COMPREHENSIVE REPAIR/MAINT AT ENGR BDE, FD WKSP (ME LINE), ENGR BDE SIGNAL SECTION, DIV PRO UNIT AND ADJOINING AREA UNDER GE PANAGARH

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in CM (1:6) Complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM (1:4) complete all as specified and as directed

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in CM (1:3) on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM (1:6) on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engr-in-Charge. (Note : WPC measured and paid separetely)

Supply only integral Liquid water proofing compound complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of any description from old plastered surfaces of ceilings and applying two coats of white wash including preparation complete all as specified and as directed.

M&L for two coats of Acrylic distemper over a coat of alkali resistant primer newly plastered surfaces of walls of any description including preparation of surfaces all as specified and as directed.

M&L for preparation of old decorated surface of ceilings incl washing, rubbing down and stopping and applying one coat of Acrylic distemper (White or tinted) complete all as specified and directed.

M&L for complete removal of existing treatment of any description on old wall surface and applying 1 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion distemper over a coat of alkaly resistance primer complete all as specified and as directed.

M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior alkali resistance primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior alkali resistance prime applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for preparation of new surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new painted steel and iron surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted surface of concrete or brick or stone surfaces etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 75 mm thick PCC type B-1, (1:4:8) using 20mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 100 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed.

M&L for 40 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor finishe scomplete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for screed or bedding layer 15mm thick in cement mortar (1:6) laying floor finishes complete all as specified and as directed.

M&L for Rendering 10mm thick in cement mortar (1:4) finished even and fair on vertical surfaces on walls complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

M&L for Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

M&L for Vetrified Ceramic tiles (double Charged) 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over plaster & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana Adanga complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub floor/sub base/ plinth protection etc complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n.exc 4.0 sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Powder coated aluminium (miimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engr-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Chargeher for openable/sliding shuttters) including all necessary fittings as directed

S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F brass 4-levers mortice lock, vertical type , size 100mm complete all as spcified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and as directed.

S&F Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S&F Chimney bars (straight or camber); bearing bars; ton-gues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc., & similar articles conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

S&F in repair Mild steel, plain black sheet 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs & funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets & fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets,etc complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid moulded PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face with particle face supply & fixing on frame, as per specification & drawing complete all as specified and as directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F stainless steel Butt hinges 100mm size, medium weight, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and as directed.

S&F in repair anodised extruded aluminium handle size 150 mm long fixed with screw complete all as specified and as directed.

S&F in repair anodised aluminium barrel tower bolt of size 200 mm long fixed with screws complete all as specified and as directed.

S&F in repair 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm, complete all as specifed and as directed.

S&F for hangers 4 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means ceilings cleats made out od GI flat 40x3 mm size 60 mm long and expansion hold fastners 12.5 mm dia, complete all as specifed and as directed.

S&F 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work, complete all as specifed and as directed.

S&F Solid PVC prelam wall lining consisting of 5 mm thick Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Dismantling of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge

S&F Rolled mild steel in main and cross beams, (as in posts/purlins/rafter) where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as required and directed conforming to Fe 410-W (Gde E-250 quality A) complete all as specified and as directed.

Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including translucent sheet complete all as specified and as directed by Engr-in-Charge complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc. of 2mm thick complete all as specified and as directed.

S&F Plain galvanized 1.20mm thick mild steel sheeting in ridges, hips valley gutters, drip & straight flashing (length & girth as fixed) with grade of zinc coating 275 including welding and sealing the gaps with APP, complete all as specified and as directed.

M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium/wooden frame work complete all as specified and as directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing and making good of groves for concealed GI tube, cutting not exc 10cm girth complete all as specified and as directed.

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl P or S trap and plastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed

S & F in repair plastic water closet white seat cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed.

S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S&F in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified complete all as specified

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

S&F in repair chromiuim plated Swivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc complete all as specified and as directed.

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed.

S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and as directed.

S&F in repairs waste coupling of 40mm dia brass chromium plated for glaze ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specfied and as directed

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed

S&F in repair fancy type C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and as directed.

S&F in repair chromium plated 15 mm central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and as directed.

S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and as directed.

S&F in repair fancy type 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe fixed in repair complete all as specified and as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed.

S&F in repair Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repair soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe) including providing fixing plugs bedding urinal against wall etc all as specified and directed .

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

M&L for Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified.

S&F factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engr-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted complete all as specified.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and directed.

S&F in repair 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary filling the gap with slicon or other suitable material complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repairs flexable PVC waste pipe 32 dia of length 900m m PTMT complete all as specified and as directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement from roof surfaces complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L one coat of aluminium paint over APP membrane complete all as specified and directed.

M&L for providing water proofing treatment with a layer of APP based polymeric membrane, 3 mm thick (minimum), weighing not less than 3.60 kg/Sqm reinforced with polymer non woven fabric (weighing not less than 160 gm/ Sqm) shall be applied over one coat of cold bituminious primer @ 0.40 ltr/ Sqm ( membrane shall be laid using butane torch and sealing all joints etc, complete all as specified and directed . (Note: The overlaps shall be of minimum 75 mm on longitudinal direction and 100 mm on transverse direction) complete all as specified and directed.

S&F in repairs Vitreous China Ware Wash hand basin white flat back with pedestal pattern, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified complete all as specified

S&F factory made single extruded WPC (Wood Polymer Composite) wire gauzed i.e. panel/ flush shutter will be wire mesh in lieu WPC , the wire gauze shall be warped on additional square 8mm MS Solid tube and this tube shall be welded to MS frame complete all as specified and as directed.

M&L for applying two coats of Super Latex (Sika or equivalent) over internal/external of brick/concrete surface after cleaning the surface by wire brush The entire surface shall be washed throughly with plenty of water and then allowed to dry. Note:- The entire process executed by authorised applicator.

M&L for 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with aluminium tapperd clip to aluminium frame work all as specified and as directed.

S&F in repair rubber neoprene packing suitable for aluminium doors & windows for fixing glass etc complete all as specified and as directed.

M&L for Charges for taking down of aluminium door shutter area exc 1.0 sqm but n exc 2.0 sqm and refixing the shutter in same opening after necessary repair/adjustment/easing or adjusting hinges with screws/pivot/door spring/door clouser complete all as specified and as directed.

M&L for Charges for taking down of aluminium window shutter area n.exc 1.0 sqm and refixing the shutter in same opening after necessary repair/adjustment/easing or adjusting hinges, roller, handle with screws complete all as specified and as directed.

M&L for Charges for taking down and refixing of iron door any size including minor repair, welding in repair, repair of mild steel pin and finally one coat of synthetic enamel paint over old steel surface complete all as specified and as directed. (Note: MS Plate and Angle iron section if required paid seprately)

Dismantling/taking down u/s parts of steel rolling shutters (self closing types shutters i.e push pull with gear operating type mechanically or motor operated) area n.exc 20 sqm each and for repairing and overhauling of rolling shutters and greasing/oiling of member of rolling shutters and finally painting with synthetic enamel paint (two coats) after preparation of steel surface complete all as specified and as directed. Note:- i) Refixing/welding of rolling shutters duly repaired/overhauled/welded/painted shall be deemed included in quoted rates.ii) Fixing of new parts of rolling shutter shall be deemed included in quoted rates. iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supply only under the relevant item iv) Make/size/specification of new parts of rolling shutter as per existing specification of rolling shutters. v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified and as directed.

Supply only safety lever locks and gear mild steel with 4 levers for rolling shutters complete all as per existing make complete all as specified and as directed.

Supply only MS sheet 1.25 mm thick for hood cover complete all as specified.

Supply only helical wire spring or cladd spiral spring complete all as specified.

Supply only ball bearing (ISI) Marked size and make as per extng old type complete all as specified.

Supply only MS 40mm bore heavy weight for suspension shaft complete all as specified.

S&F in repair soft closing 'O' Degree high grade mild steel, bright finish or electro galvanised for cup board shutter complete all as specified.

S&F in repair magnetic catcher for kitchen cabinet shutter as approved by Engr-In-Charge.

S&F in repair C.P bib taps long body cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and as directed.

S&F in repair Pillar taps (Swan Neck)fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair dropery rod powder coated 25mm internal dia with fancy type brackets and side knobs as per sample complete all as specified and as directed by Engr-in-Charge .

S&F in repair stainless steel 1mm thick kitchen plate rack(24''x24''x10'') including necessary fixing/fitting & making good the existing surface complete all as specified and directed .

S&F vitereous china wash down water closet pan size 660x350xx700 (singe pice suite),white (including fixing bolts,flushing cistern and flush pipe connection to drain(or outing going pipe) and to flushing pipe anti syphonage pipe etc. including taking out of existing one and making good disturbed surfaces as per existing specification complete all asspecified and directed.

S&F in repair wall mixer cromium plated 3 way including telephonic shower arrangement with connecting legs, wall flanges & wall bracket for hand shower all as specified.

S&F in repairs two way bib cock 15 mm chromium plated 1 mm complete all as specified and directed.

S&F in repairs jet spray (stainless steel) coral neo with hose& hook complete all as specified and as directed.

M&L for high built repair ready mix mortar or concrete to expose corruded reinforcement of chajja/ facia /beam/ column/slab/ RCC wall with bonding agent as per manufacturer instruction (Fosroc/Sika/Pidilite/BASAF) proper compaction and finished to proper level upto a depth of 75mm with and including provision of formwork to the affected portion at any height including all necessary scaffolding and safety measures all as specified and as directed.

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated complete all specified

M&L for Attending complaints of internal water supply pipes and fittings for removing of blockages etc of any description incl removing & clearing of air locks etc, by pressure pump or any other means including taking down and refixing of pipes and fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed Notes:-New pipes and fittings replaced if any shall be measured and paid seperetly.

M&L for Petty repairs to plumbing/internal water supply works such as repair to leaking taps, pillar taps mixer, stop cocks etc by tightening and providing washer ,repair to float valves, low level cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket union etc as required at site all as required at site all as directed by Engr-in-Charge. Note:- (i) Items replaced shall be paid separately at S&F rates and attending for the same shall not be counted and paid under this item. Note:- The complaints are to be attendedat almost priority and delay will be penalised as mentiioned in Particular specification.

M&L for repair to crack portion with jacktting technique, taking down existing plaster up to brick wall surface of min 200 mm wide, cleaning to loose particles on surface of brick work along the length of crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5 mm aggregate up to brick surface and inserting the welded mesh of size 25 x 25x 2 mm dia along the crack on both side of the wall surface fixed with, drilling holes 10 mm dia on either side of the crack by means of drilling machine through out the full width of the wall @ 25 cm c/c and insert 8/10 mm dia rod in the drilled holes, welded with horizontal rod to with hold the welded mesh and applying grit plaster 1:1:2 using 4 mm and down aggregate finished even and smooth without using extra cement complete all as specified and directed. (Note: Reinforcement and welded mesh will be measured and paid separately )

S&F in repair Turbo ventilator SS built with vane ticknes 0.9mm, 38 nos aprox with ball bearings, turbine dia 760mm with bottom ring dia 600mm , FRP Base plate 2mm thick clear 1.02mtr wide and 1.65 m long matching the profile of existing sheet, weight approx 8.0 Kg complete all as per manufacturer instructions and as directed

S&F in repair Venetian blinds zebra or Roller style for window complete all as specified and directed.

S&F in repair SS Double Handle of size 250mm long fixed in toughned glass door complete all as specified and directed.

M&L for out door Vitrified parking tile of size 40 x 40 cmx 10mm/12mm thick complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanized wire staples, complete all as specified and directed.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S&F in repair 550 x 400 x 225 wall hung wash basins with full pedestral ivory/ superior colours height 820mm all as specified (cat No. S2040103 Wash basin of Make Cera or equivalent and cat no. S2090101 pedestral of Make cera or equivalent make) all as specified and as directed.

S&F in repair 4mm thick figured glass , pin head type and glazing with oil putty or with brass screw in square n.exc 0.5 sq.m in each pane for bathroom toilet ventilators etc complete all as specified and as directed.

Supplying and laying of 16mm bore CPVC, SDR 11 plain/brass threaded fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supplying and laying of 20mm bore CPVC SDR 11 plain/brass threaded fittings and fixed complete to walls and ceilings or laid in floors pipe complete all as specified and as directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) cement concrete of any description and in any position not otherwise specifically mentioned all as specified and directed.

M&L for reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) (nominal mix) slabs supported on walls, beams and columns in floors, roof , landing balconies, canopies, deck slabs and in sheles and the like complete all as specified and as directed.

Use and waste of formwork, soffits of flat fair finished of suspended slabs surfaces such as in roof slabs, floor slabs landings and similar work n.exc complete all as specified and as directed.

M&L 20mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down the wooden shutter/ window/ iron gate and refixing in position after welding(exc 6mm but n.exc 9mm) in repairs exc 1Sqm but n.exc 2 Sqm in length complete all as specified and as directed.

S&F PUF (Poly urathane Foam) inslulated sandwich pannel in between galvanised steel sheet of 0.5 mm thick pre painted both sides (minimum) fixed to roof with self tapping screw etc complete all as specified and as directed.

E/M PORTION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material and labour point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and caping (ISI marked) , including pressed PVC terminal sutable for modular, top cover (ISI Marked) 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc complete all as specified and directed.

All as per item No 170.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.

All as per item No 170.00 above but 5 Amp socket on Independent board with other switches complete all as specified and directed.

All as per item No 170.00 above but one bell point with other switches complete all as specified and directed.

M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and caping (ISI marked), including pressed PVC terminal sutable for modular, top cover (ISI Marked) 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc complete all as specified and directed.

S&F in repair switch piano flush type, single pole, 5/6 Amps, one way complete all as specified.

S&F in repair socket outlet 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch duly marked complete all as specified and directed.

S&F in repair socket combination outlet 2 in 1 multipurpose 5 pin, (6 Amps) flush type 230/240 Vcontrolled by one switch duly marked complete all as specified and directed.

S&F in repair switch 16 Amps, 230/240 V complete all as specified and as directed

S&F in repair socket outlet 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F in repair ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.

S&F in repair Bell push, flush type, 5 amp duly marked complete all as specified and directed.

S&F in repair Ding dong, AC 230 Volts, single pole 230 volts complete all as specified and directed.

S&F in repair lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed.

S&F LED light fitting 1x 20 W LED polycarbonate with LED tube rod light AC decorative box type 4' with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed .

S&F LED luminaire 600x600mm 40 watt 220volt AC reccessed type with high effiency PMMA diffuser soft glare free light complete with driver ,holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed by Engr-in-Charge.

S&F in repair 12 watt surface mounted round LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclousers, with separate replaceable constant current driver for grid ceilling including electrical connection all as directed by Engr-in-Charge.

S&F in repair 15 watt surface mounted round LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclousers, with separate replaceable constant current driver for grid ceilling including electrical connection all as directed by Engr-in-Charge.

S&F wall security light fittings 35 watts 230v, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and directed.

Taking down fan,exhaust Pvc body and repair and replacement of unservicable broken body complete and fixing of connecting sealing cable and S&F in new Pvc body of suitable size 200/250 mm plastic body of existing exhaust fan including electrical connection all as directed by Engr-in-Charge.

S&F sheet metal enclosure with 20 Amp MCB and two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.

S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing and caping (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

S&F submain two single core, 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC casing and caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed. Make :- Havells or eqvt Note: all wire connection with suitable sizw copper lugs complete all as specified and directed. Make : Havells/ABB/legrand.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed. Make : Havells/ABB/legrand.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Make : Havells/ABB/legrand.

S&F in repairs MCB SP 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : Havells/ABB/legrand.

S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : Havells/ABB/legrand.

S&F in repairs MCB SPN 63 Amps, 'C' series 16kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). Make : Havells/ABB/legrand.

S&F in repair epoxy powder coated sheet metal enclosure for DBs double door (when Mcbs to be used ) single pole and neutral 240 V (VTPN) 4 Ways with mounting fitted with bus bar DIN channel neutral link and incoming contract complete all as directed by EIC. Make : Havells/ABB/legrand. Note: DB and Mcb,Mccb will be same Make.

S&F in repair MCCB 4 pole, 3 phase, 415 volt of capacity 63 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed. Make : Havells/ABB/legrand.

S&F in repair MCCB 4 pole, 3 phase, 415 volt of capacity 100 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed Make : Havells/ABB/legrand.

S&F Metal plug 20 Amp 3 pin for AC and geyser all as directed by Engr-in-Charge. Make : ABB/Havells/L&T

S&F Metal Socket 20 Amp 3 pin for AC and geyser all as directed by Engr-in-Charge. Make : ABB/Havells/L&T

Taking down and Repair/cheking and fixing only and connecting electric meters up to 25 Amp including cheking nutral phase ,earth wire etc all as directed by Engr-in-Charge.

Taking down and Repair/cheking and fixing only and connecting electric meters above 25 Amp including cheking nutral phase, earth wire etc all as directed by Engr-in-Charge.

S&F in repair bell , AC 230 Volts, single pole 230 volts all as specified and directed

S&F in repair switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F in repair socket outlet 2 in 1 multipurpose 3 pin, (6 Amps) flush type controlled by one switch duly marked complete all as specified and directed.

S&F in repair switch socket Combination 6 A/16A, 5 in 1 flush type with fuse & neon incator controlled by one switch two hole type complete all as specified and directed.

S&F in repair modular switch 1 way 6A one module complete all as specified and directed.

S&Fin repair Modular bell push 6A one module complete all as specified and directed.

S&F in repair modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F in repair modular Switch Socket Combination 16A, 6 pin, 3 module complete all as specified and directed.

M/S S M ENTERPRISE

KAZI SAHABUL ALAM

BISWAS ENTERPRISE

S.P.S. SUPPLIERS

SINGH CONSTRUCTION

S.D.ENTERPRISE

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION