2 works at Unjanai Panchayat in Elachipalayam Block of Namakkal District under Road Speed Break Panchayat General Fund 2026-27 P1

Providing Speed Breaker at TN Road to Merkkukattuvalavu road via vivekandha college Road (R - 499) R/S H/O Unjanai

Providing and laying Tack coat over Existing BT surface using 2.0 Kg of bitumen emulsion RS-1 for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,

BITUMINOUS CONCRETE 25/30/40 MM THICK USING cmp (Grade-II) Providing and laying Bituminous Concrete to 25/30/40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete

Providing and laying of hot applied Thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803 including cost and conveyance of materials and labour charges etc complete.

Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly carbonate / methyl methecrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RA/NH. 33023/10/97-D0.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a C1L not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not. less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf etc., complete.

Providing and fixing of Retro Reflectorised cautionary mandatory and Informatory signs ( without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type IV of IRC 67-2012 and ASTM D 4956-09, Specification and fixed over 2.0 mm thick Aluminium sheet fixed on back supporting frame of 25mmX 25mm X 3mm mild steel angle iron post 75mm X 75mm X 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of refro-reflection as per Table 6.6 of IRC 67-2012. the rero - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (as per MOR&H Specification No. 801).

90 Cm Equilateral triangle (Major road ahead) sign Board

90 Cm Equilateral triangle (Speed Breaker) sign Board

90cm Octagon

Providing Speed Breaker at T.N road to Ulagappampalayam km 0/0-1/550 (R - 380) L/S H/O Unjanai