REPAIR MAINT AT HANGARS AND CERTAIN MISC BR REPAIRS IN SHIKRA UNDER AGE BR II OF GE (NW) NOFRA COLABA MUMBAI

Amount

Note : The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (7th floor building) & necessary scaffolding & safety measurement. (a) Uniform for all deployed staff in duty supervisor as approved by GE. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Debris / site clearance immediately before leaving site. (e) Safety equipment to be carried all time. (f) Scaffolding wherever reqd deemed to be included in quoted rates. (g) Contractor is solely responsible for any defect or after working situation arises, take leaving fresh water tap open or throwing of debris through window or shaft, Penalty levied as mentioned above. (h) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (i) In case of 3 warning to contractor, it will be reflected in WLR for slow progress. (j) After painting cleaning of all floors, glass and Fixurniture by own arrengement.(k) Complaint registered upto 11:00AM & emergency complaint to be attended same day. (l) Complaint Team consist of 02 Carpenters,01plumber,01 Mason alongwith reqd helpers.

Taking down shutters of any description not exc 1 Sqm each and refixing in the same opening after easing & adjusting all as directed & specified.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing & adjusting all as specified

Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each , complete all as directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) , complete all as directed.

Taking down chowkats or frames exc 1.5 sqm each but n.exc 4 sqm with shutters (without taking off shutters from the frame) , complete all as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each, complete all as directed.

M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified supplied and fitted to chowkhats , complete all as specified.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section.

S&F for aluminium anodized barrel tower bolts 100 mm of extruded section.

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F butt hinges 100 mm stainless steel hinges medium weight and fixed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.(Note : Work carried out upto 7th floor of building quoted rate deemed to be inclusive of scaffolding and necessary safety precaution either from inside or from outside)

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed.(Note : Work carried out upto 7th floor of building quoted rate deemed to be inclusive of scaffolding and necessary safety precaution either from inside or from outside.)

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.(Note : Work carried out upto 7th floor of building quoted rate deemed to be inclusive of scaffolding and necessary safety precaution either from inside or from outside.)

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F as in repairs aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F as in repairs aluminium anodized barrel tower bolts 100 mm of extruded section and fixed.

S&F as in repairs 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F as in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F as in repairs 100 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F in repairs 40 mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished.

S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with / including fixing brackets, Knobs rollers etc.all as specified.

S&F in repairs door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed all as specified and directed.

M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified.

Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls/ ceiling, prerparation of surface by a thin layer putty and applying two coats of interior emulsion over a coat of primer over a layer of Wall care Putty as required thickness as per manufacture instruction with smooth roller finish, complete all as specified and directed. (Note: After painting ,cleaning of all floors,glass & furniture by own arrangement).

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling .

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 7th floor of bldg., complete all as specified.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 7th floor of bldg., complete all as specified.

M&L for preparation of old surface of wooden of any description including cleaning and applying one or more coat french polish till achiving desired finish all as specified and directed by Engeer- in charge.

M&L for preparation of old decorated surfaces of walls by scrapping old paint by steel wire brush, wash the surface throughly and applying one coat of acrylic emulsion exterior grade (100%) by using including necessary steel scaffolding all round the work side for any posititon/height, complete all as specified and directed.(Note : Work carried out upto 7th floor of building upto height of mummty top quoted rate deemed to be inclusive of scaffolding and necessary safety precaution.)

M&L for preparation of old decorated surfaces of walls by scrapping old paint by steel wire brush, wash the surface throughly and applying two coats of acrylic emulsion exterior grade (100%) including necessary steel scaffolding all round the work side for any posititon/height, complete all as specified and directed.(Note : Work carried out upto 7th floor of building upto height of mummty top quoted rate deemed to be inclusive of scaffolding and necessary safety precaution.)

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4 , complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table, floors and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

M&L for machine cut cudappa stone slab 20-25 mm thick laid over screed base in cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

M&L, for machine cut kota stone slab flooring 20-25mm thick in riser / treads of steps in single piece, skirting, dado and pillar laid over cement screed and jointed withover cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified.

S&F PVC wall panelling consisting of 5mm thick wood grain printed PVC sheet and fixed over GI running channels 50mm wide and 0.6mm thickness at every 1m interval , fixing over brickwall /concrete walls with screws and all corners, top and bottom portion of PVC lining covered with L/T shaped PVC sheet of same colour/texture including all necessary cuttings near switch boards and other fixtures if fitted over wall, complete all as specified.

Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed.

Taking down ceiling board/tiles from aluminium snap grid frame work and refixing the same in the same position after necessary tightening the sagging portion, replacement of the Main Tees, cross Tees, angles, suspending if required, including bolts, necessary washer,nut/clits/pin hook etc for securing frame work to ceiling to the snap grid complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, upto 7th floor of bldg.,complete all as specified.

M& L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified.

M&L plastering 10mm thick in CM 1:3 in ceiling finishing even and smooth without using extra cement, complete all as specified.

M& L for Rendering 15mm thick cement plaster in cement mortor 1:4 on brick or concrete surfaces and to be finished rough cast plaster, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and 1 to 2 mm thick wall care putty all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed(Note : Work carried out upto 7th floor of building upto height of mummty top quoted rate deemed to be inclusive of scaffolding and necessary safety precaution either from inside or from outside)

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling complete all as specified and directed.

S&F 2000 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top, black, double layered ) hoisted and fixed position all specified in SSR Part-I, with and including Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank above 7th floor terrace, complete all as specified and directed by Engineer-in-Charge.(Note- Quoted rate deemed to be inclusive of necessary safety precaution.)

S&F in repairs 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 7th floor of bldg., complete all as specified.

S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

S&F PVC (SWR) bends of 160 mm bore & ht. upto 7th floor of bldg., complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

S&F PVC (SWR) bends of 110 mm bore & ht. upto 7th floor of bldg., complete all as specified.

S&F in repairs vitreous china wash down water closet pan white including plastic sheet cover with nuts and bolts etc all as specified and directed.

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F in repair vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as specified and directed.

S&F in repair 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe complete all as specified and directed.

S&F in repairs 15mm size Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified and directed.

S&F in repairs fancy type Pillar taps 15mm size cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F in repairs CP angular stop cock 15 mm bore all as specified and directed.

S&F in repair health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed.

S&F as in repairs flush pipe of PVC 32 mm dia for low level cistern and connected to WC, complete all as specified.

S&F in repairs SS grating 100 mm dia , and white cement to sides , complete all as specified.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe all asw specified and directed.

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges , complete all as specified.

M&L for surface preparation : Surfaces to receive flooring system shall be abraded to a minimum of 150 microns. The surface should be grinded or power scarified as required to obtain clean, open porous concrete and to remove sufficient material to provide a sound surface, free of laitance, glaze, efflorescence, and any bond-inhibiting curing compounds. The surface shall be ensured that there are no grease, oil, and other penetrating contaminants. The damage and deteriorated concrete shall be repaired by polymeric screeds of approved make or Equivalent as approved by GE.

Primer : Primer will be applied which shall be a two component, solvent-free, epoxy-polyamido amine system having a volumetric ratio of mixing of 1:1 to yield thickness of 100 microns. Primer coat is a thin mild coating which penetrates into the concrete and forms and cohesive bond. Primer provides excellent adhesion of the concrete /cementitious substrates. Primer shall be allowed to cure for 6-7 hours.of approved make or Equivalent as approved by GE.

Repairing of Cracks/Pot Holes/Undulation : Surface areas where minor cracks and potholes are observed it should be covered or filled should be absolutely dry, clean and devoid of dust, oil loos floor particles, old paint, tar etc. These damaged areas to be filled or levelled with an instant concrete repair compound consisting of a specially developed EPU based Resin and Hardener which can be used for immediate repairs for worn out floors and pavements. This EPU based Resin, Hardener and grey coloured aggregates to mixed thoroughly with the aid of mechanical stirrer for 5 minutes. Lay the mix with a trowel and level it smoothly. Material to be used for repairing of cracks, potholes and worn out areas should be fast setting, no water curing, and higer compressive strength than concrete, thermally stable and water resistant. Make :Approved make or Equivalent as approved by GE.

EPU Top Coat : Top coat of Epoxy-Polyurethane (EPU) top coat shall be supplied in preweighed packs and ready to mix and use which will consists of resin, hardener, EPI (colour concentrate) and formulated aggregates to be mixed Resin & Hardener in the pre weighed ratio, add EPI colour (colour concentrate) and formulated aggregates to agitate the thickness of 1mm thick, then deareate by using spike rollers and to allow to cure for a minimum 48 hours before the trafficking is commenced. EPU based floor toppings offer excellent abrasion resistance, flexibility, chemical resistance and fast curing properties. lt’s a multi-polymer hybrid of epoxy and combined to impart the optimum properties. (FLOORTOP 1000) Make:of approved make or Equivalent as approved by GE.

Demarcation : Applying 150mm wide White/Red or Yellow (aisle) band marking with florescent consists of 2 components Polyurethane based resin and hardener. Make:Approved make or Equivalent as approved by GE.

Repairing of minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, and the like door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/mails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified.

Repairing of minor complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted , framed guard bar, barred iron doors; ladder; rafters, purlins ;frame work for water tanks, drain and similar work conforming to Fe 290 Gd E-165 all as specified .

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

SN CONSTRUCTION (BID ID -3137288)

Shivam Enterprises (BID ID -3141204)

Bright Construction Co (BID ID -3147465)

SHREE JAGDISH FURNITURE CO. (BID ID -3138185)