Construction of 3 nos 9 meter pole tower at Collectorate office roof at Shajapur in Ujjain BA

Amount

Labour charges for hoisting, fixing and erection of 9.00 metre high poles (three pipes of 3.00 meter hight in each column) with all its necessary components i.e. climbing ladder, and fixing with bolts, nuts and spring washers, and all safety measures i/c necessary weilding etc. wherever required all complete in all respect as per direction of the Engineer - in - charge. (The payment of steel structural works, nut, bolts and washers etc. will be paid separately) (The poles are to be supplied by the department from the store of the BA.)

Painting with LUXOL high gloss synthetic enamel paint or equivalent in two or more coats till satisfactory colour is achieved over and including base coats of etching primer (BISON wash primer or equivalent) and BISON HB Zinc phosphate primer or equivalent to required shade and colour.(The colour of painting shall be of international orange and white patches in alternate). The painting should be done in accordance with IS standard including all operations, T & P required for the job and safety measures required for the said job etc. all complete as per the direction of Engineer-in-charge.

Transportation charges by mechanical transport of 100 mm dia MS pipes (9 Nos 3.00 meter each) from Shajapur BSNL store to the site i/c loading, unloading and lifting charges from GL upto third level) etc. all complete as per direction of E in C.

Providing welding machine at site for welding of the tower components including members, bracings etc. all required for erection of 3 nos. 9.00 meter high poles including loading, unloading, transportation and carrying it over on the roof for execution of the work and then taking it back etc. all complete.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Providing and fixing bolts including nuts and washers complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Abdul Parvez Khan (BID ID -797162)

MAHAJAN CONSTRUCTIONS (BID ID -797237)

MUNNA KHAN (BID ID -795146)