Construction of Main Gate (Entry and Exit), front boundary wall and raising low site in front of the New Assam Legislative Assembly Building depicting all Assamese Cultural Heritage etc. at Dispur, Guwahati-6

Amount

Earthwork in excavation for foundation trenches of walls,retaining walls,footings of column,steps,septic tank etc.including refilling (returnfilling) the quantity as necessary after completion of work ,breaking clods in return filling,dressing,watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. With rivers and or silt (predominantly non plastic) by truck carriage including loading and unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brickworks etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding cost of formwork and reinforcement for reinforced cement concrete work (formwork and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Using admixture, plasticiser etc for air entraining,water reducing purposes including addition of agent for changing normal setting time of concrete as required. M25 grade concrete

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using Mixer Machine In super structure from plinth level up to 1st floor level. Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. Using admixture, plasticiser etc M25 grade concrete

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. In superstructure above plinth level up to 1st floor level. In proportion 1:3.(1 cement:3 sand)

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. On rough side (backing coat 15 mm and finishing coat 5mm thick) In cement mortar 1:3

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. On Fair side In cement mortar 1:3

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) Thickness = 1.5 mm thick

Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Applying water miscible dry powder based 1.5mm thick Vinyl wall putty of Seacem Paint (I) Pvt. Ltd. based on white cement and reinforced with vinyl resin specially designed self curing use as plaster over sand cement plastering over brick and cement concrete wall, ceilings and other surfaces for both interior and exterior surfaces to provide a firm and durable base for subsequent painting.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 1000mmx1000mm and above

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Providing fitting and fixing vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately). Parrryware make Pal Walvit Pan (inclusive of seat cover and fittings) (white/coloured) (Cat. No. C844K)

Providing fitting and fixing viterous china flat back type lipped front urinal basin with standard flush pipe & CP brass spreader and brass unions, etc. complete including painting of fittings& brackets, cutting and making good the walls & floor wherever required. Parryware make White New Magnum (Cat. No.C0575)

Providing fitting and fixing viterous china flat back type lipped front urinal basin with standard flush pipe & CP brass spreader and brass unions, etc. complete including painting of fittings& brackets, cutting and making good the walls & floor wherever required. Parryware make White Urinal (ii) Aquaseal (Cat. No.C0508)

Supplying fitting and fixing viterous china division plate including fitting and fixing complete as directed and specified. Parryware make White Partion Magnum / Large (Cat. No.C0571/07)

Providing viterous china wash basins with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings & brackets, cutting and making good the walls wherever required.(Pillar cock, stop cocks, waste coupling are to be paid separately.) PEDESTAL BASIN (with pedestal) Parryware make White Duke 660 x 495 (Cat. No.C8416/27) (white/coloured)

Supplying and fitting gun metal country pit valve (full way valve) I.S.I Make as specified and directed. 50mm dia

Supplying, fitting and fixing stop cock of approved brand of size as mentioned below and directed & specified (G.I. & C.P. pipes will be measured and paid separately) Brass stop cock (heavy) of Sant make 50mm dia

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Crabtree Frattini Pillar cock Cat. No. 21001

Supplying and fitting fixing Chrome plated C.P. flush cock of approved brand as directed and specified (G.I. and C.P. pipes will be measured and paid separately.) Jaguar Brand Flush cock with wall flange 25mm with lever knob

Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT. LTD.) brand 3 layered (outer green coloured, UV stabilised, middle black coloured and inner white coloured (with anti microbial property) fusion welded P.P.R. (Polypropylene Random Co-polymer) pipes of following size with all necessary fitting such as bend, tee, elbow, reducer, plug and clamp etc. 20mm OD (PN-16) SFMC brand 3 layer P.P.R pipe

Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT. LTD.) brand 3 layered (outer green coloured, UV stabilised, middle black coloured and inner white coloured (with anti microbial property) fusion welded P.P.R. (Polypropylene Random Co-polymer) pipes of following size with all necessary fitting such as bend, tee, elbow, reducer, plug and clamp etc. 50 mm OD (PN-10) SFMC brand 3 layer P.P.R. pipe

Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT. LTD.) brand 3 layered (outer green coloured, UV stabilised, middle black coloured and inner white coloured (with anti microbial property) fusion welded P.P.R. (Polypropylene Random Co-polymer) pipes of following size with all necessary fitting such as bend, tee, elbow, reducer, plug and clamp etc. 75 mm OD (PN-10) SFMC brand 3 layer P.P.R. pipe

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. 160mm dia.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators i) 6 mm clear glass

Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i)6mm clear glass

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing, fitting and fixing in position 62mm thick double skin partion with well seasoned Sal/ Bonsum/ Sundi / Hollock frame in size 75mm x 38mm and internal frame of 50mm x 38mm and fixing on both sides 8mm thick flat pressed melamine faced pre-laminated baggage board medium density fibre boards (MDF) bonded with phenol formaldehyde synthetic resin of approved shade as specified and directed at all levels. a) With Bajaj - exterior grade(one side decorative) (i) 8 mm tgick

Grading roof for water proofing treatment with (b) Cement mortar (i) 1:3 (1 cement: 3 coarse sand)

Providing and laying four course water proofing treatment with bitumen felt over roof consisting of first and third courses of blown or residual bitument applied hot @ 1.45kg per Sqm of area for each course second course of roofing with felt type 3 grade 1 (hessian base self finished bitumen) and fourth and final course with stone grit 6mm and down size, felt pea gravel spread @ 0.006m3 per Sqm including preparation of surface, excluding grouting etc. as directed and specified.

Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete Medium point up to 6.00 metre. Length.

Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete long point up to 10.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 3 x 1.5 sq. mm. cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system.(a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system.b) with 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch with LED , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 1-2 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 3 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 6-8 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 2 module

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 3 module

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 6 module

Supplying with fitting and fixing of RJ-11 Telephone jack MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (8+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way TPN (8+36) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A

Supplying ,installation, testing & commissioning of 5 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Supplying installation testing of UTP CAT6 Cable without PVC conduit

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Premium model 4-Star 1200 mm Sweep (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)

Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department 1 Ton capacity (Carrier make) Dura cool star

Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department 2 Ton capacity (Carrier make) estrella R410

15 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology 360V AC Input (300V – 470V A 3 Ph input- 1 Ph output With Isolation Transformer 12KW output with 0.8 output PF 30 min backup using SMF battery

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY 10.00 Sq.mm 2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

3 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology 230V AC Input (160V – 280V A 1 Ph input- 1 Ph output With Isolation Transformer 2.4KW output with 0.8 output PF 120 min backup using SMF battery

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

MILD STEEL STRUCTURE MS Canopy Structure in CRC MS fabricated Structure over gateway inclusive of Cutting, Bending Packing Loading/unloading for Entry and Exit Gate

Finishing and Painting two coat with Anti corrosive Epoxy primer and 1mm thick double coat Apcolite Advanced 2-Pack Epoxy Paint Glossy paint in white and red shade.

Hoisting and Installation /erection on site with Mechanical Lifting for Entry and Exit Gate

TENSILE FABRIC COVERING Providing and fixing of Cone shaped tensile fabric roofing in 720 GSM of Ferrari make. The shape will be as per Architectural design.Cutting stitching of fabric to shape, erecting to MS Structure and all required tensile cables, rivets, pins, bolts, perimeter, catenary, sectionalized aluminum clamps, fasteners ,gaskets.are inclusive of the item.

IRON GATES 1.,6 mt high CRC MS fabricated Structure Telescopic Mannually Sliding Bipanelled Gates inclusive of Cutting, Bending Packing Loading/unloading Hoisting and Installation for Entry and Exit Gate

Gate Rolling motor for 2500 kg wt.

High Gloss painting with anticorosive primer of 25 Micron dry film thickness for MS members of gate

Installation including fixing of roller guide rails, bolting and inserting of anchorplates, welding wherever necessary drilling into existing structure and making good. (No RCC work for support pillars or ground beams etc. are not inclusive of this item)

Packaging, loading,Shipping, unloading on site

Bricks Air 250 mm sweep crompton

Supplying with installation testing and commissioning of Philips Cirrus surface mounted SM365C LED33-6500 PSU-OD WH

Supplying with installation testing and commissioning of Philips DN311B LED6S-4000 PSU MB WH

Supplying with installation testing and commissioning of Philips City cube BWS400 LED05 H CW PSU GR S1

Supplying with installation testing and commissioning of Clamp AC308C BGP310 3xLED- HP/WW 220-240V 36 1N - Discontinued Optional Garden Spike

Supplying, Installation, Testing & Commissioning of hydraulic bollard with controller system ( Make - Secureye/ Smart Pawer of Equivalent) as per manufactures specification etc all complete as per direction of Engineer in charge item description as bellow Supplying of i.) Bollards (MODEL NO : S-HB100) 8 Set ii.) 2 sets of Controllers (MODEL NO : S-HB100) iii.) Installation & commissioning .(including all required civil works) -1 job

Supplying, Installation, Testing & Commissioning of Boom Barrier( upto 6 mtr armwith retractable feature , opening speed 3-6 second, Make- SmartTek, secureye or equivalent) with beam sensor, UHF Reader Door Contoler ANPR Camera integrated with boom barrier,NVR, 2 TB HDD, 22 inch LED monotor, cable and cabling, accessories etc all complete as per direction of Engineer in charge. item description as bellow i) Supplying of Boom barrier Secureye make or equivalent upto 6 mtrs long, inclusive of (MODEL NO : - S-BB100)- 2 nos ii.)Supplying of 4 nos Beam Sensor (2 PAIR) (MODEL NO : S-PB) - 2 nos iii.) Supplying of UHF Reader (MODEL NO : S-OU200C ) - 2 nos iv.) Supplying of Door controller (MODEL NO : S-IP1D2R )- 2 nos v.) Supplying of ANPR camera (MODEL NO : SIP-2HDG-W40V )- 2 nos vi.)Supplying of 4 Chanell NVR (MODEL NO : SIP-1S-2HDN-4 )- 2 nos vii.) Supplying of 2TB HDD (MODEL NO : ST2000VX007 )- 2 nos viii.) Supplying of 22" LED Screen (MODEL NO : SE-MON-22H )- 2 nos ix.) All cables and cabling accessories , installation and commissioning- 1 job

Supplying, Installation, Testing & Commissioning of Tripod Turnstiles , with bio matric access System ( Make : Smattek , Secureye or equivalent) inclusive of cableing etc. all complete as per direction of Engineer in Charge item description as bellow a)Supplying of a) Turnstiles of Secureye make or equivalent inclusive of cabling & other accs. (model no : S-VT1000- 4 Set b)Installation & commissioning of Trunstile - 4 Set

Supplying, Installation, Testing & Commissioning of X-ray baggage inspection system of Secureye make, Smarttek or equivalent inclusive of X ray Machine etc, item description as bellow a)Supplying of a) X-ray baggage scanner (MODEL NO : SECUVISION- 60400-1 set b)Installation & commissioning of X ray machine.- 1 job

Supplying , installation & commissioning of Under Vehicle Scaning System Technical parameters are : • Vertical resolution of the image : 5000*2048 pixels • Check the width viewing angle : < 4 meters • Speed of vehicle : < 30km/h with ALPR (Automatic Licence Plate Recognition) 70km/h without ALPR (Automatic Licence Plate Recognition) • Effective field of view (FOV): less than 170° • Auxiliary Light : 100W • Weight capacity : <20T • Waterproof grade : IP68 • Scanning device weight : 24KG • Scanning device volume : 450mm x 400mm x 88mm • Communication interface : RS232/RS422 • Operating Temperature : -10°C to 55°C • Storage Temperature : -40°C to +75°C System Host : • CPU : Intel} Core (TM) 2 Duo CPU • [email protected] or higher • Memory : 2G (optional 4G) • Graphics : Intel (R) Gen 5.0 Integrated Graphics Engine • Hard Disk : SATA 2 Hard Disk 500G • Dual LAN (At least one Intel Gigabit) • USB2.0 (Up to 4 pieces) • Monitor : 22inch LCD, resolution up to 1920*1080 • Operating voltage : 110-240V AC, 50-60HZ

Supplying, Installation, Testing & Commissioning of different type of camera like IP Speed dome Camera, % MP Bulet Camera , 8 Chanel NVR, 4 TB HDD, 8 Port POE switch, RJ 45 Connector Cat6 cable, GI pole for Cameras, Rack 4U 50" monitor , HDMI cable etc. all complete as per direction of Engineer in Charge, item description as bellow a)Supplying of Speed Dome Camera Model: SC-SIP2H-36XM-SA / SIP-HSD2HD-36XM-SDALM (MODEL NO : SIP-HSD-2HD-36XM-SDALM)-1 nos b)Supplying of 5Mp Bullet camera including calbes, GI poles where necessary, installing and commisssioning (MODEL NO : SCF-SIP-4HD-W4SIP)- 1 nos c)Supplying of Camera of Focal legth 6 mm angle 50° (15-20 mtrs) (MODEL NO : S-WIRV-2M)-8 nos d)Supplying of Camera of Focal legth 8 mm angle 30° (15-20 mtrs) (MODEL NO : S-W4SIP--F)- 8 nos e) Supplying of 8 port switch, (MODEL NO : S-8GE-2UE )-2 nos f) Supplying of 8 chanell NVR (MODEL NO : SIP-1S-2HDN-8)-2 nos g) Supplying of 4 TB HDD (MODEL NO : ST4000VX007)-2 nos h) Supplying of RJ connectors -50 nos i) Supplying of CAT6 UTP cables, ( MODEL NO : S-C6-305M)-700 mtr j) Supplying of 4U Rack- 3 set k) Supplying of 50" LED screen-2 nos l) Supplying of HDMI cable, 20 nos of poles & accessories-1 job m) installation, Testing, commissioning-1 job

SIMPLEX INFRASTRUCTURES LIMITED