REPAIRMAINT OF BOUNDARY WALLSECURITY WALL FENCING IN THE AREA OF INFANTRY SCHOOL UNDER GE MIS MHOW

Amount

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as directed and specified.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Excavation in trenches not exc 1.50 M wide and not exceeeding 1.50M in depth for foundation's soft well as its manhols, pier hales etc n exc 10 Sqm on plan and not exc 1.50m in depth and getting out soft/loose soil.

M & L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation. Filling & mass concrete etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) complete all as specified and directed.

Rendering 15 mm thick in cement mortar (1:4) , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with liqued water proofing compound "200ML Per bag paid and measered sepretly complete all as specified.

Supply only liquid water proofing compound .

Material and Labour for preparation of old decorated plastered surfaces of wall, pillasters,cornices etc by brooming down or steel wire brushing,scrapping down and washing with water. after completion of precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger Weather Coat All Guard, ICI Dulux (weather shield Max) and Nerolac (Excel Total). Make of primer :- Asian (X2) or Equivalent . Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 11 above but 6mm to 8mm dia complete all as specified and directed.

S&F in repair providing 20 mm thick pre-cast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid), including all mouldings and including pre-cast frame set in cement mortar 1:6 complete

Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed

Form work to sides of columns and similar work with fair finished surface complete all as directed.

Form work to sides and soffit of beam with fair finished surface complete all as directed.

RCC M-25 (Design mix) using 20mm graded stone aggregate as in column footing plinth beam tie beams and column up to plinth beam complete.

RCC M-25 (Design mix) using 20mm graded stone aggregate as in column as in column above top of plinth beam complete.

RCC M-25 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span.

Dismantling Wrought iron or mild steel work of any description not otherwise provided for

S&F MS work in hand rails, half rounded or other stock section or core for wooden hand rail straight portion, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to Fe 290 Gde E-165

S&F in repair of Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, stapples or steel pins, etc as directed (each line wire to be measured)

M&L for preparation of new steel surfaces and applying two coat of synthetic ename paint (ordinary tint) over a coat of primer complete all as specified & directed.

S&F of mild steelwork such as flat iron fillet for securing chain link fencing including all necessary drilling, bolting or riveting etc and similar work conforming to FE 410-O or Fe 310-O complete all as specified & directed..

S&F in repair of Galvanised mild steel chain link of 10 guage and 80mm x 80mm size of any type complete all as directed.

Supply only 12mm dia MS round bars as in strenghening bars for chain link fencing complete all as directed.

Chitragupta Construction

M/S Sunshine Construction

GEETANJALI CONSTRUCTIONS

MODI CORPORATION

M/S UnitedConstruction