PROVISION OF 02 NOS TOILET BLOCKS WITH ALLIED FITTINGS FOR TRAINEES AT AF STATION DEOLALI

Amount

Surface dressing n exc 15cm deep and getting out in any type of soil, complete all as specified

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, in any type of soil for foundations etc and getting out complete all as specified and directed.

All as per SI item No. 02 here-in-before but in soft/ loose soil.

All as per SI item No. 02 here-in-before but in hard soil.

Material & labour for PCC 1:4:8 type D-2 using 40 mm graded broken stone aggregate as in foundation filling and mass concrete all as specified and directed.

Material & labour for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.

Material & labour for brickwork with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 all as specified and directed.

Material & labour for reinforced cement concrete of M-25 ((Design Mix) using 20 mm graded stone aggregate in foundations including footings, plinth beams; bases for columns, etc.; basement slabs all as specified and as directed.

All as per item No-8 here-in- before but in columns, pillars , posts and struts etc. all as specified and as directed.

All as per item No-8 here-in- before but in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.

All as per item No-8 here-in- before but in as in Chajja complete all as specified and directed

All as per item No-8 here-in- before but in as in slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Material and labour for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter including flat rough finished surafaces of concrete complete all as specified and directed.

All as per item No-13 here-in- before but to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.

All as per item No-13 here-in- before but to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified and directed.

All as per item No-13 here-in- before but to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete ( flat ) complete all as specified and directed.

All as per item No-13 here-in- before but to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping)

All as per item No-13 here-in- before but to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide rough finished surfaces of concrete.

Returning, filling in and ramming with approved excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Supply and fix mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with mild steel annealed wire not less than 0.9mm dia or securing clips, complete all as specified and directed.

All as per item no. 19 hereinbefore but of 5 to 10 mm dia bars as in stirrups, spacers and binders complete all as specified and directed.

Material & labour for providing plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges including formworke if required all as specified.

Spreading & leveling in layers n.exc. 25cm thick, well ramming including watering as required all as specified.

Material & Labour for hard core of broken stone or boulders of gauge n. exc 63mm and deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C-1 20mm graded aggregates as in plinth protection laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

Material & labour for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded broken stone aggregate as in sub base of floor all as specified and directed.

Material & labour for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded broken stone aggregate as in flooring all as specified and directed.

Material and labour for coloured joint free non skid ceramic tiles 7-8 mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but not exc. 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match with and over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) finished even and rough to receive the top layer all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 450 x 350 x 7 mm on vertical surfaces such as skirting, dado etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10mm thick screed bed in CM 1:4 all as specified and directed.

Material & labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

All as per item No. 31 here-in- before but 15 mm thick in cement mortar 1:4 all as specified and as directed.

All as per item No. 31 here-in- before but 5mm thick in cement plaster 1:3 on ceiling all as specified and as directed.

Material and labour for preparation of new surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer and applying two coat of cement base paint including curing complete all as specified & directed.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Supply and fix steel ventilators with top hung shutters including hinges, steel peg stay, etc. complete all as specified and as directed.

Supply & fix pressed steel frame made out of MS sheet of 105 x 60 mm of thickness 1.25 mm for doors with one or more 30mm rebates including necessary supply and fixing lugs, locks, strike plate including fixing of hinges etc also including flat iron hold fast, threshold plate and filled with PCC 1:3:6 inside MS frame complete all as specified and as directed.

Supply and fix 35mm thick second class hard wood panelled shutters (two panels) Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint over wood or wood based surfaces exceeding 10 cm width or girth including preparation of new surfaces all as specified and directed.

Supply & fix factory made solid panel PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

Supply & fix mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fix Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fix 150 mm extruded aluminium alloy handles anodised complete all as specified and as directed

Supply & fix GI water tubes 15mm bore medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

All as per item No-49 here-in- before but 20 mm bore.

Material & labour for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix in 20 mm bore gun metal, globe or gate valve with iron wheel head , screwed both ends for iron pipe cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and as directed.

Supply and fix in 20 mm bore angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix bib tap of 15 mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed.

Supply and fix vitreous china wash hand basin (Oval shape), white, flat back of size 550 x400mm excluding taps, chain and plug and porcelain stopper but including CI brackets and CP waste fittings and PVC waste pipe of 32mm dia complete all as specified and directed. Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor without any extra cost.

Supply & fix 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply & fix liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 105 gms)

Supply & fix tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply and fix vitreous china squatting pan Orissa pattern size 580 x 440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to disturbed surfaces of floor to match with existing specification etc complete all as specified and as directed.

Supply & fi x health faucet(ABS body) including 0.8mm dia 1.2 mtr long flexible tube and wall hook and MS anodised hanging device complete all as specified and as directed.

Supply & fix 10 Ltrs capacity PVC valveless , low level flushing cistern of syphonic action type, white with inlet ball valve, float, handle including flush pipe of polythylene of low or high density or PVC 32 mm dia for low level cistern and brackets complete all as specified and as directed.

Supply and fix vitreous china wash down water closet pan (Pedastal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including necessary fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and fix PVC connections "15 mm size of length 450 mm" with PTMT nuts all as specified and all as directed.

Material & labour for concrete bed to drain pipes 150 mm bore in PCC 1:3:6 type C2 using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Material and labour for reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, bore of pipe 150 mm complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moullds, mitred/ stopped ends all as specified and directed.

Material & labour for precast cement concrete in PCC 1:2:4 type B-1 as in manhole cover slabs set in CM 1:4 including necessary moulds etc. complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) two layered, hoisted and fixed in position complete all as specified in SSR Part-I and as directed. Note:Contractor may provide 3 layered tanks without any extra cost at their option

Supply and fix 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

Supply and fix 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed

Supply and fix 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

All as per item no. 71 hereinbefore but fixed to walls with clamps and cement joints all as specified.

Supply and fix 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) all as specified.

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door all as specified.

Supply and fix cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with CP grating with ot without hole for waste pipe complete all as specified.

Supply & fix cast iron vent cowl 75 mm dia complete as directed.

Material & labour for 150x100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' complete as directed.

Supply and fix Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete as directed.

Material and labour for 20 mm thick cement plaster in CM (1:4) on concrete surfaces mixed with WPC @2% by weight of cement finished the surface fair and even complete all as specified and directed. Note:- WPC shall be measured and paid separately

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing /new surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying one coat bitumen grade 85/25 @ 1.20 Kg/Sqm (f) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only approved integral water proofing compound.

Material & labour for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded broken stone aggregate as in sub base of floor all as specified and directed.

Material & labour for machine pressed rubber moulded precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-40 Grade with grey cement and no pigment all as specified and as directed.

Material and labour for machine cut Cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material & labour for granite (of any type and any colour) work of 18 mm to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms etc., including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying granite top complete all as specified and as directed.

Supply and fix Vitreous china Urinal, half stall type, white (excluding flushing cistern) including CP coupling, waste pipe and all necessary fittings complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as directed. Make: Jaguar Model No.URS-WHT-13261 or equivalent in specified makes.

INTERNAL ELECTRIFICATION

Material and labour for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sqmm 1100 Volts, FR grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and aaccessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sqmm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for one light/fan point controlled by one switch.

All as per SI item No. 88 here-in-before but for one 3 pin socket out let 5 Amps on same board.

All as per item No. 88 here-in-before but for one 3 pin socket out let 5 Amps on independent board.

All as per item No. 88 here-in-before but with two runs of 2.5 Sqmm cable and one run of 1.5 Sqmm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply and fix switch piano, flush button, single pole, one way, 5 Amps, 230V complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way, 15 Amps, 230V complete all as specified and as directed.

Supply and fix socket outlet, 2-in-1, 5 pin, 5 Amps, flush type complete all as specified and as directed.

Supply and fix socket outlet, 2-in-1, 5 pin, 5 to 15 Amps, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/ PVC /polycarbonate isolated body, 65x50 mm two to three terminals all as specified.

Supply and fix and connecting up LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete all as specified. Make: Crompton fitting DMLN1LT8-16, 1X18/ 20W and LED rode LT8-20-865-2 or equivalent in Philips/ Bajaj/ Havells/ Wipro as approved by GE

Supply and fix exhaust fan AC single phase 230 Volt of size 300mm sweep with lauvers, complete all as specified and directed.

Supply and fix sheet metal enclosure 8 way MCB SPN distribution board 240/415 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43, IK 09 protection all as specified and directed.

Supply and fix MCB SP 6-32 Amp single phase 240 volts including making connection complete all as specified.

All as per item No. 100 here-in-before but MCB SPN 6-32 Amp

Material and labour for providing earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) surrounded with alternate layer of charcoal and salt as directed with top edge of the plate not less than 1.5 mtres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion including earthing pit in PCC 1:3:6 type C-0 & 40mm thick precast RCC cover in 1:2:4 type B1 reinforced with 8mm dia TMT bar @ 75mm c/c both ways with 02 Nos lifting handles of 12mm dia MS plain bar, GI pipe 20mm dia medium grade with funnels & wire mesh for watering and 15mm dia light grade GI pipe for earth lead protection etc including necessary excavation and earth work in any type of soil complete all as specified and as directed. Note:-(i) GI lead wire and protection pipe upto 7.5mtr is deemed to be included in the quoted rate. (ii) Earthing required for External electrification shall also be measured under this item.

Supply and fix LT XLPE insulated & PVC heavy duty armoured cable 1100 volts grade UG stranded aluminium conductor electric cable cross sectional area 6 Sqmm 2 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Material & labour and fixing of DWC pipes it should be flexible in diameter as well as in joints under external load and soil natural movement, socket & spigot joint with elastometric sealing ring, it should be highly corrosive resistant and it should be impact resistant, chemical resistant, flexible, light weight and it should have hih flow capacity of internal 38 mm dia as per IS-14930 complete with coupler, elbows, joints and necessary joints required for completion of works all as specified and directed. Make : Duraline / Gemini/ Rex

M/s Nilesh Enterprises