PROVISION OF STORE ROOM AT DSOI AND ADDN ALTN TO EXISTING BOUNDARY WALL AT MH UNDER GE MIS MHOW

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for shafts, wells, cespits, manholes, pier hold etc not exceeding 10 Sqm on plan and getting out in had/dense soil complete all as specified

Excavating over areas not exceeding 1.5 m deep and getting out in hard / dense soil complete all as specified

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filing,sub base of floor etc complete all as specified

M&L for damp proof course 40mm thick in cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate mixed with and including WPC @ 2% weight of cement on horizontal or vertical surfaces including necessary formwork complete all as specified .

M&L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups ,spaces,nibs and binders including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified

M&L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 as in half brick thick walls complete all as specified

S&F Rolled mild steel joist , flats,channel, angle, square Bar as in window grills and steel racks and conforming IS-1161-1979 grade ST-240 complete all as specified Note: Design and Drawing of Window Grill and Steel Racks shall be provided during execution of work by Engineer in Charge as per site requirement.

M & L for for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finished surface of concrete complete all as specified.

M&L for RCC M-25 grade concrete (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, lintel, chajjas, over 1.5m span complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified.

M&L for hardcore with broken stone of gauge n exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M & L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for levelling course in floors complete all as specified.

M & L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified.

M&L for rendering 10mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface mixed with and including liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified

M&L for applying two coats of superior quality oil emulsion distember over a coat putty including preparation of surface complete all as specified Note:- Putty shall be measured and paid seperately under relevent item

M&L for two coats of exterior weather proof water base emulsion paint on new prepared surface of wall over primer of same make with putty complete all as specified Note:- Putty shall be measured and paid seperately under relevent item

M&L for preparation of new plastered surface of wall and and applying 2mm thick cement base wall care putty in two coats (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified

S&F PVC (SWR) pipe 150mm bore single socketed in any length half cut to use as valley gutter with proper fixing arrangement of mild steel strap as required at site complete all as specified and directed..

S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed / Glass and one shutter wire mesh) with following specification complete all as specified and as directed by Engineer-in-charge. (i) Windows frame of cross section 101mm x 44mm (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm (iv) 4 mm thick glass superior quality. (Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 No. (Min) (vii) Sliding rollers per shutter - 02 Nos. (Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 No. Note-:(a) Thickness of Aluminium Section shall be minimum 2 to 3mm 2.Drawing and size of Window shall be provided by Engineer- in -Charge as per site requirement.

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partitions with one or more rebates sections of approved tint as required for partitions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified

S&F aluminium coloured power coated Partition/ window / ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors / window /partition including necessary cutting / moulding and chamferrring of edges for service window counters complete all as specified

M&L for Machine cut Kota stone slab flooring 20 mm thick (+ 2mm) thick of 58cm x 58cm in size (or nearest size as available in the market) laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish complete all as specified

All as per item No 29 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified

S&F pre-colour pre- profiled (Galvalume/zinkalume) sheets AZ 150 0.50mm thick (including coated thickness) of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection and vertical section etc. complete all as specified

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for machine pressed rubber moulded coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including 25mm thick bedding layer of stone dust and joint filled with sand including locking of sides with PCC 1:3:6 type C1 complete all as specified

S&F Plain, galvanised, mild steel sheeting 0.63 mm thickness as in ridges,hips, valley gutters on roof,with grade of zinc coating 275 with all fixing arrangement complete as specified.

S&F PVC false ceiling consisting of 5 to 10mm thick Plain colour PVC sheet hollow section inclusive of required frame work and other fixing arrangement like screw as per specifications and drawing,complete all as specified and directed.Note: Cross section,Size,Thickness of PVC Panel shall be approved by Engineer-in- Charge as per site requirement

S & F Mild steel, plain black sheet 2mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, but in hearths; covering to door shutters; covering to door chowkhats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required complete all as spd and directed.

S & F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified

M&L for use and waste formwork to sides of concrete foundation footings, bases of columns raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work : vertical or to batter ,rough finished surfaces of concrete

M&L for RCC M 25 grade concrete (Design Mix ) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified NOTE : Reinforcement shall be measured and paid separately under relevant item.

M&L for use and waste formwork to sides of pillars, post, struts, piers, columns and stanchions , fair finished surface of concrete

M&L RCC M 25 grade concrete (Design Mix ) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified .NOTE : Reinforcement shall be measured and paid separately under relevant item.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified

S&F mild steel framed work such as grills, gratings, etc . with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars , barred iron doors , ladders , framed balusters , walk ways , railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

M&L for Point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping shall be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

All as per item No 46 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp 240 volt

S&F socket outlet flush type 5 pin, 6 amps, 230 volts

S&F switch piano flush button single pole one way 15 Amp 240 volt

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts

S&F ceiling rose surface bakelite three terminal

S&F integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro

S&F LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified

S & F MCB TPN 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified

S&F energy efficient exhaust fan of metal body 300 mm sweep Ventil Air -DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base and making good the disturbed surface to match with existing compelte all as specified

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I including excavation earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber with cement concrete 1:3:6 type C1 , 40 mm thick RCC 1:2:4 type B1 cover slab reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 4 core x 16 Sqmm complete all as specified

M&L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection complete all as specified.

Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat , size 250mm x 150mm x 40mm complete all as specified

Supply and lay galvanised iron pipe 'light Grade' 40 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings including sealing ends complete all as specified

NIDHI CONSTRUCTION

M/S Sunshine Construction

M/S DADISA CONSTRUCTION

yash enterprises

Chitragupta Construction

M/S UnitedConstruction

SATHI ENTERPRISES

sunway associates