CERTAIN REPAIR TO DRAIN, SOAKAGE WELL SEPTIC TANK ETC UNDER AOR OF AGE BR DETT- A OF GE 862 EWS

Amount

Cleaning/removing of blockage of EWCs, IWCs including P or S traps, gully traps of any size and depth upto and including 1st manhole manually with necessary T&P as per the site requirement and by any other mechanical equipments and later flushing with water at own arrangement in any position or location under AoR of AGE B/R Dett-A, complete all as specified and directed. (Note:- Cost of cleaning of 1st manhole shall be deemed to be inclusive in the unit rate of this item quoted by the tenderer)

Cleaning/removing of blockage of floor trap, nahni trap, wash basins, sinks etc. including waste pipe or waste coupling etc. by manually or mechanically and later flushing with water at own arrangement till complete satisfaction of Engr -in- Charge under AoR of AGE B/R Dett-A, complete all as specified and directed.

Cleaning/removing of blockage of sewer line (SGSW/RCC/CI) of dia 100/150/ 200mm etc.of any description or in any position by roding, by pressure pump of any type or by using any mechanical equipments, manually or by puncher of sewage line and repair the same if required including taking off and re-fixing manhole covers complete all as specified and directed by Engr -in- Charge

Cleaning/removing blockage of manholes of any size or depth in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing at own arrangement , including taking off and re-fixing manhole covers, complete all as specified & directed. (Note: For srl item 04 Complaint shall be adressed within 48 Hrs after receiving complaint through complaint slip or electronic media . If time limit exceeds penalty shall be levied @ Rs 100.00 Per complaint )

De-watering from septic tanks/soakage wells to any depth by honey sucker machine and also removing of all wastes, solid or liquid of any description to the location as specified and directed by Engr -in- Charge. Note : The rate includes for carrying and empting of sewage water out side defence land at Contractors own arrangement or as directed by Eng-in-charge w/o any extra cost to the Govt .

De-sluding by removing of solid/semi solid sludge from existing septic tanks/ soak wells of any depth and capacity in foul conditions including taking off and placing in position the cover slabs of any description including cement sand mortar 1:4 if required . Removal of sludge/solid contents will be remove to any place out side defence land or depositing where directed by Engr-in-Charge, complete all as specified and directed. (Note : The sludge shall have to be disposed off in trenches duly excavated and covered after sprinkling of chemicals and cover with excavated soil and removal of extra soil without any extra cost to govt)

Note (for Srl item No. 1 to 6) :- The scope of work is of day to day maintenance nature / requirement of works. Contractor shall attend the office of AGE B/R on daily basis even if quantum of work is low and receive / collect the complaints /requirements of works and shall rectify the repair/maintenance works within time given below. (Contractor shall submit Complaint slip dockets in triplicate and complaint register in format issued from office to be used for receiving complaints from MES Complaint Cell in format given by Eng-in-Charge for entire period) (a) Sewage-24 Hrs (For srl item no 01 to 06) (b) Major Sewage complaint- 15 days If Contractor fails to rectify the complaints with materials / items to be replaced a penalty of RS 20.00 for (srl item 01 to 03) and Rs 500.00 (srl 05 & 06) per day shall be levied to contractor after specific duration (elaborated above) of that particular item shall be recovered from his payment.

Systematically cleaning and de-silting/de-sludging of blocked sewage pipe line 110/75mm dia and any depth including taking out sludge/silt and other foreign materials from sewage line by rodding with using steel rod or split bamboo sticks thoroughly from both sides between adjacent manholes still clear flow of sewage line is observed, passing knots, kamb and disc of required size or pumping out liquid waste /sewage, plugging and diverting the flow to the drain if necessary and stacking the removed silt/sludge in deposits outside defence land as directed including taking precautionary measures such as safety belts, dry cell torch for lighting inside the manholes and drain etc, sprinkling bleaching powder on the silt/sludge to removed to avoid bad smell and disposal of silt complete all as specified and as directed. (Note:- Rate of excavation of earth pits and bleaching powder if required for disposal of silt will be included in the quoted rate).

Demolition of cement concrete (un-reinforced) as in ground floors and paving not exceeding 15cm thickness (below or above) the ground level) by breaking up and disposal of rubbish and debris to a distance not exceeding 100m, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specially provided for (Reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specially provided for (Reinforced cut as required to facilitate demolition, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling/ breaking up old drain pipes (salt glazed ware, AC/PVC/ RCC pipe) set in cement mortar, complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation, shaft, wells, cesspit, manhole, pier holes etc and n. exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed.

Description all as per Srl item No. 15 here in before but depth exceeding 1.5m depth, complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm (soil) ,complete all as specified and directed.

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete in manhole, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:4) complete all as specified and directed. Note: Brickwork has to be carried out for raising manholes, new manholes in other locations i.e in unhygenic areas as per site requirement.

Description all as per Srl item No. 20 here in before but except brick.

M&L for brick work with sub class 'B' bricks, old size, straight or curved in one brick thick honeycombing walling, built in cement mortar (1:4) as in soakage well including demolition of old soakage well, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. Note: The stone walling work has to be carried out for repair of septic tank, manholes, drains, etc.

Description all as per srl item no. 23 here-in-before but except stone. Note: Stone retrieved from demolition will be re-used.

Extra over stone walling for hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge held against the dressed surface on sand stone n.exc 20mm, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar (1:4), mixed with and including water proofing compound as per manufracturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note: Cost of WPC will be include in the quoted rate by contractor.

M&L for Rendering 20 mm thick on fair faces of stone wall surface in cement mortar (1:4), mixed with and including water proofing compound as per manufracturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note: Cost of WPC will be include in the quoted rate by contractor.

M&L for raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement Mortar 1:4, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregates) as in surface channel and drains including necessary formwork, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, (using 20mm graded aggregate) as in coping, benching, quoilin block, string coursec, kneelers, apex stone, bed plates, water troughs, bed block and the like including weathering, slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajjas, shelves and the like complete all as specified and directed.

M & L for use and waste of form work to soffits of flat suspended slabs such as roof slabs, floor slabs,chajjas, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M&L for providing precast reinforced cement concrete landing cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items (vibromechanically floated) with plain faces in cement concrete 1:2:4, type B-1, using 20mm grading stone aggregate and setting in cement morter 1:4 including necessary formwork, complete all as specified and directed. Note:- Curing arrangement shall have to be made by contractor at his own cost without any claim to deptt.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Cutting into existing manholes of 150mm (internal dia) for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 (using 20mm grades stone aggregate) smooth finished, and reforming benching as required, complete all as specified and directed.

M&L for 150 mm internal dia Salt-Glazed stone ware drain pipes grade 'A' laid in trenches over concrete bedding jointed in cement mortar (1:1) and tested, complete all as specified and directed.

M&L for 200 mm internal dia Salt-Glazed stone ware drain pipes grade 'A' laid in trenches over concrete bedding jointed in cement mortar (1:1) and tested, complete all as specified and directed.

M&L in repair for salt glazed stone ware gully traps, square or round mouthed, type P of size 150x150mm set and jointed to drain pipes with cement mortar 1:1 and making good to disturbed surface, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore SGSW pipe complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm bore SGSW pipe complete all as specified and directed.

M&L in repair for mild steel frame work for fixing manhole covers of angle or other section including hold fast conforming to FE-410-O, complete all as specified and directed.

S & F in repair of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165, complete all as specified and directed.

M & L in repair for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed with cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates), complete all as specified and directed.

S & F in repairs cast iron bends of 75mm dia including oval access door, complete all as specified and directed.

S & F in repairs cast iron bends of 100mm dia including oval access door, complete all as specified and directed.

S&F in repair for PVC (SWR) 110mm bore pipes, single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

S&F in repair for PVC (SWR) 75mm bore pipes, single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

S&F in repair for PVC (SWR) 75mm bore pipes, single socketed, in any length with rubber ring joints fixed to wall with suitable size of clamps, complete all as specified and directed.

S&F in repair for PVC (SWR) 110mm bore pipes, single socketed, in any length with rubber ring joints fixed to wall with suitable size of clamps, complete all as specified and directed.

S&F 110mm bore for PVC (SWR) bends any radius with oval access door, complete all as specified and directed.

S&F 75mm bore for PVC (SWR) bends any radius with oval access door, complete all as specified and directed.

S&F in repair of 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement including fixing in cement concrete 1:2:4, type B-1, complete all as specifed and directed.

S&F 110mm bore for PVC (SWR) reducer any radius jointing with jointing material, complete all as specified and directed.

S&F 110mm bore for PVC (SWR) junction single 'T' equal or unequal jointing with jointing material, complete all as specified and directed.

S&F 75mm bore for PVC (SWR) reducer any radius jointing with jointing material, complete all as specified and directed.

S&F 75mm bore for PVC (SWR) bends any radius, complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4), type B-2 using 40mm graded stone aggregates as in floor, laid in alternate pannels, finished the surface even & smooth without using extra cement, complete all as specified and directed. Note :- No extra cost shall be claimed by the contractor for expenditure incurred in respect of form work.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub base for laying floor finishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed. Note : All disturbed items surfaces of doors and plumbing services shall be made good by the contractor without any extra cost.

M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed. Note : All disturbed items surfaces of doors and plumbing services shall be made good by the contractor without any extra cost

S&F in repair for vitreous China squatting pan Orisa pattern 580x440mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding and including connections to 'flushing cistern/ pipe, complete as in repair all as specified and directed. Note : All disturbed items surfaces of doors and plumbing services shall be made good by the contractor without any extra cost

S&F in repair for plastic water closet seat cover, coloured, closet pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. Note : All disturbed items surfaces of doors and plumbing services shall be made good by the contractor without any extra cost

S&F in repair for vitreous China wash down water closet (Pedestal pattern) white, including fixing bolts, flushing cistern and flushing pipe and also including plastic water closet seat cover black colour, closet pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. Note : All disturbed items surfaces of doors and plumbing services shall be made good by the contractor without any extra cost

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets, complete all as specified and directed.

M&L for loose filling of brick bats of gauge 80 to 150mm in soakage pits or well, complete all as specified and directed.

Dismantling old abondoned existing manholes of any depth with debris and making good to earth, complete all as specified and directed.

S&F cast iron/ oval excess door with and incl nut and bolts, washers for bend T or Y at any location for 75mm bore, complete all as specified and directed.

S&F cast iron/ oval excess door with and incl nut and bolts, washers for bend T or Y at any location for 100mm bore, complete all as specified and directed.

M&L for using PVC pipe of 110 mm bore upto length of 450mm in order to cover gap between floor trap and finished floor at old location and jointing the same with epoxy solvent/ cement/chemical (LW+/URP solution) duly mixed with cement/white cement in order to repair leaking seepage toilet/ bath/ WHB/ Urinals etc as directed by Engr-in-Charge at site, complete all as specified and directed. Note : The work shall be executed in foul canditions and no extra cost to be borne by Govt exchequer.

NATIONAL TRADING COMPANY (BID ID -3192216)

M/S Darshan Kumar (BID ID -3185978)