REPAIR/MAINT OF ROAD, FURNITURE CAT EYE, POT HOLES UNDER AGE B/R-I AT FAIZABAD

Amount

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting 30mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint in different shed (Red/Yellow/Black) on new concret/plastered surfaces of any description over 10cm width or girth over a coat of priming paints plasered coat including preparation of surfaces complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

S&F in repair long delinator made of MS pipe 50mm outer dia, 900mm height from top surface of PCC, duly painted with stove enamelled black paint , covered with 4 nos of retro reflective high intensity HIP grade tape, in red, yellow white and green in colour of size 100 mm wide from top including necessary excavation and earth work in any type of soil and fixed in PCC block of size 300mm x 300mm x 300mm complete all as specified and directed. Make : SD-03 of M/s Sapphire Road Safety Products 3M or equivalent.

S&F in repair studs in dynamically designed and made up of ABS material reflectors fitted on both of dimension 100x100x20mm complete all as specified and directed.

S&F in repair speed bumps high resistance to severe impacts and hard weather conditions made of sturdy plastic (black/yellow colour) & UV Stabilizers, studded with reflectors on either side complete all as specified and directed. Make:- Dark eye Model No. DA 1001/ Sinor Infrastructure / 3M/Avery denson.

M&L for cleaning old dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make: Asian/ Nerolac/ Berger Paints. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.

M/S ATUL CONSTRUCTION

awashyakta enterprises

Matrubhoomi Construction