8858/2022-23/E8

Amount

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls after filling any hole with putty complete all as spd.

All as per ser item No 1 here in before but applying one coat of white wash on ceiling.

All as per ser item No 1 here in before but applying one coat of colour wash on walls.

All as per ser item No 1 here in before but applying two coat of oil bound distemper on walls. Tints and shade shall be as approved by Engr-in-Charge.

All as per ser item No 1 here in before but applying two coats of cement base paint on walls. Tints and shade shall be as approved by Engr-in-Charge.

Preparation of old painted wood and wooden surfaces of any description not otherwise described over 10cm width or girth, when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old painted steel surfaces (such as CGI sheet, etc,) of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old treated wood and wood based surfaces including cleaning, stopping and rubbing down of any description over 10 cm width or girth and applying one coat of synthetic varnish complete all as specified.

Preparation of old painted steel surfaces (such as steel window etc.) of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified.

Complete removal of existing treatment surfaces of walls and applying Premium Acrylice Smooth exterior paint with Silicone additives of required shade: (two coats applied @ 1.43 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm).

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed and 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

m/S Varun Gupta

M/s. Rishav Sood

Pathania Builders

kaushal builders

KEWAL SONS

M/s Joginder Paul Bhatia

Havish Construction