Drilling, boring and installation of 01 nos. tubewell with reverse rotary near house number 1588M sector 15part 2 in ward 19 under MCG.

Amount

Development of T/well according to clause 9.3 of IS: 2800-991 (Part-I) as amended upto date and specifications attached & as directed by the Engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required of this work. (a) When developed by compressor of the 450/600 CFM,250 PSI or suitable rating

Supplying & Packing graded gravel of size as Cum per ISI 4097/1988, as amended upto date and specification attached with this schedule of item of work. The Gravel should be free from Dust, dirt or vegetable matters. Packing to be done from the house pipe to the bottom of liner

Supply of D.I K-7 Pipe including laying, Jointing, cutting testing complete. 100 mm i/d

Supplying Erection Testing of Electric Control panel for T/Well in pump Chamber Consisting of Ms Sheet of Thickness 18 Gauge Duly painted Box Type floor, Mounted, Made by angel frame containing 1 Nos. Fully Automatic Air Brake starter Suitable For 15 HP Motor

Drilling of 685.80mm dia by hydraulic rotary Meterdrilling (reverse circulation method) accordingto ISI specification No.2800-1991 (Part-I) as amended upto date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and boulders

Providing and fixing in position suitable bail Each plug hook of 219.10mm as per IS 226/1975 as amended upto date, including the cost of M.S. screwed sockets etc. complete in all respects to the entire satisfaction of the Engineer-in charge of the work.

Sluice valves 80mm

Resistivity Survey

Supply & Lowering slotted pipe of size 219.10mm outer dia, ERW conforming to IS 3589-1991 (with last

Supplying, erection testing and commissioning of submersible pumping sets las per BIS Specification No.8034-1989 (as amended upto date for pumps) and IS. 9283 1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold water having Characteristics a specified in Clause-4 of IS. 8034/1989 : Clause 4.1 of IS 9283/1979. Each pump motor set shall be supplied with joint free 150 M.

Supply and lowering 219.10mm outer dia ERW steel plain pipes as per IS 4270-1992 as amended pipe in 4 to 7 metters random lenth with 88.90mm of threated ends (8 threads to an inch or 25.40 mm) manufactured out of 6.35 mm thick M.S socket 152.40 mm length with inside thread to match the pipe threads and made out of M.S plate in to borehole

Supplying and fixing 219.10 mm M.S. Clamp as per IS: 226/1975 as amended upto date for supporting the housing pipe supported on two girders not less than 100 mm X 150 mm and two meters long each embedded in suitable as

Supplying and fixing following C.I. D/F pipe, CIKG specials, sluice val with wheel, non return valves with G.M. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of

Supplying and fixing well threaded M.S. Cap for 273,10 mm outer dia M.S. pipe as per ISI 226/1975 as amended upto date to the

Supplying as per IS: 226/1975 as amended. Rate=500

Bidder Name

Amount

Sh. Aditya Parkash Gupta(GSTN-NA)

Poorav Enterprises(GSTN-NA)

Poorav Enterprises

Poorav Enterprises