CONSTRUCTION OF BALANCE WORK OF K.G.B.V, KIJAYE PADDER DISTRICT KISHTWAR WINTER ZONE (GROUND FLOOR, 1ST FLOOR AND 2ND FLOOR) (3rd call)

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead in Cement motor

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1Osqm on plan, depth upto 1.5mtr. Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed. all kinds of soil

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcem 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size (including all lead, lift and carriages)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) incluing Extra for brick work in Foundfation and Plinth . (including all lead, lift and carriages)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel Primer all works. (including all lead, lift and carriages)

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2 (including all lead, lift and carriages)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo/ Fir wood

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all lead, lift and carriages)

Half brick masonry with bricks of class designation 75 in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) including Extra for half Brick masonry in superstructure above plinth level upto floor V level. (including all lead, lift and carriages)

Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1Omm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) (including all lead, lift and carriages)

Centering and Shuttering including strulling, popping and removal of form work

Centering and Shuttering including strulling, popping and removal of form workSuspended floors, roofs, landings, balconies and access platform

Centering and Shuttering including strulling, popping and removal of form work edges of slabs and breaks in floors and walls.Under 20cms wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.coir veneer board (conforming to IS 14842) ( 4 mm thick)

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float for glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings I wooden frames with rawl plugs screws etc. (including all lead, lift and carriages)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood 50x12mm

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railirg and similar work including applying a priming coat of approved steel primer. G. I. pipes 40mm nominal bore (class B). (including all lead, lift and carriages)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, columns etc. excluding cost of centering and shuttering, all work upto floor V level (including all lead, lift and carriages)

Cement concrete flooring 1:2:4 ( 1cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. Crushed. (including all lead, lift and carriages)

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 course sand) including pointing the joints with white cement and matching pigment etc., complete. (including all lead, lift and carriages)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed withpigment of matching shade complete (including all lead, lift and carriages)

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels . Granite of any colour and shape (Area of slab upto 0.5 sqm) 18mm thick (including all lead, lift and carriages)

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 32 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Finishing walls with water proofing cement paint of required shadeNew work (two or more coats) applied @3.84 kg/1 Osqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed (including all lead, lift and carriages)

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100 x 10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200 x 10 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 125 mm

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100mm

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 470x420mm bowl depth 178mm

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:external work-Exposed on wall 15 mm nominal dia

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:external work-Exposed on wall 20 mm nominal dia

Providing and fixing PVC soil waste / rain water disposal 100 mm nominal dia

Providing and fixing PVC soil waste / rain water disposal 75 mm nominal dia

Providing and Fixing PVC bends 75 mm dia

Providing and Fixing PVC bends 100 mm dia

Providing and Fixing PVC pipes for sink or wash basin including PVC waste littings complete 40 mm dia

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 (15 mm nominal bore)

Providing and fixing brass bib cock of approved quality (15 mm nominal bore )

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931( 15 mm nominal bore )

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing glass strips in joints of terrazo I cement concrete floor. 11.18.1 40 mm wide and 4 mm thick

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

FARIDIA CONSTRUCTION

M/S Shees Group Of Construction