8114/2022-23/E8 PERIODICAL SERVICES TO BULIDINGS, JOINERY, PLUMBING AND SANITARY, FITTINGS, INCL CONNECTED WORK UNDER AGE B/R II AND REPAIR TO EXTERNAL WATER SUPPLY NETWORK AT KIARI CHUMATHANG and NYOMA UNDER GE 860 EWS

Amount

M&L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on works with one or more coats.

M&L for preparing of old surfaces of wall by brooming down or steel wire brushing, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil & greasy spots and applying one coat of cement base paint on walls including cornices, pilasters etc complete all as specified and directed by Engrs-in-charge.

M&L for preparation of old decorated surface of walls and applying one coats of white wash complete all as specified and directed.

All as per item No. 3 here-in-before as above but in ceiling surface.

M&L for preparation of old painted surfaces of steel and iron work of anydescription not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified.

M&L for old decorated surface of walls and applying one coat of oil emulsion distemper complete all as specified.

All as per item No. 6 here-in-before but on ceiling surface

Taking down chowkhat or frame exc 1.5 Sqm each but n.exc 4 Sqm each with shutter (without taking of shutter from the frame) complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sqm (without taking of shutter from the frame) each with complete all as specified and directed.

Taking down shutter of any description n.exc 1.00 Sqm each complete all as specified.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified.

S & F 2nd class Hard Wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded complete all as specified and directed.

S & F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F MS Butt hinges, medium weight cold rolled 100 mm size complete all as specified and directed..

All as per item No 15 above but 75 mm size.

S & F MS Pressed handles cast type anodized of size 125 mm complete all as specified and directed..

All as per srl item No 17 above but 100 mm size.

S & F MS barrel tower bolts , stove enamelled black with bright bolt and fixed of size 125 mm long complete all as specified

All as per srl item No 19 above but 100 mm long.

S & F Mild steel sliding door bolts,haps and staple and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast or alluminium alloy and fixed 250mm long complete all as specified

M & L in repairs for Aluminium extruded section Door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified

S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified

S & F in 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified.

Dismantling of wall and ceiling boards(Fibre, pulp, insulation, etc) or insulation board/slabs/blankets. any thickness, including cover fillets complete. (Note : Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessoeies and making necessary electric conection, complete all as specified and directed by Engr-in-Charge.

M & L for 4 mm thick plywood with 3 Nos of Ply, grade BWR, type BB, fixed with nails in ceiling complete all as specified

M & L for 4 mm thick plywood with 3 Nos of Ply, grade BWR, type BB, fixed with nails in wall complete all as specified

M & L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame in wall portion complete all as specified

S & F for anodised aluminium snap grid frame work for false ceiling(grid size 605 X 605 mm) fixd to walls with rawl plugs and screws and hang to roof members with 6 mm dia. G.I. wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

Providing and fixing gypsum board ( size 600 X 600 mm)12 mm thick in ceiling fixed with screw as per manufacturer instructions complete all as specified.

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in unframed work complete all as specified

M & L for 2nd class hard wood timber plain fillets. square, rectangular in section, area exc 13 Sqcm and not exc 25 Sqcm secured with nails complete all as specified

M & L for 2nd class hard wood timber plain fillets. square, rectangular in section, area exc 3 Sqcm and not exc 6 Sqcm secured with nails complete all as specified

M & L for second class soft wood n.exc 6 sqcm moulding as in cornices, picture rail complete all as specified

S & F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified

S & F in 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified.

S & F in 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified.

Taking down of 15mm dia steel tubing and connections, including cleaning for refixing complete all as specified

S&F 16 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified

Taking down of 20 mm dia steel tubing and connections, including cleaning for refixing complete all as specified

S&F 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position of capacity exceeding 250 ltrs and not exceeding 500 ltrs , all as specified.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories, all as specified .

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position of capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified.

S & F for rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including all accessories, all as specified .

S & F in repairs for Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore all as specified.

S & F in repair for Bib taps,short body, fancy type, cast copper alloy, brass chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair Fancy type, Pillar taps, cast copper alloy, with capstan heads , chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm all as specified.

S&F in repair toilet paper holder white, vitreous china, box type all as specified.

S&F in repair soap dish, vitreous china white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws all as specified.

S & F in repair Tubular Towel rail 600mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white and trap, including connection to drain (or outgoing pipe) and to flushing pipe all as specified.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover for pedestal pan all as specified.

S&F in repair Vitreous China Urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe all as specified.

S&F in repairs Vitreous china wash hand basin with pedestal, coloured, flat back of size 550 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, all as specified.

S&F in repair for PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F in repair gun metal globe or gate valve with iron wheel 20 mm dia all as specified.

S&F in repair for Vitreous china squatting pan of pattern Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring all as specified.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar or cement lime mortar all as specified.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 ( using 20mm graded crushed stone aggregate) with solid blocks,exc 10 cm in width and setting in cement mortar 1:6 all as specified.

Rendering 15 mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement all as specified.

Preparation of new plastered surfaces of wall and applying three coats of white wash. all as specified.

M&L for Plain cement concrete 1:3:6 type C- 1 (using 20 mm graded crushed stone aggregate) as in as in haunching benching and PCC coping including necessary form work complete all as specifed and as directed.

M&L for rendering 10 mm thick cement plaster in cement mortar (1:3) on fair faces of brick work or concrete surfaces complete all as specifed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed

M&L For Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed

All as per item No 69 above but in riser of steps, skirting, dado etc.

M&L for non-skid ceramic coloured tiles (400 x 400mm) x 7 to 8 mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specifed

M&L for glazed ceramic colour tiles 450x350 mm and 7mm thick in dados, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specifed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) for laying floor finishes complete all as specifed

S & F in repair CP Health Faucet CP with 1.5 m flexible pipe for toilet complete all as specifed

S & F in repair jet spray CP with 1.5 m flexible pipe for toilet complete all as specifed

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specifed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of pipe line and getting out in hard/dense soil complete all as specified and directed.

Returning filling (soils) incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil complete all as specified

Removing excavated material (Soils) not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point. complete all as specified

Taking up/down old DI/GI/PP-R tubing connection PP-R pipe 20 mm dia including clearing from trenches complete as directed by Engr-in-charge

All as per ser Item No 80 here-in-before but PP-R pipe 25 mm dia

All as per ser Item No 80 here-in-before but PP-R pipe 32 mm dia

All as per ser Item No 80 here-in-before but GI/PP-R pipe 50 mm dia

All as per ser Item No 80 here-in-before but GI/PP-R pipe 63 mm dia

Supply & Laying of 3-layer PP-R (Polypropylene Random Co-polymer) pipes SDR 7.4 & SDR 11 UV stabilised antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting bore of dia pipes in 20 mm fixed complete all as specified and as directed by Engineer-in-Charge.

All as per ser Item No 85 here-in-before but PP-R pipe 25 mm dia

All as per ser Item No 85 here-in-before but PP-R pipe 32 mm dia

All as per ser Item No 85 here-in-before but PP-R pipe 50 mm dia

All as per ser Item No 85 here-in-before but PP-R pipe 63 mm dia

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in same position of tank capacity execeeding 250 ltrs and not exceeding 500 litres , all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in same position of tank capacity execeeding 500 ltrs but not exceeding 1000 litres , all as specified and directed by Engr-in-Charge.

S&F, Rotational moulded polyethylene water storage tank (cylinderical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, all as specified.

S&F, Rotational moulded polyethylene water storage tank (cylinderical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 750 litres including all accessories, all as specified.

S&F, Rotational moulded polyethylene water storage tank (cylinderical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, all as specified.

Construction of Lorry filling point of size 0.6m x 0.6m x 5m using precast cement concrete solid block masonary type C-1, 1:3:6 (20mm graded crushed stone aggregate), exceeding 10cm in width and setting in cement mortal 1:4 over 150mm thick PCC 1:3:6 (nomival mix) type C-2 (using 40 mm graded crushed stone aggregates) complete, 10mm thick rendering in cement mortar 1:4 on concrete surface finished even & smooth without using extra cement The masnory work including PCC sub base shall be 0.80 m below GL including neccessary earth work complete all as specified and directed by Enginner-in-Charge.

Construction of stone masonary valve pit chamber of size 90cm x 90cm x 160 cm (internal dimension) including all necessary excavation and earth work in hard/dense soil and disposal of surplus soil to a distance not exceeding 50 meters as directed including PCC in foundation of the mixture (1:4:8) type D-2 stone masonary in cement mortor 1:4 rendering 15 mm thick in cement mortar 1:4 internally finished even and fair and pointing flush externaly as the work proceeds in the same mortar as of stone masonary including MS frame (made out of angle in 40x40x6mm) and MS steel cover 3.15 mm thick with handle and locking arrangement with hinges angle iron flat as required at site

Dismantling of unserviceable valve pit of any size complete all as directed by the Engr-in-Charge.

Taking up/down old gate valve/Ball valves of size 20/25/32/50/63 mm bore complete as directed by Engr-in-charge.

Supply and Fixing PP-R Ball valve (brass inserted) for 20 mm dia pipe as per requirement of the site complete all as specified and directed by Engr-in-Charge

All as per Item Ser No 99 here-in-before but for 25 mm dia PP-R pipe

Supply and Fixing PP-R gate valve (brass inserted) for 32 mm dia pipe as per requirement of the site complete all as specified and directed by Engr-in-Charge.

All as per Item No 101 here-in-before but for 50 mm dia PP-R pipe

All as per item No 101 but for 63 mm dia PP-R pipe

Making connection of PP-R distribution branch with PP-R main of 20 mm to 40 mm sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed by Engr-in-Charge.

All as per item No 104 but for 50 to 75 mm dia PP-R pipe

Supply and fixing in replacement rotational moulded polyyethylene water storage tank heavy duty PUF insulated 5 layers storage tank ideally suitable for extreme temperature +35 degree centigrade to -45 degreee centigrade conditions and the outer FRP (Fibre giass reinforced plastic) layers withstand vagaries of nature and prevent erosion / damages of the tank of capacity 500 Ltrs complete all as specified.

Collecting and testing of water sample, bottle from Pump houses from govt authorised laboratory for testing of various parameters as per IS 10500 complete all as specified and directed by Engr-in-Charge, Note :- Test result will be submitted to AGE E/M office.

M/S Web Company

M/s Aman Enterprises

M/S stanzin tundup

M/S TAMCHOS GURMATH

M/S MOHD ALI

M/S SUN RISE BUILDERS