Smart periodical services and repair work of OTM Accn under AGE B/R-II, GE Gurdaspur.

Amount

Taking down cement plaster of any description on brick walls or concrete surfaces etc including racking out joints hacking for key, scrubbing down with water etc from walls and ceiling surfaces of any description complete all as specified and directed.

M&L for rendering 12mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 5mm thick on ceiling in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) type B0 using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars and finished with cement sand mortar (1:3) using in patches (area n.exc 5 Sqm each) and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces complete all as specified. Note: - Cost of formwork and welded mesh, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.

Preparation of newly plastered surfaces on wall/ roof projections including facia, cornices, chajja etc and applying water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, one or more coats and grinding the puttied surface with mechanical grinder to make the surface even and smooth for receiving primer and applying two coats of Oil bound Distemper of approved colour incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. Note:- Allow 6-8 hrs to dry the surface in susequent coats of primer and distemper and including necessary scaffolding at any height complete all as specified and directed.

M&L preparation of new plaster surface and applying three coats of white wash on wall complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new plaster surface preparation of scrapped surfaces of of wall/ceiling and applying external primer over the plastered wall/ceiling surfaces and applying two coats of cement base paint of approved colour incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directe and applying two coats of cement base paint of wall over one coat of alkali resisting primer on wall complete all as specified and directed by Engineer-in-Charge. (Note: Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed).

M&L for preparation of new plaster surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices, chajja etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of of wall/ceiling and applying water proof wall care putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of Oil bound Distemper of approved colour incl primer to be applied with fully automatic airless spry machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. (Note:-Allow 6-8 hrs to dry the surface in susequent coats of primer and distemper and including necessary scaffolding at any height complete all as specified and directed).

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices, chajja etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm, with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of of wall/ceiling and applying external primer over the plastered wall/ceiling surfaces and applying two coats of cement base paint of approved colour incl primer to be applied with fully automatic airless spry machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. (Note:-Allow 6-8 hrs to dry the surface in susequent coats of primer and distemper and including necessary scaffolding at any height complete all as specified and directed).

M&L for preparation of old plastered surfaces of ceiling by brooming down, making good holes, cracks, etc and applying one coat of white wash incl cleaning the floor/ joinery surfaces, glass panes all as directed by Eng-in-charge

M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying one coat of white wash ht upto 12m incl cleaning the floor/ joinery surfaces, glass panes all as directed by Eng-in-charge

M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint ht upto 12m complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm including beads all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm each incl hacking out old glass complete all as specified

Cutting down plants/shrubs of girth n,exc 15cm from roof tops/sides of external walls of bldg, chajjas, wall junction etc incl taking out penetrated roots in to the wall, slab surfaces and applying "STUFALO" solution (herbal medicine) as per manufacturer's instructions in and around the surfaces and making good the location with PCC 1:2:4 and CM 1:2 including necessary scaffolding upto 12m height from GL all as directed at site.

M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm with internal dust extraction system for clean environment and preparation of old plastered/scrapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm to 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the putty surfaces with mechanical grinder for make the surface even and smooth for receiving primer and Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directed by Eng-in-charge. (Note: Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make).

M&L for preparation of newly plastered surfaces on wall/ roof projections including facia, cornices, chajja etc and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, one or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior waterproof primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note:-Paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.

Supply only integral water proofing compound.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity (cyclinderical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceble water tank all as spdecified & directed.

S&F in repair 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed.

S&F PVC (SWR ) bends 110 mm bore any radius.

S&F stack clamps (for 100 mm dia pipe) made out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor all as specified & directed.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 13,490/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

BISHAN DASS (BID ID -3366557)

M/S P P BUILDERS (BID ID -3366706)

JOGRAJ CONSTRUCTION COMPANY (BID ID -3374741)

pee kay construction (BID ID -3374637)