Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
13 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 2.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2) 10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIA
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any work of EI / PI / RRI / ABS/ IBH/ LC Gate interlocking work which include indoorand outdoor signalling work.
8 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
IMPORTANT NOTES WITH NIT: 1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N-HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE-I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer-incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract. 8.It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality. 9.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 10.As per railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e-MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
S&T work in connection with provision of Goods Shed at Ghatpindrai station of Jabalpur division of West Central Railway (Signalling Work).
JBP-N-SIG-TENDER-2026-5~WCR
JBP-N-SIG-TENDER-2026-5
Open
Works - General
11 Months
Jabalpur, Madhya Pradesh
₹0
₹2.1 L
13 Feb 2026
19 Jan 2026
30 Jan 2026
302 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 49,86,177.45 | ||
| — | 50.00 | — | — | ||
| Supply of QNA1 (AC immunised relay), 8F-8B, 24VDC along with plug board (Base plate), retaining clips and connectors conforming to BRS:931A, IRS:S34 & IRS:S23. INSPECTION BY RDSO. | — | — | — | 2,32,389.5 | |
| — | 2.00 | — | — | ||
| Supply of flexible cable single core multistrend copper conductors, 1x2.5 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 44,545.86 | |
| — | 30.00 | — | — | ||
| Supply of Earth Electrode assembly as per Drg.No. S&T/CON/KOTA/Earthing/01 INSPECTION BY CONSIGNEE. | — | — | — | 37,155.3 | |
| — | 10.00 | — | — | ||
| Supply of Phenolic Laminated sheet, resin bonded 10mm thick, grade P3 in standard size of 1.22 x 1.22 Mtr as per spec. No IS 2036 of 1974. INSPECTION BY CONSIGNEE. | — | — | — | 40,928.8 | |
| — | 50.00 | — | — | ||
| Supply of lamp holders , switches, two pin (Bakelite type) and bulbs(230V/110V) for location boxes (Anchor make or ISI mark) INSPECTION BY CONSIGNEE. | — | — | — | 4,209.5 | |
| — | 4000.00 | — | — | ||
| Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/SPN/189/2004 ver 3.0 with latest amendment. INSPECTION BY CONSIGNEE. | — | — | — | 3,34,800 | |
| — | 400.00 | — | — | ||
| Supply of end plate suitable for disconnect terminal. INSPECTION BY CONSIGNEE. | — | — | — | 5,000 | |
| — | 100.00 | — | — | ||
| Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. INSPECTION BY CONSIGNEE. | — | — | — | 14,831 | |
| — | 400.00 | — | — | ||
| Supply CONSIGNEE. | — | — | — | 4,376 | |
| — | 100.00 | — | — | ||
| Supply of cartridge fuse block made of PBT as per RDSO Drg. Nos. SA - 23748 Alt. 4 and Spec. Nos. IRS-S-75/2006 with latest amendment. Fuse block shall be suitable for round head type fuses. INSPECTION BY RDSO. | — | — | — | 18,660 | |
| — | 100.00 | — | — | ||
| Supply o f non detoriating type low voltage cartridge fuse r current 2Amp/4Amp in equal proportion round head type as per spec No IRS/S/78/92 with latest amendment. INSPECTION BY RDSO. | — | — | — | 8,078 | |
| — | 120.00 | — | — | ||
| Supply of GI pipe as per Specn. No. IS 1239 (Part-1)/1990 medium class normal bore of 100 mm, nominal mass of Tube 12.5 Kg (+/-) 10% per meter and complying parameters of specification. INSPECTION BY CONSIGNEE. | — | — | — | 1,44,442.8 | |
| — | 5.00 | — | — | ||
| Supply of Main Signal Post 140 mm outer dia 4.5 Mtr Length as per spec Nos IRS S 6/81 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 37,524.2 | |
| — | 2.00 | — | — | ||
| Supply of Main Signal Post 140 mm outer dia 3.6 Mtr Length as per spec Nos IRS S 6/81 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 13,311.66 | |
| — | 5.00 | — | — | ||
| Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia. Medium class 49 IS Specification IS:1239 Pt-1/1990). INSPECTION BY CONSIGNEE. | — | — | — | 11,091.2 | |
| — | 7.00 | — | — | ||
| Supply of Cast Iron Main signal surface base 140mm as per spec Nos IRS S 10 and Drg Nos 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal 5.5 50 Mtrs long as per RDSO Drg. Nos. SA- 23156. & signal front staging complete assembly. INSPECTION BY CONSIGNEE. | — | — | — | 68,197.15 | |
| — | 20.00 | — | — | ||
| Supply of Signal Nos. plates. as per Drg enclosed. INSPECTION BY CONSIGNEE. | — | — | — | 9,617 | |
| — | 5.00 | — | — | ||
| Supply of A/AG/C/P/G board as per RDSO Drg. Nos. SA 23455-56 RST- 52 11445 & SA 23476-77 as applicable INSPECTION BY CONSIGNEE. | — | — | — | 2,628.5 | |
| — | 25.00 | — | — | ||
| Supply of Hand Cuff Locks / Godrej Navtal lock with common key. INSPECTION BY CONSIGNEE. | — | — | — | 6,571.5 | |
| — | 4.00 | — | — | ||
| Non Metallic (FRP) colour light signal housing multi unit type for railway signalling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Ver. 1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest INSPECTION BY CONSIGNEE. | — | — | — | 1,07,932.24 | |
| — | 2.00 | — | — | ||
| Non Metallic (FRP) colour light signal housing multi unit type for railway signalling suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M (Adv.) and as per SPEC. No. RDSO/SPN/194/2006 Rev.2.0 or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. INSPECTION BY CONSIGNEE. | — | — | — | 56,535.92 | |
| — | 4.00 | — | — | ||
| Supply of Offset bracket 5 1/2" suitable for 140mm outer dia of main signal. INSPECTION BY CONSIGNEE. | — | — | — | 3,891.16 | |
| — | 4.00 | — | — | ||
| Supply of Offset Bracket 3-1/2" for shunt signal. INSPECTION BY CONSIGNEE. | — | — | — | 1,957.24 | |
| — | 5.00 | — | — | ||
| Supply of position light shunt signal Unit. as per RDSO Nos. SA23840. INSPECTION BY CONSIGNEE. | — | — | — | 38,721.15 | |
| — | 3.00 | — | — | ||
| Supply of 2 Way Junction Type Route Indicators as per RDSO Nos. SA23401-6 as per IRS:S-66/84 amndt-1 or latest INSPECTION BY CONSIGNEE. | — | — | — | 1,00,746.36 | |
| — | 2.00 | — | — | ||
| Supply of Calling-on Unit suitable for LED signal as per RDSO Drg no24351(Adv.) Alt1 complete along with its base & clamping arrangement. INSPECTION BY CONSIGNEE. | — | — | — | 5,568.9 | |
| — | 0.50 | — | — | ||
| Supply of flexible cable single core multistrend copper conductors, 1x6 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 41,652.07 | |
| — | 12.00 | — | — | ||
| Supply of Track Relay QTA2 (AC immunised relay), 9 Ohm, 2F/1B, along with plug board (Base plate), retaining clips and connectors conforming to BRS:939A, IRS:S34 & IRS:S23. INSPECTION BY RDSO. | — | — | — | 73,881.24 | |
| — | 12.00 | — | — | ||
| Supply of Track Relay QBAT (AC immunised relay), 9 Ohm, 2F/2B along with plug board (Base plate), retaining clips and connectors conforming to BRS:939A, BRS:938, BRS:966, IRS:S34 & IRS:S23. As required at site. INSPECTION BY RDSO. | — | — | — | 68,271.36 | |
| — | 12.00 | — | — | ||
| Supply of QSPA1, 24VDC, Slow to pick up 8F/4B, along with plug board (Base plate) retaining clip and connectors confirming to BRS: 933A, IRS:S60 & IRS: S34. INSPECTION BY RDSO. | — | — | — | 68,865.6 | |
| — | 20.00 | — | — | ||
| Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes. Consignee inspection under manufacturer certificate. INSPECTION BY CONSIGNEE. | — | — | — | 4,680.4 | |
| — | 12.00 | — | — | ||
| Supply of Track feed battery chargers of 10A rating to Specn. Nos. IRS/S/89/2013 Ver 1.0 or latest amendment. Charger shall be suitable for charging 80 AH battery. INSPECTION BY RDSO. | — | — | — | 34,068.84 | |
| — | 48.00 | — | — | ||
| Supply of track lead junction boxes as per Drg. Nos. RST11509 made from fiber glass along with terminal blocks. The TLJB should be BLACK in colour. INSPECTION BY CONSIGNEE. | — | — | — | 62,086.56 | |
| — | 12.00 | — | — | ||
| Supply of B type choke to specn.Nos.IRS.S.65/83 with latest amendments. INSPECTION BY RDSO | — | — | — | 53,880.12 | |
| — | 12.00 | — | — | ||
| Supply of adjustable Track Feed Resistance, 30 ohms as per RDSO Drg. Nos. SA- 20161-66M/M with latest amendments (with Phenolic moulded base). INSPECTION BY RDSO | — | — | — | 19,063.92 | |
| — | 800.00 | — | — | ||
| Supply of PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material should Nst be used. INSPECTION BY CONSIGNEE. | — | — | — | 45,096 | |
| — | 37.00 | — | — | ||
| Supply of low maintenance Lead Acid Secondary Cells 2V/ 80 Amp Hr. as per spec. IRS S/88/2004 or latest amendments. INSPECTION BY RDSO. | — | — | — | 76,188.92 | |
| — | 90.00 | — | — | ||
| Supply of Double Walled Corrugated pipe fire resistant and anti- rodent made u p of Polyethylene of Size 103.5 mm inner dia and 120mm outer dia in 6M straight length as per RDSO specification Nos. RDSO/SPN/204/ 2011 with latest amendment along with one coupler per every 6 meters. INSPECTION BY CONSIGNEE. | — | — | — | 29,383.2 | |
| — | 6.00 | — | — | ||
| Supply of "S" shape GI bend pipe Medium class, 50 mm dia. and of 1 mtr length, for cable entry in point machines as per Dy CSTE/C/BPL/011 . INSPECTION BY CONSIGNEE. | — | — | — | 1,543.32 | |
| — | 6.00 | — | — | ||
| Supply of Electric Point Machine (Rotary locking Type) , 110VDC operation (AC immunity 160V) as per RDSO drg. S-11000 with ground connection and clamp lock arrangement suitable or 220mm throw for thick web switches as per IRS S/24/2025 Rev 3.0 or latest. INSPECTION BY RDSO. | — | — | — | 6,18,948.42 | |
| — | 3.00 | — | — | ||
| Component for Clamp type Ground connection for IRS point machines 220 mm stroke as per annexure attached. INSPECTION BY CONSIGNEE. | — | — | — | 91,420.56 | |
| — | 30.00 | — | — | ||
| Supply of William stretcher nylon insulation set suitable for ground connections per RDSO drg Nos T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendment. INSPECTION BY CONSIGNEE. | — | — | — | 17,613 | |
| — | 30.00 | — | — | ||
| Supply of Gauge Tie plate nylon insulation as per RDSO drg Nos: T- 10372Alt2, T- 10368, T- 10371Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23 & 40 with latest amendments as applicable. INSPECTION BY CONSIGNEE. | — | — | — | 8,058.6 | |
| — | 4.00 | — | — | ||
| Supply of hand Held digital Multimetre, True RMS, rechargeable battery Model: Fuke 179/ Mtrsafe-20 or equivalent. INSPECTION BY CONSIGNEE. | — | — | — | 1,61,343.8 | |
| — | 5.00 | — | — | ||
| Supply of Digital insulation and continuity tester as per technical specifications attached at Annexure A. Meco DIT 918/Metravi 913D/UNI-T UT 501A or equivalent or better INSPECTION BY CONSIGNEE. | — | — | — | 44,987.5 | |
| — | 10.00 | — | — | ||
| Supply of Heat shrinkable straight through joint for UG cables with all accessories as per RDSO spec. no."IRS /TC/77/2012 (rev-3) with amend.-1 &2 or latest for 6 quad cable 0.9mm dia (TSF-2)joint suitable for 6 quad cable. INSPECTION BY RDSO. | — | — | — | 19,174.3 | |
| — | 50.00 | — | — | ||
| Supply of Resettable fuse 24-32 V, 2A type Polymeric Positive Temperature Coefficient(PPTC) fuse of make Little fuse/ Fuzetec/Tyco/Bourn/ Raychem, suitable fuses with trip current shall be supplied as per requirement. INSPECTION BY CONSIGNEE | — | — | — | 672 | |
| — | 40.00 | — | — | ||
| Supply of Tag Blocks 200 way with cover as per IRS: S- 77/2006 (Rev. 1) with latest amendment. INSPECTION BY RDSO. | — | — | — | 66,846.4 | |
| — | 5.00 | — | — | ||
| Supply of Key Lock Relay AC immunized with different ward combinations (Five set of same ward plate for Point Machine to be supplied with each relay) of Siemens Make working on 60V DC or functional equivalent. INSPECTION BY RDSO. | — | — | — | 42,777.3 | |
| — | 10.00 | — | — | ||
| Supply of relay universal LED ECR, QECX 61 4F/4B INSPECTED BY RDSO. | — | — | — | 63,289.8 | |
| — | 1.00 | — | — | ||
| Supply of PVC insulated flexible wire 16/0.2 mm dia as per RDSO spec. No. IRS:S- 76/89 with latest amendments of various colours.(Red ,black & grey) with OEM guaranty/ warranty certificate. INSPECTION BY CONSIGNEE. | — | — | — | 6,509.5 | |
| — | 1.00 | — | — | ||
| Supply of Goods warning Board as per RDSO Drg Nos. SA 2380 (Adv). Paint and retro reflective arrangement as per drg Nos BPL/S&T/M/47. INSPECTION BY CONSIGNEE. | — | — | — | 3,106.07 | |
| — | 200.00 | — | — | ||
| Supply of ARA Terminal Block made of PBT as per Drg No SA 23741 alt 3 & spec. No IRS S 75/91 with latest amendments with disconnecting links as per Drg no. RST/11336. INSPECTED BY RDSO. | — | — | — | 18,038 | |
| — | 4.00 | — | — | ||
| Supply of powder coated Relay Rack Assembly complete with scaffolding, fixtures and accessories including MS Bars / relay frames for fixing of relay plug boards, string rods, J-bolts, insulators, fuse strips with bracket, 11 Way Bus Bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. Siemens' type or equivalent & as per extant practice on W.C. Rly. Typical part list as per Annexure-H and Rack arrangement as per Sketch Nos Sk-727 and Rack plan as approved by Engineer in charge. Rack should be made of first class steel powder coated painting and rack manufacturer's certificate should be submitted. All runway for cables / wires shall be provided with PVC sleeve of proper size. ( INSPECTION BY CONSIGNEE.) | — | — | — | 1,28,441.8 | |
| — | 1.00 | — | — | ||
| Supply of Pre-wired Crank Handle cum key lock relay box along with LEDs, TEKNIC/SIEMENS make push buttons, 8-way terminal strips/wago terminal, string rod, etc.as per Drawing Nos.RST.C.111A INSPECTION BY CONSIGNEE. | — | — | — | 11,471.2 | |
| — | 1.00 | — | — | ||
| Supply of tool kit as given below or equivalent suitable for digital axle counter. a) Service test panel including meter for test of track equipment, Zig and torque wrench, hole drill machine and any other item for installation, testing, commissioning, mounting and adjustment required, shall be included in the list of tool kit as per manufacturers specification. Typical list is mentioned below. i) RMS multimetre with probe (Fluke-289) - 1No, i) Adjustable torque wrench with 13mm & 19mm inserts - 1set, i) Screw driver set including soldering iron with mains tester, Taparia/ Jhalani make: 1Set, i) Dummy Wheel. i) Marking Zig (90R, 52Kg & 60Kg Rail) - 1Set. i) Extended wire socket to interface with diagnostic plug. - 1No, i) Selector switch on panel - 1No. i) 19mm double ended spanner 01 No.13mm spanner 01 No.27/32mm spanner to tighten deflector plates02 Nos . i) Carry case (VIP or SAFARI) 1 No. x) Hole drill machine .Wolf make or similar 750VA or above drilling holes of size 13mm and above -1 No. INSPECTION BY CONSIGNEE | — | — | — | 1,37,648.75 | |
| — | 20.00 | — | — | ||
| Supply of Concrete Cable Route Marker as per drawing SDO/Cable Laying/020. INSPECTION BY CONSIGNEE | — | — | — | 6,460.8 | |
| — | 40.00 | — | — | ||
| Supply of Chlorinated rubber Paint as per IS 13467 : 1992 suitable for applying on insulated rail joint. Colour:- Grey. Packing-In 20 litter Drum/cane. (Warranty Period : Up to 12 months from the date of supply) | — | — | — | 5,992.8 | |
| — | 40.00 | — | — | ||
| Silane siloxine Alithatic Urethane resin blend solvent based paint similar to Cyprus make or Co-polymer thermoplastic based coating similar to Corrkil-E polyurethane based heat resistant paints similar to Matcorr PU25 or any other RDSO approved heat resistant paints (should have effectiveness of 7degree to 5 Degree centigrade reduction when compared to conventional paints with maximum of three coats for GRS box full or similar item ) previously supplied to railways. To be supplied in manufacturers original packing in sealed condition. Sample Shall be approved before bulk supply. FIRM'S OFFER: MAKE / BRAND - OEM ( Warranty Period : Up to 12 months from the date of supply) INSPECTION BY CONSIGNEE. | — | — | — | 83,780 | |
| — | 5.00 | — | — | ||
| Supply of PVC insulated railway signalling indoor single core [ tinned jumper wire] 1 x 0.6mm dia, different colours, blue: 60%, red:15%, gray: 20% and brown: 5%. with OEM guaranty/ warranty certificate INSPECTION BY CONSIGNEE. | — | — | — | 20,490.15 | |
| — | 2.00 | — | — | ||
| Supply of Earth Leakage detector 8 channel card (2 channel card for monitoring AC and 6 channel card for monitoring DC voltages) as per RDSO Spec No RDSO/SPN/256/2025 ver 2.0 with latest amendment. INSPECTION BY RDSO. | — | — | — | 2,18,391.08 | |
| — | 100.00 | — | — | ||
| Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 1.6 A (System, Rapid or Malnad Make or similar). INSPECTION BY CONSIGNEE | — | — | — | 8,110 | |
| — | 100.00 | — | — | ||
| Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 0.6A (System, Rapid or Malnad Make). INSPECTION BY CONSIGNEE | — | — | — | 7,771 | |
| — | 1.00 | — | — | ||
| Supply of Remote terminal unit (RTU) with 128 digital inputs and 16Analog inputs as per RDSO spec No :IRS:S:99/2006 (Amendt.3) or latest which includes dual Port Voice modem card and provision of one number of T- Networking modem connectivity with the existing data logger . INSPECTION BY RDSO. | — | — | — | 2,38,075.35 | |
| — | 5.00 | — | — | ||
| Supply of Shunt signal Group (Ref:IRS:S-46). SIEMENS Make (No.RSSK 3526/67) or Equivalent with base Plate & suitable for LED shunt Signal. (Suitable for existing Installation INSPECTION BY RDSO. Baseplate inspection by consignee | — | — | — | 3,36,070.55 | |
| — | 50.00 | — | — | ||
| Supply of Domino units with cover plates as per approved panel diagram, each of size 54 x 34mmcompletely wired up similar to Siemens make. Each domino unit should have all the 15 contact terminals wired up. INSPECTION BY CONSIGNEE. | — | — | — | 46,302.5 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multi strand copper conductors, 1x10sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY / WARRANTY CERTIFICATE | — | — | — | 1,23,802.79 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multi strand copper conductors, 1x16 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY / WARRANTY CERTIFICATE. | — | — | — | 1,83,089.98 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multi strand copper conductors, 1x25sq.mm confirming to RDSO specification IRS:S: 76/89with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY / WARRANTY CERTIFICATE. | — | — | — | 2,80,738.34 | |
| — | 1.00 | — | — | ||
| Supply of permanently lubricated HDPE Telecom Duct, 40/33 mm, as per TEC GR/CDS/08-02 NOV-04 , along with accessories as below: (to be procured from RCIL approved sources). INSPECTION BY CONSIGNEE | — | — | — | 53,645.12 | |
| — | 5.00 | — | — | ||
| Supply of End Plug INSPECTION BY CONSIGNEE | — | — | — | 198.9 | |
| — | 5.00 | — | — | ||
| Supply of Cable Sealing Plug. INSPECTION BY CONSIGNEE | — | — | — | 269.3 | |
| — | 5.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .