PERMANENT RE-APPROPRIATION OF OLD SCIENTIST HOTEL BLDG NO P176 FROM 24 DWELLING UNITS ACCOMMODATION IN TO 12 NOS OF TYPE IV SPECIAL MARRIED ACCOMMODATION INVOLVING ADDITION/ALTERATION AT RNDE ENGRS DIGHI PUNE

Dismantling tile work in floors, walls and roofs for thickness of tiles 10 mm to 25 mm laid in cement mortar including stacking material within 50 metres lead complete all as specified and directed.

Demolishing brick work built in cement mortor manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel, aluminium or wood) shutter of area 3 sqm and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead below complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel, aluminium or wood) of area 3 sq. metres and below including stacking within 50 metres lead of area complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing with all fittings complete all as specified and directed.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres leadcomplete all as specified and directed (Demolition of invert slope of chajja).

Dismantling stainless steel railing as in staircase complete all as specified and directed.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

Supply and Fix Dry System (Pull it Pully System 9 feet long ) total No of pipes 04 Nos Pulley operated clothes drying system consisting of anodized Aluminium pipes, each of outer dia 22mm and inner dia 19.8mm. Pullys made up of Delrin with rope guide mounted on channel pair of length 24".(distance between two pipes is adjustable) Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit. rope will be Polyster braide undyed of 3-4 mm dia complete all as specified and directed.

Brick work with common burnt clay machine moulded perforated bricks as in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks complete all as specified and directed.

Providing and laying Vitrified tiles in floor , size of Tile 600 x 600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% , of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Providing and laying Vitrified tiles in 600x 600mm size of tile (thickness to be specified by manufacturer), with water absorption less than 0.08 % of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.

Providing and laying Vitrified Matt Anti Skit tiles in floor in Size of Tile 600 x 600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% , of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Providing and laying Non Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed.

Providing and fixing Ist quality ceramic glazed wall tiles (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, Area of slab over 0.50 sqm, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed.

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

M&L for Half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure in CM 1.4 above plinth level upto floor level V complete all as specified and directed.

M&L for Reinforced cement concrete work in beams, suspnded floors, roofs having slope upto 15 degree landings, balconies,shelves, chajjas, lintels bands plain window cills staircases above plinth level upto level V , excluding the cost of shuttering centering, finishing and reinforcement wit h1:1:5:3 complete all as specified and directed.

M&L for centering and shuttering including strutting, propping etc and removal for suspended floors, roofs, landings, balconies and access platform complete all as specified and directed.

M&L for steel reinforcement for RCC works including strightning, cutting, bending, placing in position and binding above plinth level TMT bars Fe 500D or more complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles comforming to EN:12608. in any shape, colour and disign duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required ) of appropriate dimentions, EPDM gasket, hardware ,SS 304 grade fastner of min 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part I to 14, plastic packers, plastic caps and necesary stainless steel screws etc profiles of frame , sash & mullion (if required shell be mitred cut and fusion welded mechanically jointed duly sealed at all corners , including drilling of holes for fixing hardware and drainage of water etc . After fixing of gap between frame and adjacent finsished wall shall be filled with weather proof silicon sealent over backer rod of approved size and quality all complete all as sped and directed by engr in charge Fixed window/ventilator with mullion/transom.

Using R2 series with frame (33 mm & above) x (35mm & above) & mullion (33 mm & above ) x (50 mm & above ) (Height upto 0.90 metre).

Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) complete all as specified and directed.

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading complete all as specified and directed.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.

S&F mild steel 375mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.

Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener complete all as specified and directed.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed.

Providing and fixing wire gauge 35 mm thick shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood complete all as specified and directed.

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded orsealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete complete all as specified and directed.. Non decorative finish

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating ), transparent or dyed to required colour or shade, with nuts and screws etc. size : 300mm complete all as specified and directed.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating ) transparent or dyed to required colour or shade, with necessary screws etc. size 150mm complete all as specified and directed.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating ) transparent or dyed to required colour or shade, with necessary screws etc. size 200 mm complete all as specified and directed.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating) transparent or dyed to required colour or shade, with necessary screws etc. size 125 mm complete all as specified and directed.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating ) transparent or dyed to required colour and shade, with necessary screws etc. twin rubber stopper complete all as specified and directed.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete all as specified and directed.

Providing and fixing ISI marked M.S. pressed butt hinges medium weight bright finished with necessary screws etc. complete all as specified and directed.

S&F in repairs 25mm bore chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fancy knobs fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down existing UNSV gun metal gate valve of 20mm bore in repairs complete all as specified and directed.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm bore complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing with all fittings complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing with all fittings complete all as specified and directed.

Providing and fixing 20 mm bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete all as specified and directed.

Providing and fixing 15mm bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including cutting chases and making good the walls etc. complete all as specified and directed.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) 690 x 360 x 740 mm ONE PIECE EWC WITH SEAT COVER , S Trap/P Trap with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

Providing and fixing uplasticised PVC connection pipe, 15 mm nominal bore, with brass unions :45 cm length complete all as specified and directed.

S&F in repair 15mm bore two way CP brass, fancy type bib cock with inlet screwed for pipe and connections including necessary fittings complete all as specified and directed.

S&F in repair 15mm bore CP brass heathfaucet with inlet screwed for pipe and connections including necessary fittings complete all as specified and directed.

Providing and fixing in repairs toilet paper holder : C.P. brass complete all as specified and directed.

Providing and fixing C.P. brass Sink cock (wall mounted) with 200 mm (8") long swivel spout and wall flanges complete all as specified and directed.

Providing and fixing C.P. brass angle cock/ valve for basin mixer, flush tank and geyser points of approved quality conforming to IS:8931: 15mm nominal bore complete all as specified and directed.

S&F in repairs 100 mm bore CP floor trap, Stainless Steel Flat Square Lock Drain Jali-Floor Trap with Waste Pipe Hole or plain with grating including jointing with solvent cement including cutting chases and making good the walls etc complete all as specified and directed.

Providing and fixing in repair Brass Wall mixer (3-in-1) with arrangement including overhead shower with bend pipe for mixing hot & cold water screwed down for iron pipe and fixed of approved quality conforming to IS:8931: 15mm nominal bore complete all as specified and directed.

Providing and fixing in repairs C.P. brass shower rose with 15 mm inlet 150 mm diameter complete all as specified and directed.

Providing and fixing in repairs 600mm long stainless steel (304 grade) chrome plated wall mounted towel rack with hooks complete fixed with 40 mm long screws, rawl plugs etc., complete all as specified and directed.

Providing and fixing Stainless Steel (304 grade) Wall Mount Glass shelf Chrome Plated complete all as specified and directed.

Providing and fixing in repairs C.P. brass long body bib cock, 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 690 gms complete all as specified and directed.

Providing and fixing Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Providing and fixing in repairs 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing in repairs wash basin full pedestal fixed with fasterne, 15 mm C.P. brass swan neck pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400x210 mm of height 795mm. complete all as specified and directed.

S&F 622mm x422mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc Prayag or equivalent complete all as specified and directed.

Providing and fixing in repairs Stainless Steel kitchen sink without drainage board with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required overall size 495mmx420 mm bowl size 410x330x160mm complete all as specified and directed.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete all as specified and directed.

Demolishing cement concrete Nominal concrete of any description and posn manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor finishes complete all as specified and directed.

Making plinth protection 75mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) grouted with fine sand, including necessary formwork complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) complete all as specified and directed.

CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.

M&L for appying 3mm thick white colour wall care interior grade putty and making the surface even & smooth to receive the further treatment complete all as specified and directed.

Providing and applying white cement based putty exterior grade of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

Distempering with 1st quality acrylic distember (Ready made) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on new work (two or more coats). With cement primer complete all as specified and directed.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Providing and fixing cup board shutters 19 mm thick, with both side decorative and lamination factory pressed BWP grade marine ply as per IS 710 of approved brand , including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc and with auto closing spring loaded hinges (hydraulic type) etc complete all as specified and directed.

Providing and fixing cup board shutters 19 mm thick, with both side decorative and lamination factory pressed BWP grade marine ply as per IS 710 of approved brand , including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc as in partition, boxes,shelves,racks and cupboard, kitchen cabinet complete all as specified and directed.

Providing and fixing special quality bright finished brass cupboard or ward robe locks 50 mm with four levers of approved quality including necessary screws etc. complete all as specified and directed.

S&F 75mm Hasp and staple, safety type, brass with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete all as specified and directed. (Payment of providing and fixing auto closing hinges shall be paid separately)

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete all as specified and directed.

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws complete all as specified and directed.

Dismantling existing PVC (SWR) pipe with fittings from wall and ceiling of any dia complete all as specified and directed.

Providing and fixing 110mm bore on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded Bend 87.5°, 110mm bore for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded Single Y with door , 110x110x110mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

Providing and fixing 75mm bore on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded Bend 87.5°, 75mm bore for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded Single tee with door , 75x75x75mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and directed.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed.

Kota stone slab flooring over 18-20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and directed.

Kota stone slabs 18-20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed.

Demolishing cement concrete Nominal concrete of any description and posn manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor finishes complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor finishes complete all as specified and directed.

M&L for 10mm thick polymer modified cement plaster in CM 1:3 as in sunken floor tretment (wall and floor surfaces) and finishing the surface even and smooth complete all as specified and directed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and directed.

M&L for mechanical cleaning to surface to make it free from any bituminous residue/ dirt, oil and greese etc all as specified and directed by Engineer-in-charge. M&L for cracks treatment by cutting oprn and cleaning it from dirt/ loose materials etc and filling with polyurethene based sealent with and including application of PU based primer all as specified and directed by GE/ Engr-in-charge. Properties of PU based chemicals shall confirm to following Technical specifications: a) Highly Elastic. b) UV Resistance c) Adhesion to concrete. d) Tensile strength: not less than 2.0 N/Sqmm for free film. e) Elongation not less than 300%. f) Solid content by weight not less than 60%. g) Air/ water permiability BSEN 12390 at 5 bar- 72 hours should be NIL andminium dry film thickness of water proofing membrane must be 1.0mm. h) Accelerated waethering (ASTM 453) Pass 1000 hrs. i) Reaction to fire- non inflammable complete all as specified and directed.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed.

Providing and fixing in repairs square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, Area of slab upto 0.50 sqm, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size as in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed.

Providing and fixing 18 mm thick udaipur green marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete all as specified and directed.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete all as specified and directed.

Taking down carefully unserviceable sub main wiring including conduit from ground etc complete all as specified and directed.

Taking down unserviceable DBs/MCB SP/SPN/Isolator of any rating & size carefully disconnecting and making good disturbed surfaces complete all as specified and directed.

Taking down Copper/ aluminium point wiring (light/ fan/socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses pendent / brackets holders, regulators, unsv light fittings, etc removing material for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One call bell point controlled by one way switch

Wiring for twin control light point 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface medium class PVC conduit/or casing capping, 2 way modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable tc as required complete all as specified and directed

M&L for point wiring with 2 x 1.5 sqmm FRLS PVC insulated copper conductor single core cable + 1x1.5 sqmm FRLS PVC insulated copper conductor singlecore cable for earthing for one 3 pin switch socket outlet point 5 Amps complete all as specified and directed.

M&L for point wiring with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable + 1x2.5 sqmm FRLS PVC insulated copper conductor singlecore cable for earthing for one 3/6 pin switch socket outlet point 15 Amps complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover infront on surface or in recess including providing and fixing 3 pin 5/6 modular socket outlet and 5/6A modular switch connections etc as required complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover infront on surface or in recess including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet and 15/16A modular switch connections etc as required complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and direced

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S&F lamp holder PVC type with back plate suitable for lamp holder fitting complete all as specified and directed.

S&F call bell ding dong, 230 volts single phase complete all as specified and directed.

S&F LED light fitting 1 x 20W, 220 volts AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling role complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable or suitable size complete all as specified and directed.

S&Fix LED Decorative wall Light fitting gold finish with glass diffuser, 9 watt, 230 volts, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including one retrofit LED 9 watts warm/white bulb, testing etc complete including all as specified & directed.

S & Fix round surface mounting LED 12 W luminaire Integral round shape surface mounting high powder LED luminaire,dome shape opal diffuser complete fitting with all fixing arrangement complete all as specified and directed.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer complete all as specified and directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and directed.

S&F PVC body exhaust fan AC single phase 220 to 240 volts 900 RPM of size 250mm sweep with fixed on wall/ventilator and fixing arrangement complete all as specified and directed.

S&F steel body exhaust fan AC single phase 220 to 240 volts of size 300mm sweep with fixed on wall/ventilator and fixing arrangement complete all as specified and directed.

Cutting hole of required size in brick masonary wall for fixing of exhaust fan including providing and fixing 300mm dia PVC pipe and making good the same etc complete all as specified and directed.

Taking down the existing electric meter of any capacity and make after disconnecting electrically and carry out the cleaning and refixng, reconnecting including of electric meter, testing in all respect for smooth running complete all as specified and directed.

S & Fix water heater storage type, electric capacity 25 liters BEE 5 Star rated and bracket, nut,bolt,clamp, fasner etc, complete all accessories and fixing arrengenment complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Wiring for circuit, submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required complete all as specified and directed :-

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire

2 x 4 sqmm + 1 x 4 sqmm earth wire

2 x 6 sqmm + 1 x 6 sqmm earth wire

2 x 10 sqmm + 2 x 6 sqmm earth wire

Supply & fix MCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.complete all as specified and directed.

Supplying and fixing 4 way double door, horizontal type three pole and neutral, sheet MCB distribution board,415 V on recess, complete with tinned copper bus bar, neutral bus bae, earth bar din bar, interconnections, power painted including earthing etc.as requred (but without MCb/RCCB/Isolator) complete all as specified and directed.

Supplying and fixing following way, single pole and neutral double door, horizontal type three pole and neutral, sheet metal, MCB distribution board, 240 V on surface recess, complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnections, power painted including earthing etc.as requred complete all as specified and directed :-

12 way double door

6 way double door

Suppying and fixing 20 A,240 V SPN industrial type socket outlet with 2 pole and earth enclosed plug top along with 20 A "C" curve, SP,MCB in sheet sleet inclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. complete all as specified and directed.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. complete all as specified and directed.

Supply & fixing MCB, single pole, 240 volts, 6 to 40 Amps, complete all as specified and directed.

Supply & fixing MCB, Triple pole, 240 volts, 100 Amps complete all as specified and directed.

Supply & fixing MCB, Triple pole and neutral, 240 volts, 63 Amps complete all as specified and as directed.

Supply & fixing MCB, single pole,and neutral 240 volts, 6 to 40 Amps complete all as specified and as directed.

Supply and fixing of MCCB four pole, 415 volts, 125 Ampere, rupturing capacity 36 KA, complete all as specified and directed.

Taking up or down steel tubing & connections in trenches, wall/floor including cleaning for remmoval to store of sizeroviding and fixing GI pipe complete with all fittings, bends and accessories including all earth work and excavation, returning & refilling the following sizes and complete all as specified and directed. :-

50 mm bore

25 mm bore

15 mm bore

Supply and lay pipe galvanized, “Medium class”, including fittings of following complete all as specified and directed.

50 mm bore

25 mm bore

15 mm bore

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, tubular poles or laying of pipes, or for removal/laying of cables etc., not exceeding 10 sqm on plan and getting out in soft / loose soil including trimming sides of foundations and forming bottom surface to required level, complete all as specified and directed.

Returning, filling in, in soils, including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) for the following complete all as specified and directed. :-

25 mm bore

50 mm bore

Making connection of G.I. distribution 50mm to 80mm nominal bore branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threadind the pipe etc complete all as specified and directed.

M&L for constructing masonry chamber 30x30x50 cm inside,in brick work in cement mortar 1:4 (1cement:4 course sand) for stop cock, with C.I suface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 course sand:4 graded stone aggregate 20 mm nominal size),i/c necessary excavation,foundation concrete 1:5:10 (1cement :5fine sand:10 graded stone aggregate 40mm nominal size)and inside plastring with cement mortar 1:3 (1cement :3 course sand)12 mm thick,finished with a floating coat of neat cement complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size complete all as specified and directed. :-

70 sq mm 3.5 core

10 sq mm 2 core

Supply & fix LED 40W decorative post top lantern for 360 degree indirect light, made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection, resistance to impact and corrosion, glare free and better uniformity all as directed and specified.

M&L for 50mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and directed.

Supply & Laying 90 mm outside & 76 inner dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as specified in DSR , connected to pole/LT Panel all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 40 mm dia of light grade, for protection of earth strip complete all as specified and directed. Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate quoted.

Please Enable Macros to View BoQ information