Construction of 14 Nos. Class Room, 02 Nos. Examination Hall, Office Block and Toilet Block in Govt. Higher Secondary School at Dablehar, R.S.Pura (2nd Call)

Amount

Civil Works :-

Demolition of existing school building by way of disposal of unserviceable material as per direction of Engineer Incharge and reuse of serviceable material inculding clearance of site. The building (Double Storey) was constructed with foundation and superstructure of brick masonary in cement mortar and slab of RCC, door and window frames including shutters of wood where as walls are plastered outside/Inside with cement plaster and flooring is of cement concrete Bidder have to pay cost of the servicable material on account of salvage/reusable/scraped material retained by him to the department which shall be deducted from his contractor claim by the department. (Rate to be quoted by the contractor with minimum reserve bid of Rs. 11.50 Lacs) Complete job.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge in all kinds of soil.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:1:2 (Plinth Beam) 20 mm nominal size) Extra for providing M-30 grade concrete instead of M-25 grade BMC/RMC.

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand).

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in cement mortar 1:4 ( 1 cement : 4 coarse sand).

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases for columns.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide.

Lintel, beams, plinth beams, girders, bressumers and cantilevers with waterproofing ply 12 mm thick.

Columns, pillars, piers, abutments, posts and struts.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). Sal wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Second class deodar wood.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand).

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand).

12mm Cement plaster of mix 1 : 6 (1 cement : 6 fine sand).

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50 x 12 mm.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work (Steel works).

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete in colour such as White, Ivory, Grey, Fume Red Brown.

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm). 18mm/Sqm.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete. 300x16 mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x10 mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 100x10 mm.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws etc. complete.300x20x6 mm.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Jaquar).

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid (Jaquar).

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Jaquar).

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 32 mm dia.

Providing and fixing 100 mm sand cast iron grating for gully trap.

Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required.

Range of two half stall urinals with 5 liter P.V.C automatic flushing cistern (Jaquar).

Single half stall urinal with 5 liter P.V.C automatic flushing cistern (Jaquar).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm.

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete.

Providing and fixing toilet paper holder C.P. brass (Jaquar).

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing of green blackboard including all leads, lifts and carriage complete (complete job).

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks).

Providing and laying terrace water proofing with Dr. Fixit Pidicrete URP 301 for water proofing coating Ist cleaning and repairing of gola/cracks/voids adding Dr. Fixit pidicrete URP 301in ratio in 1 Bag cement : 4 Bag Sand + 5 Kg URP after repairing then water curing for one day. IInd Terrace waterproofing with Dr. Fixit pidicrete URP 301 dosage 1 part URP + 1.5 part cement (By volume) you can sandwich with lying of fibre mesh @ 5/Sqft also in between two coating of URP Apply first coat of Dr. Fixit URP 301 with Nylon brush and then apply second coat after 4 to 5 Hours.

Providing and laying water proofing treatment in sunken portion of WC’s bathrooms/ water tank etc. by applying cement slurry mixed with water proofing cement compound consisting of applying Dr. Fixit Pidifin 2 K 112.. 15 Kg (Two component.. 10 Kg Powder + 5 Ltr Liquid New/old const. water proofing for Bathrooms, Varandah’s / water tanks, kitchen and Terrace. Dr. Fixit URP 301 50 Kg pack for repairing of all plumbing Gaps/cracks/voids/Brick slip joints/gola etc. Ratio.. 1 Cement : 4 Sand + 5 Kg URP (Add URP 5 Kg / Bag of cement for all repairs). Turnkey Basis W.P. Job work @ 32/Sqft protecting plaster mush be laid over the coating after 4 to 5 days adding LW + 101 .. 200ml/bag of cement.

Providing installation and testing of geyser of approved quality and manufacture Havells / Bajaj oe equivalent all complete. 35 litres capacity.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall.

15 mm dia. nominal bore (Medium).

20 mm dia. nominal bore (Medium).

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). 40 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). 32 mm dia. nominal bore.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 25mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 50mm nominal bore.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diametre.

Providing and fixing of motor pump 1 Kw for aupply of water including all leads, lifts, carriage complete (Complete job).

Providing and fixing of 1.5 ton Blue star window AC with V-guard voltage stablizer including all leads, lifts, carriage complete (Complete job).

Providing and fixing OF Blue star 80 litre storage water cooler NST6080B/R including all leads, lifts, carriage complete (Complete job).

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone agg./Sand for an avg. lead of 25 Kms.

Brick for an average lead of 25 Kms.

Electrical Works :-

Supplying and fixing of following sizes of PVC conduit pipe along with bend and other accessories including cuttubg the wall and making good the same (ISI make) as per direction of Engineer-in-charge.

Supplying and fixing of following Electrical Acessories.

Deep Box.

Fan Box.

Supplying and fixing following size / modules, box along with modular base and cover for modular switches as per direction of Engineer-in-charge.

1 or 2 Module (75mm x 75mm).

3 Module (100mm x 75mm).

4 Module (125mm x 75mm).

6 Module (200mm x 75mm).

8 Module (125mm x 125mm).

12 Module (200mm x 150mm).

SITC of gunmetal Fire Brigade connection with collecting head 63mm, 4 way instantaneous type male couplings with flanged outlet complete with blank caps nuts, bolts and rubber insertions, conforming IS:904-1983.

SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire, 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses, instruments automatic isolator and auxillary switch including connectors complete as required for 1 main electric pump, 1 jockey pump and 1 spare etc as required for the system.

Supplying and laying of 4 core 10 sqmm Aluminium cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core 35 sqmm Aluminium cable from motor to electrical panel for automation of the system.

SITC of horizontally centrifugal end suction pump with bronze impeller capacity 1650LPM with 56 meter Head, 3R1040, model, RB44, with diesel engine 60 HP, 1800rpm, 12V water cooled with 125 mm suction and 100 mm delivery, with base frame, coupling, battery fuel tank, AMV pads etc complete as required.

SITC of horizontally centrifugal end suction pump complete for delivery 1650 ltr/min against a total head of 55mtrs. With 40 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

SITC of horizontally mounted centrifugal pump complete for delivery 180 ltr/min against a total head of 55mtrs. With 12.5 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe. (Rmt)

P/f shutter & frame for internal hose cabinet overall size 1.5 m wide x 1.80 m high comprising of thick M.S frame of 40mm thick M.S angle, with double leaf glazed shutter and 5mm thick clear glass with 3 nos. heavy duty hinges per shutter with locking arrangement including painting, the word 'FIRE HOSE BOX' to be painted on glass.

Supply and installation of weather proof hose cabinets fabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no. branch pipes as required.

SITC of air vessel 250mm dia and 1.5 mtr high withdished top, made of 6mm thick MS pipe complete with 25 NB dia gun metal air release valve, 20mm dia stop valve, 25 Nb gun metal pressure release valve, 49 NB drain valve, pressure guage and all accessories as req and painted.

SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.

S/l of 2 x 1.5 sqmm dia PVC insulated copper conductor armoured cable directly on the surface complete as req.

Providing & fixing ABC type fire extinguishers 4 Kg cap. Complete with discharge arrangement, high pressure hose pipe complete as req.

Providing & fixing CO2 type fire extinguishers 4.5 Kg cap. Complete with wheel valve arrangement, high pressure wire Braided hose pipe as req.

Supplying and fixing a set of GI fire bucket with round bottom each set comprising of 4 Nos of buckets each of 9 ltr cap. Including fixing suitable brackets in the hook for holding buckets painted with red paint & filled of sand in 2 buckets of each set.

Supplying and Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (ISI Make).

Supplying and Fixing of following Electrical Accessories.

Deep Box.

Fan Box

Supplying and fixing following size/modules , GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm x 75mm).

3 Module (100mm x 75mm).

4 Module (125mm x 75mm)

6 Module (200mm x 75mm).

8 Module (125mm x 125mm).

12 Module (200mm x 150mm).

M/S VED PAUL DEWAN

m/s prem nath