete all as specifies and directed. Make- Amara in Parryware Main Cabinet C896146 Mirror Cabinet C896C46 or Equivalent in Kohler or Marc

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

S&F Precast Prefabricated cement concrete column of requred size and shape suitable with proper size channel for fixing of Pre Fabricated RCC wall pannel of requred size as per site requirent including fixing of cloumns to a required depth as per manufacture's instruction incl demolition of existing Rcc column/ copping complete all as specified and directed Note : The excavation of post holes, fixing with PCC Type B1- 1:2:4 and making good surface is included in Quoted rates.

S&F Precast Prefabricated cement concrete panels 50mm thick size and shape suitable for fixing with Prefabricated RCC column as per site requirent including fixing with cloumns as per manufacture's instruction incl demolition of existing RCC panel complete all as specified and directed.

M & L for Wooden coloured interlocking tiles (Wooden Flooring) 1215mm x 168mm x 8mm thick rectangular fixed in floor/dado laid over existing floor with foam sheet of approved best quality including joint/end covering strip including all other fixing materials complete all as specified and directed. (Make : Kajaria catlog No AC 3 or equivalent in Cera/Somany).

S& F Fabrication of Machine pressed kitchen cupboards, cabinets, drawers, shelf, shutter etc made of 18mm thick BSB HDHMR board of front faces glossy finish other action tesa or equivalent with nails and adhesive including Auto/soft closing hinges (L/Bihari hinges) inclduing dismantling of exisiting complete all as specified and as directed by Engr-in-Charge.

S&F Telescopic channels 300mm long of chromium plated steel, superior quality with stainless steel ball rollers for fixing to cabinets drawers. complete all as specified and as directed

100mm size safety locks of brass 4 lever including keys set, complete all as specified and as directed.

Fancy type brass bright polished handles oval type of size 150mm size, complete all as specified and as directed.

Demolition of cement concrete in ground floors of any description and in any position not otherwise specifically provided (un reinforced) complete all as specified.

M&L Marble work (Udaipur green) 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl moulding the edges etc complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

S&F for WPC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam WPC sheet. The panel & strips shall be Density of 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm (±0.25 ) thick WPC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including all fixing assecerories,moulding,corner beads Make- rajshree or equivalent

S&F for Suspended Gypsum board ceiling works in decorative steps including vertical/sloping members includes with GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) alongwith perimeter of nailing screw fixed in brick wall/RCC with the help of nylon seelves and screws at 610mm centre, then suspending GI intermediate channels of size 45mm (0.9mm thick with two flange of 15mm each) from the soffits at 1220mm centre with GI cleat and steel expansion fasteners, ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres, 12.5mm tapered edge gypsum board conforing to IS 2095 (1982) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centre,. Screws fixing is done mechanically either with screw driver or drilling machine with suitable attachment finally the board are to be jointed and finishing the tapered and square edges of the boards are to be joints compound, joint fiber tape including dismatling of old false ceiling any description. Note :- Details of fixing & material will be got approved by GE before commencement of work.

Taking down cement plaster on brick or stone walls, etc including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15mm thick plaster on wall in CM 1:4 finished even and smooth without using extra cement complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 300x 600x 7 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles including 10mm thick rendering in cement mortar 1:5 including dismantling of existing tiles complete all as specified and as directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for 1st quality Jointfree ceramic coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) as in Ground floor complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation/under floor complete all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in chajjas etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complet all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete complete all as specified.

Formwork to chajjas, chullah hoods, similar items including edges all as specified.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed.

Providing and injecting chemical emulsion choloropyriphos 20 EC for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfaceantitermite treatment,/Treating the soil under plinth protection incl drilling & plugging complete all as specified and directed by Engineer- In- charge.

Providing & injecting chemical emulsion choloropyriphos 20 EC for treating the soil along with external perimeter of building/along the perimeter at plinth level at the rate of 2.25 litre of emulsion per metre of the perimeter wall antitermite treatment along external wall below concrete apron using chemical emulsion @ 2.25 ltr per linear mtr incl drilling & plugging holes etc in apron (300mm Apart) complete all as specified and directed by Engineer- In- charge.

Filling under floor spreading, leveling in layers n.exc 25cm thick well ramming including watering complete all as specified and directed by Engr-in-Charge.

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass and stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary Frame,joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.

S&f stainless Steel (S-304) work as in tubular pipe such in ,balluster, railing,Grill work etc fixed with suitable arrangement as required complete all as specified and as directed.

Cutting openning through brick wall built in CM for door and window and other openning or enlarging existing openings,converting window into door opening etc or cutting out defective brick work for under pinning including providing fixing and removing shoring ,cleaning and stacking brick including removal of debris and rubbish out side MoD land complete all as specified and directed.

Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture design and patterns having moisture content less than 2%,humadity resistance of 99%,NRC 0.85(with 50mm thick glass wool) as per IS 8225 :1987,Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizantal level suspended on inter locking metalT-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised@120grams per sqm including both sides) comprising of main -T runners of size 24x32 mm of length 3000mm.cross-T of size 24x26mm of length 1200mm and secondary intermediate cross T of size 24x26 mm of length 600mm to form grid module of size 600x600mm,suspended from ceiling using galvanised mild steel items(galvanised@80 grams per sqm) i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, complete all as specified and as directed.

M&L for applying of two coat of plastic emulsion paint on wall surfaces over and including a coat of priming over putty surfaces complete all as specified and directed.

M&L 10 -12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying designer wall paper roll / Texture paint of approved shde / colour /design applied over and including 2 - 3 mm wallcare putty and priming coat complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint incl 2 mm thick wall care putty etc complete all as specified and directed.

S&F fancy type Curtain rods decorative type stainless steel 25mm nominal dia and 3 mm thickness of approved quality (Make VISTA) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as directed and specified.

M&L Liquid Water Proofing compound

M & L for 15 mm thick screed bed or bedding layer of cement mortar 1:4 on brick work or concrete surfaces using water proofing compound, from 1st to 4th floor including necessary scaffolding and safety, complete all as specified and directed

Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable inish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

M&L for precast machine pressed cement concrete tile size 250x250x20-25 mm or 300x300x20-25 mm thick confirming to IS:1237 laid over & including 15 mm thick screed bed or bedding layer of cement mortar 1:4 and jointed & pointed with CM 1:4 complete all as specited and directed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

M & L PVC bend 110mm bore any radius complete all as specified and directed by Engineer- In- charge.

M&L coloured vitrified tile 10mm thick Double charge(Designer type as approved by GE) (square/rectangular) polished, area of each tile exceeding 0.16 Sqm but not exceeding .36 Sqm in floors laid over and including screed bed of 15mm thick in CM (1:6) etc set and jointed in neat cement slurry and pointed white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramiccoloured tile 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded aggregate as in floor/Plinth protection finished surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under floors, cable cushion or in foundations including watering and consolidation complete all as specified and directed by Enge-in-charge.

M&L Pre polished coloured Chequered cement concrete tiles 300mmx300mmx25mm thick, set jointed with coloured cement and pigment and pointed in neat cement slurry in floors, pavements etc incl 20 mm thick CM 1:6 complete all as specified and directed

M&L Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in bed blocks for hold fast, coping, foundation benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed upto two storey height.

Dismantling/ taking out of existing roof tretment with APP membrane of any thickness including taking out existing sreed bed / rendering of any thickness wth all necessary arrangements complete all as specified and as directed.

M&L for PCC 1:2:4 type B -1 (using 20mm graded crushed stone agregate) as in roof slop and required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor here required to match the existing surfaces rounded orchamfered on edges complete all as specified and directed.

M&L for preparation and applying two coats of aluminium paint over APP based polymetric membrane with required finishes complete all as specified and as directed.

M&L for Rendering 5mm thick with water proofing compound in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement in ceiling complete all as specified.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all specified and directed.

M&L for preparing New plasteres surfaces ceiling and applying of Birla/JK white wall care putty approx 2 mm thick on ceiling as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer painton ceiling complete all as specified and directed.

M&L for preparing New plasteres surfaces Wall and applying of Birla/JK white wall care putty approx 2 mm thick on Wall as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer painton Wall complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed. (Note :- work to carried out in G + 8 storries and rates are including for the same complete all as specified)

S&F 35 mm thick , 2nd class hard wood factory made, rail and style, plain framed, panneled shutter (three panel) lock rail and panel of 12 mm BWP ply commercial on both faces. The size of rail and style as per IS-1003 (part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed.

S&F factory made steel window with side hung shutter incl boxtype hinges with pressed steel handle, and steel peg stay with glazing bars, devetailed or welded including one coat of red oxide primer complete. Make - Shivmular or equivalent.

S&F factory made steel ventilator with top hung shutter incl hinges, steel peg stay including one coat of red oxide primer complete. Make - Shivmular or equivalent.

S&F MS framed work such as grills, gate ang guard bars of window and hung as gates, including pintle hinges, stops, hand-made sliding bolts,similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) including one coat of red oxide primer.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm shutters. complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4 type B-1 (20 mm graded stone agg) as in Floor base finished even and smooth at top without using extra cement etc complete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator socket and light fittings etc complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through existing PVC surface/concealed conduit including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl new Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size in and and making good surface etc complete all as directed for the following.

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

All as per srl item No 114 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire on independent board.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.

S&F Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S&F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.

M&L electric bell of , 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.

S&F Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

S&F in eplacement of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Material and labour in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to existing PVC conduit with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified.

Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to existing PVC conduit with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to AC point complete all as specified.

M&L in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 6 Sqmm ISI marked in service connections, including taking down old unserviceble cable, complete all as specified and as directed.

M&Lin replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed.

M&Lin replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed.

S & F of Galvanised steal water tubing mediume grade of size 40mm bore.cut to length for garden light /road crossing complete all as specified & directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 02 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

S&F in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as specified and as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement of MCCB, 415 volts, three pole of cap 125 Amp, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as specified and as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 63 Amp, SPN type complete all as directed.

Supply and fixing LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.

Supply and fixing LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.

S&F LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and as directed.

S & F in replacement of commet wall mounted light fitting fancy type with incl LED lamp 9W,ballast with fixing accessories complete all as specified and as directed.

Supply and fixing LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Replacement of post top lantern light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable mounting on 32/40 mm GI pipe including necessary electric connections complete all as specified and as directed.

Replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt including LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as specified and as directed.

S&F in replacement of Static Energy Meter three phase electronic type with LCD display of capacity 10-60Amp including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard. complete all as specified and as directed.

M&L in replacement of Geyser 25 litre capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to MES store yard complete all as specifed and as directed.

S&F in replacement of ceiling fan 1200/1400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to MES store yard, complete all as specified and as directed.

S&F in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as specified and as directed.

S & F in replacement of Exhaust fan 300 mm sweep metal type, incuding built grill and making all electric connections complete and depositing the old u/s to MES store yard complete all as specified and as directed .

M&L in replacement ventilatiing fan 200mm sweep 230 volt AC plastic body with self closing louvers and all fixing arrangements complete all as specified & directed.

M&L earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 8 mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as specified and as directed.

S&F of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, including connecting complete all as specified & as directed.

S&F of Modular Telephone socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.

S&F of Modular TV socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.

M&L in Replacement of TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit, complete all as specified and as directed.

M&L in Replacement of telephone Wiring with twin core PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in separate concealed PVC conduit, complete all as specified and as directed.

S&F in replacement of change over switch off load type, AC, 415Volts, TPN, 100 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.

Material and labour in replacement for Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to PVC conduit with and including 6.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main complete all as specified and as directed.

M&L in for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked with and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets/fan regulator etc , of suitable size covered with 3mm thick hylem sheet complete all as directed.

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 3 pin 5 amps on the same board.

(c) one socket outlet point 3 pin 5 amps on the independent board.

All as per srl item No 159 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire.

All as per srl item No 159 here-in-before but with 4 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.

Supply and fixing of Switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

Supply and fixing of socket outlet two-in-one, 3 pin, 5/6 Amp universal type complete all as directed.

Supply and fixing of Switch16 Amp,single pole one way complete all as directed.

Supply and fixing of socket out let 2 in 1 3 Pin, 6/16 Amp, flush type complete all as directed.

Supply and fixing of stepped type electronic fan regulator flush type,120 W in step and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed

S&F PVC batten holder including 9W LED bulb all as specified and directed.

Taking down the existing outdated 4 x 18W FTL Security Light from various bldgs except bracket and taking credit complete all as specified and as directed.

S & F of wall mounted light fitting, metal body, fancy type with opal glass diffuser including 9W LED lamp, ballast etc and making all electric connections complete all as specified and directed.

Supply and fixing in replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Usha/CG/V Gard/Khaitan/CR/Leader.

S&F MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Providing &Fixing of factory made kitchen cupboards (lower and upper unit) made up of 18mm thick HDHMR board (century/Action tesa/kitply) with both side company pasted (any colour) and 18mm HDHMR board with white colour on both sides, front shutter/ partitions shall be made of machine cut 18mm MDF board with laminates (merino/century/kitply) duly lipping (edge bending) complete all at the factory with G profile handle of approved colour and soft closing hinge (Hettich/Godrej/IPSA). (Note: No edge bending will be allowed at the site (Measurement shall be of front face only)

S&F for Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

S&F for Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply only Stainless steel bottle full out of size 50cmx40cmx16cm in two tier made of 4mm thS.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20'' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge (Make: Godrej or IPSA/ Hettich as approved by Engr-in-Charge).

VIKRANT CONSTRUCTION CO.

Akhil Enterprises