Renovation of Ground floor Rooms including Corridor and Toilets of CTCRS Building, Anushaktinagar, Mumbai.

Amount

Section (A) -CIVIL WORK Providing clean tarpauline of required size & 100 Micron thickness for covering the furniture and cupboards and tying them with ropes so as to keep them safely including removing them after completion of work & using them in rotation for other rooms as per direction of Engineer-in-charge. Note : Payment of tarpauline will be done only once.

DISMANTLING PLAIN CEMENT CONCRETE manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200m lead as per direction of Engineer-in-charge.

DISMANTLING BRICK WORK in cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100m lead as per direction of Engineer-in-charge.

DISMANTLING BRICK BAT COBA CEMENT BASED WATER PROOFING over roof and chajjas carefully with out damaging adjacent structures including lowering and stacking of materials and disposal of unserviceable materials within 200m lead as per direction of Engineer-in-charge.

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tile up to 25mm etc. complete as directed by Engineer in charge.

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tiles above 25mm and up to 40mm.

DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100m lead.

Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part Il, mixed with Keroscene and chemical and giving post Anti-termite treatment to wooden door and window frames of existing buildings as per manufacturers specifications or as specified and as directed by the Engineer-in-Charge. Work to be executed by approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer€ Payment will be cleared only after submission of guarantee.

Providing Core cutting in RCC beyond 100 mm up to and including 150 mm Dia etc. complete as directed by Engineer-in-Charge.

LEAD CHARGES FOR LEAD OF DEBRIS by mechanical transport including loading, unloading, stacking / levelling etc. Notes : 1. The rates are applicable for NET Quantities arrived after making deduction for voids @ 30% from corresponding TRUCK Measurement. 2. Finding authorised ground for disposing debries, transporting of debries at disposal ground, disposing, stacking, leveling & statutory charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after accumulation of minimum one Truck Load.

Debris Beyond 4 Km but up to and including 5 Km.

Debris Beyond 5 Km for every 1KM or part thereof

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge. Using 100% SFMC

Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge. In Superstructure

Providing REINFORCEMENT FOR REINFORCED CEMENT CONCRETE at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Steel Supplied by the Contractor. Using TMT bars of specified grade all dia bars to be supplied by the contractor manufactured by approved brands of BARC only Confirming to IS:1786. All test reports to be provided along with supply of materials.

Using TMT bars of specified grades all dia. bars TMT bars to be supplied by the contractor confirming to IS 1786. All test reports to be provided along with the supply of the materials.

Providing and constructing BRICK WORK in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge. Brickwork in super structure with standard bricks in C.M 1:4 using crushed sand.

Providing and Laying AUTOCLAVED AERATED CEMENT BLOCK MASONRY of approved make with specified thick AAC Blocks in Super structure above plinth level up to 20 m height in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work.

Providing 15 mm THICK PLASTERING USING READY MIX INTERNAL PLASTERING COMPOUND of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing 20mm THICK EXTERNAL PLASTERING in two coats under layer 12mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10m height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge.

STRUCTURAL REPAIRS WORKS WITH PRE-PACKED DUAL SHRINKAGE CONTROLLED (volume stable in wet & hardened state), single-component ready-to-use, structural grade high build, alkali-resistant, fibre reinforced, thixotropic polymer modified repair mortar having excellent bond strength to old damaged concrete structures / surfaces by the following process: 1) Removal of loose/spalled or damaged concrete by chipping and cleaning the concrete surface to open up to 20mm behind the reinforcement steel with wire brush and with clean water including removal of dirt, paint, wax, oil, grease, laitance, foreign substances, etc. Mechanically profile and prepare concrete surfaces by abrasive blasting, water jetting or other engineer approved methods. 2) Cleaning the rebars with Acetone for complete rust removal and washing with water to make the surface clean. Ensure that the concrete substrate and ambient temperatures are between (10°C and 35°C) before application. 3) Applying protective coat / bond coat using Styrene Butadiene Rubber (SBR) polymer and cement in the proportion of 1: 1 (1 part of polymer : 1 parts of cement). 4) Mixing full 25 Kg bag with clean potable water in water to product ratio of 0.12 to 0.18), mixed by heavy-duty slow speed (300 to 600 rpm) drill with spiral mixing paddle or forced action pan mixer pan for 3 minutes to achieve uniform lump free mortar consistency. 5) Applying polymer modified mortar with trowel & float. The polymer modified mortar shall have the following properties/technical parameters: (A) Properties / technical parameters of pre-packed Polymer Modified Mortar: i) Compressive strength 1 day: Min. 20 MPa (as per BS:6319 : Part 2) ii) Compressive strength 7 days: Min. 35 MPa (as per BS:6319 : Part 2) iii) Compressive strength 28 days: Min. 45 MPa (as per BS:6319 : Part 2) iv) Flexural strength in 28 days: Min. 7 Mpa (as per BS:6319 : Part 3) v) Tensile strength in 28 days: Min. 2.5 MPa (as per BS:6319 : Part 7) vi) Bond strength: Min. 5 MPa (as per ASTM : C881) vii) Water permeability: less than 1% (as per ASTM : C881) viii) Drying shrinkage in 28 days: less than 1000 microstrain (as per ASTM C 157-93) ix) Potential Alkali Reactivity - : <0.1% Expansion % (ASTM C1260) (B) Properties / technical parameters of SBR polymer bond coat material: i) Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards ii) Total solids % by mass at 105°C: 38 + 1 iii) pH value: 7.5 to 9.5 iv) Specific gravity at 27.5°C: 1 to 1.05 v) Coverage: 4.2 - 4.5 sq.m/kg per coat. Notes:- (a)Placing and finishing the same with trowel / hand packing carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, columns, etc. (b) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per process no. (3) mentioned above in the BOQ item, to be applied and further thickness of repair to be continued for each layer. (c) The surface preparation & method of application shall be as per manufacturer's technical data sheet. (d) The double tubular steel scaffolding will be paid separately in relevant item. (e) Sampling and testing of cube specimen for compressive strength test shall be as per BS 6319 - Part-2.Other tests mentioned above shall be carried out if required as per the direction of the EIC and the cost of which shall be deemed to be included in the quoted rate (f) For each batch of mortar mixed, following records, i.e Quantity of mortar (kg) mixed, Amount of water added to the mix, Location of application and the area covered.(g) Payment will be paid on the basis of actual consumption of PMM & Reinforcement will be paid in the relevant item. (h) Safety Precuations:- Use wear tight-fitting, dust-resistant, chemical splash goggles and dust respirator, if airborne dust is generated, wear protective rubber hand gloves, wear appropriate clothing to prevent any possibility of skin contact. The above item of work is inclusive of all materials, labour, machinery, tools & tackels, consumables, trasportation, loading & unloading, safety PPEs etc. all complete as directed by Engineer-in charge at site using approved pre-packed polymer modified mortar suitable for structural repair works.

Providing STRUCTURAL REPAIRS IN OLD DAMAGED CONCRETE STRUCTURES / SURFACES WITH APPROVED POLYMER with following operations:- 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg : silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand : 0.75 Kg silica sand : 200 ml polymer) 1.00 Lit 609.00 671.005) If thickness of repair exceeds 20mm , after every 20mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item.

Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the interior side upto 10 m height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. Note: 1) Scaffolding shall be erected as per the provisions of IS 3697. 2) All safety precautions and measures shall be taken as per BARC Construction safety Manual.

Providing and laying WATER PROOFING TREATMENT IN SUNKEN PORTIONS of WCs, BATH ROOMs etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m. including injecting cement layer of slurry of cement @ 0.242 kg / sq.m mixed with waterproofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixing fibres at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion.complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas. Note: 1. The waterproofing treatment is to be Guaranteed for bone dry condition for a period of 10 years. 2. The cement required for the treatment is to be supplied by contractor 3. The measurement for payment shall be the actual area covered by the treatment.

Extra over 120 mm thick cement based water proofing for providing and laying BRICK BAT COBA in roof (i) Laying brick bats with mortar using broken brick bats 25 mm to 115 mm size with 50% of cement mortar 1:4 (using crushed sand) admixed with proprietary water proofing compound as per manufacturer's specifications conforming to relevant IS and approved by Engineer-in-charge over 20 mm thick layer of C.M 1:4 (using crushed sand) to required slope complete as directed by the Engineer-in-charge. (Measurement will be over and above the average thickness of 120 mm only)

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs and including aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification. Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.

Providing and applying FRENCH SPIRIT POLISHING One coat on old work including preparation of the surfaces, sand papering complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing 1st quality CERAMIC GLAZED FLOOR TILES of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing GLAZED VITRIFIED FLOOR TILES of required size in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Tiles of size 600 x 600 mm of approved shade & colour for Passage area

Tiles of size 800 x 1600 mm of three or more shades to make design pattern as per architectural drawing of approved shade & colour in Lift lobby area for floor and walls

CUDDAPAH STONE SLAB OVER KITCHEN PLATFORM etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.

Providing, supplying and laying pre polished granite slab flooring/dado and wall cladding with 15-17mm thick granite slabs over 20mm thick base cement mortar 1:4 (using crush sand) laid and placed with grey cement slurry including filling the joints with matching white cement base tile grout complete all as per specification and drawings.

using approved black shade

Using approved shades other than black

Extra for providing EDGE MOULDING 15 TO 17mm THICK GRANITE SLAB counters, Vanitis etc. including machine polishing to edge to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.

Providing and laying FLOORING PLASTER OF PARIS 8mm THICK OVER NEW LAID TILES including spreading polythene paper, curing, levelling, removal and disposal of same before cleaning floor, labour, tools etc. complete and as directed by Engineer in charge.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area 3.00 Sq.M and below.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area beyond 3.00 Sq.M.

DISMANTLING ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Providing WOOD WORK IN FRAMES OF DOORS, WINDOWS, CLEAR STORY OPENINGS and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the surface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. Using Second class teak wood only.

Providing and fixing 35mm THICK FLUSH DOOR SHUTTERS conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed

Supplying, Providing and fixing BEADING (ARCHITRAVE) of size 50mm to 65mm wide and 12 mm thick using 2nd class teak wood around the door frames with necessary screws and fixing laminated sheet on top etc. complete as directed by the Project Engineer.

Providing VISION PANEL not exceeding 0.1 sqm in all type of flush door including fixing 4 mm Clear Glass with necessary teak wood Beadings complete all as per specifications and as per Drawings.

Providing LOUVERED OPENING IN DOOR SHUTTERS including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work & beading & applying one coat of approved wood primer etc. complete.

Providing, supplying and fixing Venetian Roller Blinds of approved make with all accessories and fabricating to required sizes etc. as per approved design and approved fabric complete all as directed by the Engineer-in-charge.

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing MORTICE LATCH AND LOCK of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Providing and fixing ALUMINIUM TOWER BOLTS OF SIZE 250mm X 12mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing ALUMINIUM HANGING HEAVY QUALITY FLOOR DOOR STOPPER ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing stainless steel ball bearing fire tested stainless steel butt hinges of size 100 x 75 x 3.00 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. fange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long ( 6 Nos for each handle) ,cost of labour, tools, tackles ,wooden gutties, plants, transportaion, scaffolding etc. all complete as per site requirement and as directed by Engineer in charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing ANODISED ALUMINIUM BABY LATCH of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing 12mm thk BWP marine on existing partition frame / wall / etc. with necessary hardware with 1mm laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing and fixing 18mm thk BWP marine ply on existing partition frame / wall / etc. with necessary hardware with 1mm laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing and fixing 25 mm thick Colour PVC Integral Foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Providing and fixing ANODIZED ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for COLOUR ANODIZING / DYED ANODIZING

FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providing and fixing GLAZING IN ALUMINIUM DOORS, WINDOW, VENTILATOR shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge (Cost of snap beading shall be paid in basic item)

With frosted glass panes of 5.00 mm thickness

With Clear Float Glass panes of 5.00 mm thickness

With colour one side reflective glass panes of 6.00 mm thickness

Providing and fixing Approved Quality STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters

Providing and fixing Approved Quality and shape LOCKS cum Handle for Sliding shutters.

Providing and fixing in position suspended false ceiling system using 600 x 600 mm mineral fibre reinforced factory applied vinyl painted ceiling tiles Tiles having 16/15mm thick, and approvred surface design and edge profile placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 32mmx shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. The cross tees of size 24 x 27 x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 25 x 600mm shall be inserted to form a grid size of 600x600mm resting on the perifery walls on wall angles of size 24mm x 24mm including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mm x 50mm, soffit clits of 25mm x 35 x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/sq.m (Only Armstrong false ceiling area will be measured for the purpose of payment) Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Armstron make (ELITE-16MM / 'Fine Fissured-16MM / 'Classic Lite-15mm) or approved equivalent make

Providing and fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board suspended ceiling, which includes CRP surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the channel at 457.5mm centres. Single layer of 12.5mm tapered edge (conforming to BS 1230 part 1) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper tape and two coats of drywall top coat. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Saint- Gobain Gyproc India or approved equivalent make

Providing and Fixing Veneered/Wooden Grill forte pre-laminated ceiling with notched and diagonal backers. 3 slat panels of size 300 mm x 1830 mm, slat width 25mm, slat height 100 mm, slat spacing 50mm, suspended from ceiling with heavy duty prelude grid with pre drilled backer holes complete in all respects as per direction of Architect / Engineer-in-charge.

Providing and Fixing of 150mm wide, 25mm thick, 2700mm Length Acoustic Real Solid flutted ThermoAsh Thermo-treated perforated wooden panels, with tongue and groove Joints, fixed with aluminium Z bar, over 50mm X 25mm anodised aluminium framework, with Polywool infill and acoustic fleece, complete in all respects as per Architect / Engineer-in-charge.

Designing, Providing & Fixing decorative Glass block partition with hollow glass block of required size. The blocks to be fixed with glass block mortar adhesive. Glass block Size 7.5" x 7.5" x 4" complete all as per specifications and drawings complete in all respects as per direction of Architect / Engineer-in-charge.

Designing, Providing & Fixing 5 mm thick @ 13.65 kg/SqM perforated Stainless steel sheet of 304 grade for partition / railing etc using necessary Stainless Steel studs. Size of perforation: 5-15 mm complete in all respects as per direction of Architect / Engineer-in-charge.

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with not less than 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.

Using approved black shade / Leather finish

Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

REMOVING FLAT BACK URINALS / EWC / OWC / AIWC carefully along with the cast iron / ceramic / plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by Engineer-in-charge.

REMOVING HAND WASH BASIN carefully alongwith bottle trap, stop cock, pillar tap, brackets & PVC connections carefully & stacking the the same as directed in Civil Maintenance Stores at BARC Hospital as directed by Engineer-in-charge.

DISMANTLING FLUSHING CISTERN of any size including all its accesseries, removing bracket screws including stacking of useful materials near the site and disposal of unserviceable materials within 100m lead as directed by Engineer-in-charge.

DISMANTLING G.I. PIPES OF ALL DIAMETER EXTERNAL WORK including excavation and refilling trenches after taking out pipes manually/ by mechanical means including stacking of pipes within 100m lead as per direction of Engineer-in-charge. Note: measurement shall be considered as centre line measurements of pipes of all dia. including fittings & fixtutes & no extra payment shall be made for the attached fittings & fixtures.

Providing and fixing Heavy quality FLEXIBLE PVC WASTE PIPE of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge. 32 mm dia flexible PVC (semi-rigid) waste pipe.

Providing and fixing 15mm PVC INLET CONNECTION SUITABLE FOR HOT AND COLD WATER 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge.

Providing and fixing heavy quality STAINLESS STEEL / C.P. BRASS GRATING of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge. SS grating 125 mm dia

Providing and fixing LIQUID SOAP DISPENSER etc. complete in all respect as per specifications and as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. EURONICS (ES-05) or equivalent make

Providing and fixing C.P. BRASS OPEN STOP COCK of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP Brass open stop cock of approved make and type

Providing and fixing C.P. BRASS BIB COCK of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia Bib cock of approved Equivalent type and make .

Providing and fixing 15mm C.P. BRASS 2 IN 1 BIB COCK AND ANGLE COCK combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy quality HEALTH FAUCET with 1.50 metres long flexible hose (Hand Shower / Hand Spray) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge

Providing and fixing stainless steel TOILET PAPER HOLDER recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.

Providing and fixing heavy quality CP BRASS BOTTLE TRAP 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

Providing and fixing heavy quality C.P. BRASS WASTE COUPLING of following dia for wash basin and sink, of approved make, size and quality all as directed complete C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.

Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China wash basin size 630 x 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing INDIAN WATER CLOSET (ORISSA PAN) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white VITREOUS CHINA EUROPEAN TYPE WATER CLOSET with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing white VITREOUS CHINA FLAT BACK HALF STALL URINAL size 580 x 380 x 350 mm / 610 mm of approved make and model with Push cock of approved make, with CP Brass flush pipe unions, Heavy Quality C.P. brass Spreaders, C.P waste coupling with dome grating,clamps complete all as per specifications drawings and as directed at site.

Providing and fixing CHINAWARE HALF ROUND URINAL CHANNEL 100 / 150 mm dia with or without dead ends set in C.M 1:3 laid to proper slope & grade including finsihing the joints with polymer based tile grout mix as per drawing and as directed by the Engineer-in-charge

Providing and fixing 15mm C.P. BRASS URINAL SPREADER size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.

Providing and fixing Brass 15 mm C.P. BRASS AUTO SHUT URINAL FLUSH COCK of approved quality. Note : Tentative/suggested make for the guidance of the bidder (s) : PRESSTOMATIC SERIES or equivalent make

Providing and fixing PVC LOW LEVEL / HIGH LEVEL FLUSHING CISTERN 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing cast iron NAHANI TRAP / FLOOR TRAP of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2:4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating, complete all as specifications and drawings and as directed by the Engineer-in-charge.

Providing and fixing 6mm THICK MIRRORS OF SIZE 600mm X 450mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Extra for providing and fixing mirrors with approved make- stainless steel 304 grade STUDS (with wall spacers) complete all as per specifications and as directed by the Enginner-in-charge

Providing and fixing SOLID PLASTIC SEAT of approved colour suitable to existing EWC with lid including CP brass / SS bolts, screws etc. for pedestal type W.C. pan complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer

15 mm outer dia CPVC pipe (External) / Open

20 mm outer dia CPVC pipe (External )/ Open

25 mm outer dia CPVC pipe (External )/ Open

32 mm outer dia CPVC pipe (External )/ Open

40 mm outer dia CPVC pipe( External )/ Open

Providing & fixing in position heavy pattern screw down GUN METAL GATE VALVE with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge.

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 or Cast Iron hubless pipes confirming to IS 15905 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

Providing and fixing C.P. BRASS TOWEL RAIL of 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing, supplying and fixing HOLLOW METAL FLUSH STEEL DOORS 40mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge.

Fabrication, supply and installation / fixing on wall of SS lettering in English 'CT & CRS " letter shall be of SS304 grade Imported SS Gold PVDF Coated , 18" HT., 25 mm deep; 1.2mm thick and proportionate width as per approved shop drawings and technical specifications and as directed by the Engineer-in-Charge.

Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed at site.

Providing, applying wall painting two coats on old work with premium PLASTIC EMULSION PAINT of approved brand to give an even shade with a coat of cement primer, including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of SYNTHETIC ENAMEL PAINT on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing 3 level polishing including Mirror Polishing of Terrazo / STILAN / Kotah stone flooring complete as directed by the Project Engineer.

Supplying, stacking and laying of 230mm THICK RUBBLE SOLING STONES as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machines with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 150 mm thick compacted bed of stone dust / Murrum, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge

Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge

Providing STRUCTURAL STEEL WORK USING ANGLES, CHANNELS, JOISTS AND OTHER SECTIONS, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures etc. complete all as per specifications, drawings and as directed by the Project Engineer. Notes: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. 4) All test reports to be provided along with supply of materials.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. All test reports to be provided along with the supply of the materials

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge

Providing and laying 10 mm Square Brass strip /T Bar for inlay in flooring as per approved pattern, rate includes machine cut precise groove for fixing brass strip and Brass strip should be fixed in floor with required chemical. The quoted rate shall also include all tools & tackles, consumables, Epoxy etc, transportation, and making area good after fixing bass strip, all complete as directed by Engineer-in-Charge.

Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting,window sills in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish complete as per specifications, drawings and as directed by the Engineer-in-charge

Providing , applying one coat of acrylic based textured plaster of approved make with the finish as directed with average thickness of 2.50 mm and finished with 2 coats of high performance coating of approved shade including preparation of the surfaces, complete. as per specifications and as directed by the Engineer-in-charge.

Design, fabrication, supply and installation of frameless openable panels (Swing doors) using clear, toughened float glass of specified thickness openable panels (doors) with crystal edge polish and necessary patch fittings for swing doors, hunged on floor spring, having a length of 1200 mm minimum, S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium ICI channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent/plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. (approximate size of the openings).

Frameless openable panels (swing doors) using 12mm thick toughened float glass for door leaves with the required patch fittings, floor springs, 1200mm long Stainless Steel handles, corner Lock with strike plate and cylinder.

Providing and fixing Stainless Steel Plate of 2mm Thick and of size 900mm x 600mm etched with alphabets as mentioned under : Government of India, BHABHA ATOMIC RESEARCH CENTRE, CENTRE FOR TRAINING AND CERTIFICATION IN RADIOLOGICAL SAFETY, INAUGUARATED BY Dr. R.CHIDAMBARAM, Chairman, Atomic Energy Commission & Secretary, Department of Atomic Energy, October 28, 1997. The letter shall be as per existing logo and as directed by the Engineer in-Charge.

Design, fabrication, supply and installation of frameless Facade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittings for swing doors, hunged on floor spring, S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent / plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Note : Shop drawings to be prepared by the contrator as per the site conditions and the same shall be got approved by Engineer in charge before procurement.

Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealents etc complete. Glass area alone shall be measured and paid.

Providing and fixing 12mm BISON board including adhesive material, screw, etc. as directed by Engineer -In charge

Providing and fixing 3mm thick veneer approved make and shade fixed over suitable base like cement board in wall cladding, etc.The quoted rate shall includes all tools and trackles,consumables,nails and screws, etc. transportation, labours, all complete as per direction of Engineer-in-charge.

Providing & Applying SEAMLESS ACRYLIC BASED CHEMICAL WATERPROOFING SYSTEM with minimum 1 mm DFT (Dry Film Thickness) including surface preparation as per general notes, primer coat, reinforcing membrane (minimum 45 GSM) and multiple layers of chemical coat (2 to 3 coats as per manufacture specification), removing the existing damaged water proofing treatment, if any, all complete as per the manufacturers specifications and as directed by Engineer-in-Charge, using Damp Proof all conforming to the following technical specifications or standard to satisfy the site requirements. Chemical properties: (i) Physical/chemical parameters such as specific gravity, solid contents, Tensile strength, viscosity etc. shall be tested as per relevant test method of IS/ASTM/DIN and shall conform to the approved manufactures product and specification. (ii) Elogation: 100% minimum (iii)UV Resistant: Continuous 500 hrs (min) as per ASTM D4587. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Smartcare Damp Proof of M/s. Asian Paints

Over terrace slab,top of water tank and parapet,etc.at all levels.

Providing and fixing minimum 15-17 mm thick gang saw cut mirror polished machine cut artificial granite / korean stone of approved shade and make for flooring kitchen platforms, vanity counters, window sills, facias and similar location of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand ) with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Supplying of Unskilled man power / labour for loading / unloading, area cleaning and miscworks. etc. including cost of equipement whichever is required at site.

Section (B)- Electrical Work Supply and installation of following lighting fixtures as per tender specification.

30W 600mm x 600mm recess type LED lighting fixture

200/185mm dia recess type LED lighting fixture

100mm dia recess type LED lighting fixture

Linear LED suspended Light

LED Rope light 8W/meter along with driver

20W Surface mount rail type LED lighting fixture

40Wsurface mount rail type LED lighting fixture

10 W 2ft rail type LED lighting fixture

Wall mount LED painting light

Supply and installation of Suspended decorative pendent light as per tender specification.

Supply and installation of 36W 600mm x 600mm surface mount LED lighting fixture as per tender specification.

DLP & accessories: Supply and installation of 80 mm x 50 mm Duct/Trunking along with cover, bend, end plate and accessories as per tender specification.

Supply and installation of following casing capping along with cover and accessories as per tender specification.

32 mm X 12 mm casing capping

32 mm x 16 mm casing capping

Supply and installation of 25 mm FR PVC conduit along with accessories as per tender specification.

DB: Supply, installation, testing and commissioning of following DB as per tender specification

8 Way PPI DB

12 way SPNDB

8 Way VTPN DB

Modular box: Supply and installation of following surface mount modular box along with faceplate and cover as per tender specification

8 module box

4 module box

2 module box

Switches: Supply, installation, testing and commissioning of following modular switches as per tender specification

16A SP switch

6A SP switches

Blanking plates

Sockets: Supply, installation, testing and commissioning of following sockets as per specification

6/16A sockets (3Module)

6A sockets (2 Module)

Data Points: Supply, installation, testing & commissioning of data points as per specification

Cat6 UTP Cable: Supply, installation, testing & commissioning of Cat-6 cable as per specification

Point wiring : Supply, installation, testing and commissioning of point wiring as per tender specification.

Wiring with 2.5 sq.mm copper wire (Primary switch box point for light/ fan)

Wiring with 2.5 sq.mm copper wire(Secondary switch box point)

Wiring with 2.5 sq.mm copper wire (Primary power point)

Wiring with 2.5 sq.mm copper wire (Secondary power point)

Wiring with 1.5 sq.mm copper wire (Primary light/fan point)

Wiring with 1.5 sq.mm copper wire (Secondary light/fan point)

Wiring with 4 sq.mm copper wire (AC/Geyser point)

LT power cable : Supply, installation, testing and commissioning of following 1.1 kV, copper conductor, XLPE insulated, PVC sheathed FRLS cables as per tender specifications.

4 C x 6 sq.mm copper conductor armoured cable on surface

End termination of cables : End termination of following copper conductor, XLPE/rubber insulated, PVC sheathed cables with copper lugs, single compression type brass glands, earthing etc as per tender specifications.

4C x 25sq. mm Al /Conductor cable

4C x 10/16 sq. mm Cu /Conductor cable

4C x 6 sq. mm Conductor cable

Earthing Conductor: Supply and installation of 8 SWG bare copper earth wire to be installed in trenches, ground, wall, RCC, slab, above false ceiling, trenches etc. as per tender specifications.

Supply, installation, testing and commissioning 20 A metal single phase metal clad socket and three pin top with 20A DP MCB in separate box MS box for geyser/Heater as per specifications

Supply, installation, testing and commissioning 20 A metal three phase + N+E metal clad socket and top with 20A 4P MCB in MS box for AC as per specifications

Dismantling/removal and recovery of following equipment

Change over switch/ MCCB in box/ SFU/ DBs/control panels etc

Lighting fixtures/switch boards/power points

MS pipe/ PVC pipe/ casing capping/trucking

Removal for cat6/fire alarm/cctv cable

Supply, installation, testing and commissioning 24 port layer 2 switch as per specifications

Removal and re-installation for following items as per tender specifications

CCTV cameras

Fire Alarm detectors/hooters

Fire alarm/CCTV/CAT 6 cable

Supply, installation, testing and commissioning of Beam detectors and integration with existing fire alarm panel as per specifications.

GI box: Supply and installation of following GI conceal boxes as per specifications

8 module box

4 module box

2 module box

Supply, installation, testing and commissioning of 50 mm x 50 mm GI cable race way (Tray) with cover as per specifications

Supply and installation of 32A MCB in a Box suitable for outdoor as per specifications

Supply and installation of 24 port patch ( RJ 45) panel as per specifications

Section C (Mechanical Utility & Air-conditioning System Work) Supply, installation, testing & commissioning of Floor Standing Type Split AC units of 3 TR Nominal Capacities as per technical specification

Section D (PSS) Supply, Installation, Testing and Commissioning of Standard 02+01 Lane Retractable Capsule Flap Barrier as per TSS-PPS-01.

Supply, Installation, Testing and Commissioning of RFID Readers for Standard 02+01 Lane Retractable Capsule Flap Barrier as per TSS-PPS-02

Supply, Installation, Testing and Commissioning of Mobile and laptop lockers as per TSS-PPS-03

Sai Sales Corporation (BID ID -3219907)

UCC INFRASTRUCTURE PVT LTD (BID ID -3216815)