REPAIR RESURFACING OF ROAD IN 4 AREA UNDER AGE B R II OF GE AF ADM AREA AGRA

Amount

M&L for 75 mm thick (compacted thickness) moorum/ red bajri filling in road side berms spread, rolled and consolidated with using 8 to 12 tonne capacity power roller to required slope complete all as specified and directed.

M&L for repair to pot holes any depth n.exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc cutting around edges to at least 25 mm in depth and making good by applying tack coat with bituminous primer VG-10 grade @ 5 Kg per 10 sqm and laying premixed bituminous macadam, well rammed and sealed with paving bitumen VG-30 grade @ 9.8 Kg per 10 sqm blinded with 0.09 cum of stone chipping of size 6.3 mm and again well rolled with 8 to 12 tonne power roller (including supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30 mm complete all as specified and directed.

M&L for preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/ concrete surfaces than applying evenly a priming/ tack coat with paving bituminous primer VG-10 grade over the prepared surface by mechanical sprayer @ 5 Kg/ 10 sqm of surface area complete all as specified and directed.

M&L for applying bituminous premix asphaltic semi densse concrete 30 mm thick (consolidated thickness) with 5.5% binder content of paving bitumen VG-30 grade by weight of total mix including cement filler, on surfaces rolled, compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L for premix bituminous macadam laid, rolled and compacted with using 8 to 12 tonne capacity power roller to required gradient and camber n.exc 75 mm thickness (consolidated thickness) with 4% bitumen binder content of VG-30 grade by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished complete all as specified and directed.

M&L for preparation of existing bituminous surfaces by removing dust, dirt, grease and other foreign matters etc to receive the marking paint and M&L for retreo reflactive thermoplastic road marking paint line marking having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed. Note - MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ pattern of marking shall be as approved by the GE.

S&F in repair cat eye (raise pavement marker series 290) made of polycarbonate moulded body with electronically welded micro prismatic lense on both side ( colour : Yellow/ Red / Amber) for maximum retro reflection in wet and dry condition fixed with BT-69 complete all as per manufacturer instruction and as directed. Make :Series 290 of 3M or equivalent of Road Star/ Greenlite/ SINOR.

S&F in repair solar cat eyes/ road studs size (mm) 125 L x 125 B x 25 H including stem height 53 mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof coating visible distance upto 400 mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8 Hz including solar panel 3.5V/ 110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and approved by GE.

S&F in repair delineators made out of 75 mm dia, heavy duty mild steel pipe of length 1200 mm with two coats of synthetic enamel paint over a coat of red oxide primer with and including three strips of HIP retro reflective type-IX sheet of size 150 mm in height all around square pipe with different colour with and including necessary excavation and earth work in soft/ loose soil for fixing and embedding the delinator on ground with hold fast using PCC (1:2:4) type B1 (using 20 mm graded stone agregate) (minimum PCC block size 300 mm x 300 mm x 300 mm) for proper grouting complete all as specified and directed.

S&F in repair ABS plastic speed bumb/ speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 75 mm made out of steady plastic, highly resistance to severe traffic impacts and harsh weather condition,dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/ yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed.

C P Singh and Co

Attar Singh and Sons

garg construction company

HARI BUILDERS

D K Bhugra and Brothers