Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹19.8 L+₹2,707 (0.14%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹21.5 L+₹1.7 L (8.85%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹22.6 L+₹2.9 L (14.5%)Rejected-Finance RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹23.0 L+₹3.2 L (16.4%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
24 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Subroto Park
GE (AF) Subroto Park c o 56 APO
ADDN/ ALTN TO OMQ SPE 01 (CSDO HOUSE) ALONGWITH CERTAIN WORKS SERVICES AT CAMERO COMPLEX SUBROTO PARK AND ADDN ALTN TO SQUASH COURT AND BADMINTON COURT AT CAMERO COMPLEX
2024_MES_649225_1
GE/SP/ TOKEN-81/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE (AF) Subroto Park
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) Subroto Park
₹68,000
Yes
14 Sept 2024
4 Apr 2024
26 Apr 2024
4 Apr 2024
24 Apr 2024
19 Apr 2024
Amount
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holes etc not exc 10 Sqm on plan and getting out in hard/dense soil complete.
Returning, filling in, soil, including, spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick all as specified.
Removing excavated material ie. Rock exc. 1.50 km but n exc. 5 km and depositing where directed . complete all as specified and directed.
M&L PCC 1:4:8 type D2 using 40 mm graded aggregate in Foundation filling and mass concrete / Bed concrete
S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips.
All as per item No above 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps. Complete all as specified and directed.
M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete.
M&L for RCC M-25 ( Design Mix) concrete (using 20mm graded aggregatet) as in shelves /slabs supported on walls, beam and columns,in floors ,roof, landings ,balconies, slabs in shelves and the like complete all as spd and directed.
M&L for form work to sides of concrete foundations ,footings bases of coloumns,raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to better.
M&L for form work to soffits os suspended slabs such as roof slabs,/shelves floor slabs etc ,landing ans similar work, not exe 200mm thick (horizontal or sloping ) for fair finish surface all as spd.
M&Lfor old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.
M&L brick work with old size sub class B brick straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar in CM 1:4 complete all as specified and directed.
M&L rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) redering is to be finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cementcomplete all as specified and directed by Engr In Charge.
Material & labour for preparation of new plastered surfaces and applying two coat of exterior grade modified antifungal water based weather proof acrylic emulsion dirt cleaning property paints on wall, fins, facias, chajjas over a coat of primer incl 3mm thick wall care putty etc complete all as specified and as directed by the Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including 3mm thick wall care putty specified and as directed by engr-in -charge.
Material & labour for preparation of old decorated plastered surfaces and applying two coat of exterior grade modified antifungal water based weather proof acrylic emulsion dirt cleaning property paints on wall, fins, facias, chajjas incl 3mm thick wall care putty etc upto and including 4th storyed high building complete all as specified and as directed by the Engr-in-Charge.
M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface all as specified and directed.
M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floors and pavings etc. all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.
M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7 thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed by Engr-in-Charge.
Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series), complete all as specified and direted by Engr-in-Charge. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per Note above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. (iii) Including 2 coats of synthetic enamel paint over a coat of red oxide complete.
Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified.
S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engr -in-Charge
S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F 100 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .
S&F aluminum alloy handles fabricated anodised of 100 mm long complete all as specified and directed. .
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F 15mm bore fency type CP bib taps cost copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.
S&F 15 mm bore CP stop/angle valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete.
S & F Papper holder with cover including all Accessories as directed by engr-in-charge.
S&F for 35 mm thick II nd Class hardwood Glazed and skeleton shutters, open rebated and with prepared to receive wire cloth (gauze), etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr In Charge.
S & F 35mm factory made plain framed, Flush shutters, solid core construction, with block board core and plywood face panels, commercial particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr In Charge.
S&F for size 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc. complete all as specified and directed by Engr In Charge.
S & F 25 mm dia anodised aluminium alloy with powder coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as specified and directed by Engr In Charge.
M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr In Charge.
M&L preparation of new plastered or unplastered surface and applying two coats of distemper oil emulsion on ceiling over a coat of alkali resistant primer specified and as directed by engr-in -charge.
S&F for 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
All as per item No.43 above but 20mm bore
S & F for 125mm dia Steelness steel grating doom with / without waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed by Engr In Charge.
S&F vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, CP fancy type pillar cock, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified.
Supply only integral water proofing compound as per manufactures instructions complete all as specified and directed by Engr In Charge.
M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Laying of 3mm thick prefabricated APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 170 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.
M&L applying two coats of water proofing aluminium paint over APP membrane complete all as directed by Engineer-in-Charge.
S & F Health Faucets Cardiff with SS Hose & Hook (Brass) including all Accessories as directed by engr-in-charge.make parryware No T9941A1..
M&L for glossy finished chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS -1237 (rubber moulded) in floor etc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) including 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified by Engr-in-Charge.
S& f 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wallls/floor.
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor
S&F PVC (SWR) bends any radius
S&F 75mm PVC (SWR) vent cowl
M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.
M&L for concrete bed type C2, 1:3:6 to drain pipes including packing under and haunching against the sides after they are laid and tested in all as specified and directed by Engineer-in-Charge
M & L for Precact cement concrete 1:2:4 type B1 (Using 20mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.
S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm
M &L for 50 mm magnetic catches and fixed complete all as specified and directed by Engr-in- Charge.
S&F 100mm Hasp and staple, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr In Charge.
S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.
S&F Rotational moulded polyethylene 500 Ltr water storage tanks as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge.
S &F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete all as specified and directed by Engr In Charge.
S&F gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 20mm fixed complete
S&F 10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr In Charge.
S&F for vitreous china urinal half stall type white complete all as specificed and directed by Engr-in-Charge.
S&F vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. Make : Hindware/Parryware
S&F viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc all as specified.
M&L for mild steel bolts exc 12mm dia but n exc 20mm dia (dia of neck) purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and directed.
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, ditto, with riveted, bolted or welded attachment conforming to grade Fe-410 -W(Gde E-250) quality complete all as specified and directed.
M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to grade Fe-410 -W(Gde E-250) complete all as specified and directed.
M&L for MS framed work of angle, tee, beam,channel, flat iron, conforming to Fe-410 -W(Gde E-250), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.
S & F moulded pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.
S & F moulded pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in eaves sheeting /cladding to wall, fixed with self tapping screws as specified.
M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate complete all as specified and directed by Engr In Charge.
Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per , Everest Ceiling grid system 'Regular T-2430' or its equivalent make of "'Ramco, Charminar/Armstrong'' at any height complete all as specified and as directed by Engr-In-Charge.
M&L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite
M&L PCC coping (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping including necessary form work, including weathering, slightly rounded or chamfered angles and throating as directed.
M&L for providing precast cement concrete 1:2:4 type B0 set in cement mortar 1:4 for louvres and jallies, 25mm thick (including all mouldings complete all as specified and directed.
M&L 100mm thick Plain cment concrete C2, 1:4:8 (using 40mm graded stone aggregate as sub base of floors or foundations complete all as specified.
M&L for sand filling under floor in foundations inclding watering and consolidation complete.
M & L for rubber moulded glossy finished Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid and bedded on sand cushioning complete all as specified and directed.
Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete
Dismantling of corrugated steel sheeting any gauge, thickeness including nainital or similar roof coverings complete all as specified and as directed.
Dismantling of wrought iron or mild steel work like framed trusses, door, gates and rolling shutters of any description not otherwise provided for
Dismantling of aluminium door, partition, window & ventilator including all necessary fittings complete all as specified and as directed
Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description exc. 1.50 Sqm not exc. 4.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided
Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring one light point controled by one switch with 1.5 Sq mm PVC insulated copper conductor cable drawing including conceled wiring in PVC conduit with 1.5 Sq mm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly with 3 mm thick plastic laminated sheet cover complete for one light point controlled by one switch complete all as specified and directed by Engineer -in-Charge.
All as per item No 2 above but one fan point controlled by one switch with cables 1.5 sq mm size.
All as per item No 2 above but one 5 pin 5 amps socket outlet on the independent board.
All as per item No 2 above but for one 3 pin 5 Amps socket outlet on the same board with other switches.
All as per item No 2 above but with 2.5 Sq mm PVC insulated standard copper conductor cable for one 3 pin 15 amps socket outlet. In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS 694 FR cable for continuous earth wire.
S&F Modular switch 1 way 5A , 1 modular suitable for 240 Volt AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular switch 6A-2/3 pin combined 2 modular, suitbale for 240 Volt AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular switch 1 way 16A 1 modular, suitbale for 240 Volt AC complete all as specified and directed by Engineer-in-Charge
S&F Modular switch 16A-2/3 pin combined 2 modular, suitbale for 240 Volt AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix White cover plate with frame 3 modular complete all as specified and directed by Engineer-in-Charge.
Supply and fix Modular metal flush box 3 modular complete all as specified and directed by Engineer-in-Charge.
Supply and fix White cover plate with frame 8 modular complete all as specified and directed by Engineer-in-Charge.
Supply and fix metal flush box 8 modular complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of ceiling roses , surface bakelite 65x51mm 3 terminals 3 phase PVC / Polycarbonate isolated body all as specified and directed by Engr-in-Charge.
Supply and fixing LED light fitting mirror type with high out diffuser 2 feet , 10 watt 220 V AC decorative with driver holder and LED lamp including connecting up with three core flexible copper conductor cable suitable size complete.
Supply and fixing wall mounted LED batten extrded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver 20 watt LED fitting with 100 lumen /watt 6000K , 230 Volts diffused optics etc complete with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing post top lantren LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
Supply and fixing post top lantren LED type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
Supply and laying GI pipe light grade galvanized with all fittings laid in trenches or fix on wall for cable protection of 80mm bore complete all as specified by Engineer-in-Charge.
M&L for in replacement submain wiring with two run of 4.0 smm single core PVC insulated but unseathed FRLS cable of specified size of multistandard copper conductor 1100 volts grade IS 694 marked and one run of 4.0 Sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metalic PVC conduit medium grade ISI marked (not less than 20 mm dia) complete with all acessories and fittings and laid /fixed concealed in wall /ceiling or surface in wall and surface conduit on ceiling and also include the specified runs of specified size earth continuty conductor of similar type cable complete all as specified -2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable.
Taking down old unsv MCB DB & MCB SP/SPN of any size.
Supply and fixng in replacement MCB distribution board with Bus bar 200A neutral link, earth bar made out of CRCA mild steel surface mounting SPN 2 way 230 volts double door type legal gray horizontal type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixng in replacement MCB distribution board with Bus bar 200A neutral link, earth bar made out of CRCA mild steel surface mounting SPN 4 way 230 volts double door type legal gray horizontal type complete all as specified and as directed by Engineer-in-Charge Make : shall be measured and paid separately
Supply and fixing in replacement MCBs 10 KA breaking capacity single pole, 240 volts 6 to 40 amps C Curve capacity.
Supply and fixing in replacement MCBs 10 KA breaking capacity single pole and neutral, 240 volts 40/63 amps C Curve capacity.
Supply and fixing ultra slim surface decorative 15 W with 100 lumen /watt 6000 K , 230 V, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed by the Engineer-in-Charge
Supply and fix in exhaust PVC exhaust fan , 250/300 mm sweep Ventil Air DX Off-White including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer -in-Charge.
Hanging only ceiling fan (M D supply ) and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engineer-in-Charge.
Taking down ceiling fan/exhaust fan and depositing to MES store for further action all as specified and directed by Engineer-in-Charge.
Supply and fixing ceiling fans complete with blades , down rods with suitable type of electronic regulator/remote and accessories 230V, 1200 mm sweep Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge.
M&L for taking down existing LT cable off size from various buildings and keep in safe custody for Sch of credit including making good the disterbed surface of road / path / hard standing etc using suitable materials complete all as specified and directed.
Supply , laying , jointing , testing LT cable 1100 V grade PVC insulated armoured and PVC sheathed with standard aluminium conductor heavy duty including cable glands, cable lugs etc to suit the cable size laid in trenches fixed along the poles bare of through GI pipe laid under floors road etc. fixed concealed in walls encased in G.I. pipe etc complete size of LT cable 10 Sq mm cross sectional area 2 core of make : Havells/ Kalinga etc all as specified and directed by Engr-in-Charge.
Excavation in treches in hard and dense sil n exc.1.5 mtr wide and n exc 1.5 mtr in depth for laying of pipe foundation for poles, stay laying cables etc and getting out complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading leveling watering and well ramming in layers n exc 25 cm in hard / dense soil complete all as specified and directed by Engineer-in-Charge.
Removing excavated material n exc 50 meters and depositing where directed at a level n. exc 1.5 meter above the starting point complete all as directed by Engineer-in-Charge.
M&L for Sand cushioining of cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete as directed by Engr-in-Charge.
Supply and laying well burnt sub class 'B' bricks old size as mechanical protection to under ground cables laying across the cable complete as directed by Engr-in-Charge.
M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3 mm burried vertically in ground earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate vertically in ground (earth pit not less than1.5 meter below ground level, connected to and including galvanized strip of size 25x4 mm dia (8 SWG) of any length as reqd at site by means of bolts nuts , check nuts and washers of galvanized steel , earth lead wire enased in and including 15 mm bore GI light grade pipe from earth plate upto pole upto 2.40 M hight from GL by means of and including 25x3 mm .M. S.F.I. Clamps bolts , nuts and washers etc and GI earh lead wire poles / feeders gang operated air break switches etc with provision of charcoal dust and common salt packed all around the earth plate , including necessary excavation and earth work in any type of soil /strata and testing complete all as specified and directed and shown on electrical para No. 5 of SSR pART 1 (1991) Note : GI wire more than 7.5 m will be measured separately.
S&F 4mm dia GI strip complete all as specified and difrected by engineer in charge
Taking down cement plaster on wall of any description incl racking out joints, hacking for key and scrubbing down with water complete all as specified and directed.
M&L for Preparing new surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
M&L for Preparation & Painting of old plastered surfaces of walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed
M&L for Preparation of old plaster surface of wall and applying 2mm thick of wall putty, complete all as specified and directed.
M&L for Prepararing old surfaces of walls and applying two coats of oil bound distemper, oil emulsion, over a coat of primer complete all as specified and as directed.
M&L for Prepration of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed.
M&L for 50 mm thick PCC 1:3:6, type C-2, using 40 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement, complete all as specified and directed.
M&L cement concrete type B1 1:2:4 (12.5 mm graded aggregate) as in benching/copings complete all as specified and directed
M&L for 50mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
S&F in repair Galvanished MS wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples complete all as specified and difrected by engineer in charge
S&F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes : framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 as complete all as specified and directed.
M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed
Demolition to stone slab and granite of any description or thickness in floors/wall etc and removing the debries outside the MOD land complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) tiles machine cut, in floors/ wall laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed
Taking out old serviceable toughened glass, fixed vertically, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc and refixing the same after laying of flooring including all new fixture and fittings like patch hinges, hydroulic floor door closer etc and all material required for erecting glass, making good breakages in taking out and handling complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails
M&L for Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
Supply and Installation of Maple/Teak wood sport flooring 21mm thick, 53 to 92 mm wide and required length including P.U. Polishing water based Polyurethane Lacquer in tongue and groove shape, edges of the boards jointed with finger lock groove and bottom side with air pass groove, laid over and jointed with screws to Pine wood runners of 70mmX45mm size, treated with anti-termide solution and fixed on bottom side with 19/10 mm thick EPDM air Cushioned pads 350mm in one direction all as per World Squash Federation.
Supply and Application of Washable Paint to wall surface in squash court as per manufactures instructions.
Supply and Installation of Squash Court Sound Board System of 2.1m X 0.43m and 22 mm gauge including fittings all as per WSF Specification.
Supply & Application of Game line marking of Red colour PU paint on wall surface and oil based paint on Wooden Flooring all as per WSF Specification.
Hindustan Co.Co
M/S MG GROUP
Ashish Sehgal and Co.
shakti construction
Mahesh Enterprises
J D ENTERPRISES
GIR RAJ BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .